Scaling properties of phase-change line memory

Phase-change line memory cells with different line widths are fabricated using focused-ion-beam deposited C-Pt as a hard mask. The electrical performance of these memory devices was characterized. The current-voltage (I-V ) and resistance-voltage (R-V ) characteristics demonstrate that the power consumption decreases with the width of the phase-change line. A three-dimensional simulation is carried out to further study the scaling properties of the phase-change line memory. The results show that the resistive amorphous (RESET) power consumption is proportional to the cross-sectional area of the phase-change line, but increases as the line length decreases.     

Gain-assisted indented plasmonic waveguide for low-threshold nanolaser applications

A subwavelength plasmonic indented waveguide with an active InGaAsP core is proposed.The characteristics of the gap plasmon mode and gain required for lossless propagation are investigated and analyzed by the finite element method.We numerically calculate the normalized mode areas and percentages of energy confined in InGaAsP and metal for plasmonic nanolaser applications.It is shown that the indentation of the sidewalls has an optimal value for which the lasing threshold gain is minimal.The structure could enable low-threshold subwavelength lasing and applications for optoelectronic integrated circuits.     

基于粒子滤波的一种改进的资料同化方法

针对在粒子数较少时传统的集合卡尔曼滤波和粒子滤波方法不能有效表征后验概率密度函数(PDF)的问题, 提出了一种改进的粒子滤波方法. 主要思想是在预测步之后引入更新步, 并且将观测时刻与非观测时刻的同化分析进行区别处理. 对典型的低维和高维混沌系统的仿真结果表明:改进粒子滤波方法是一种非常有效的估计非线性非高斯随机系统状态的方法.     

Room-temperature ferromagnetism of Cu ion-implanted Ga-doped ZnO

1 MeV Cu²⁺ ions have been implanted into un-doped ZnO and Ga-doped ZnO films with a dose of 1 × 10¹⁷ ions/cm² at room-temperature. Cu ion-implanted Ga-doped ZnO had ferromagnetism at room-temperature and the saturation magnetization of this sample was estimated to be 0.12 μ_B per Cu, while the Cu ion-implanted un-doped ZnO did not show ferromagnetic behavior. Near-edge X-ray fine structure (NEXAFS) spectroscopy revealed that a partial amount of implanted Cu ions existed as Cu²⁺ (d⁹) state in Ga-doped ZnO film. On the other hand, almost Cu atoms existed as Cu¹⁺ (d¹⁰) state in un-doped ZnO film. However, the subsequent annealing at temperature above 800 °C on this ferromagnetic sample induced the annihilation of ferromagnetism due to the formation of non-ferromagnetic Cu₂O phase.     

红外热不对称分析用于面神经功能损伤的客观评估

健康人体的温度分布存在一种双侧对称性,当面神经功能受损时,将改变这种热分布的对称性。人体热量大多通过红外辐射的形式散发,因此利用红外热成像技术可以有效捕捉这种红外热辐射分布的改变。本文提出一种新的热不对称分析的方法——有效热面积比,即计算面部特定区域与对侧区域的温差乘以温度异常区面积与总面积之比。利用这种方法对面神经功能损伤的患者和健康人群作对照性试验,结果显示:此方法的特异性和敏感性平均为0.90和0.87,比常规方法提高了7%和26%,有效热面积比与面神经功能的损伤程度正相关,平均为0.664。因此,关于诊断和评估面神经功能,红外热成像是一种有力的工具,有效热面积比是一项高效的临床指标。     

Photocatalytic degradation of methyl orange by nano-TiO_2 thin films prepared by RF magnetron sputtering

Nano-TiO2 thin films are deposited by radio frequency （RF） magnetron sputtering using TiO2 ceramic target and characterized by X-ray diffractometer, atomic force microscope, and ultraviolet-visible spectrophotometer. The photocatalytic activity is evaluated by light-induced degradation of methyl orange solutions （5, 10, and 20 ppm） using a high pressure mercury lamp as the light source. The film is amorphous, and its energy gap is 3.02 eV. The photocatalytic degradation of methyl orange solution is the first-order reaction and the apparent reaction rate constants are 0.00369, 0.0024, and 0.00151 for the methyl orange solution concentrations of 5, 10, and 20 ppm, respectively.     

Epidemic spreading in scale-free networks including the effect of individual vigilance

In this paper, we study the epidemic spreading in scale-free networks and propose a new susceptible-infected-recovered (SIR) model that includes the effect of individual vigilance. In our model, the effective spreading rate is dynamically adjusted with the time evolution at the vigilance period. Using the mean-field theory, an analytical result is derived. It shows that individual vigilance has no effect on the epidemic threshold. The numerical simulations agree well with the analytical result. Furthermore, we investigate the effect of individual vigilance on the epidemic spreading speed. It is shown that individual vigilance can slow the epidemic spreading speed effectively and delay the arrival of peak epidemic infection.     

Temperature dependence of radiation-induced attenuation of optical fibers

We investigate the temperature dependence of radiation-induced attenuation (RIA) at 1 310 nm for a Ge/P co-doped fiber after a steady-state γ-ray irradiation.A γ irradiation facility 60Co source is used to irradiate the fiber at a dose rate of 0.5 Gy/min,satisfying a total dose of 100 Gy.The test temperature ranges from-40 to 60℃ by 20℃,and the RIA of the fiber is obtained using a power measuring device.The experimental result demonstrates that RIA exhibits a steady,monotonic,and remarkable temperature dependence after approximately 48h of accelerated annealing at 70℃.The optical fiber irradiated with a high dose and annealed sufficiently can be used as a temperature sensor.     

The magnetic entropy change in the double perovskite La2NiMnO6 with strong spin–phonon coupling

The magnetocaloric effect and the critical behavior of La₂NiMnO₆ are investigated by measurement of the magnetization around $T_C$. The magnetic entropy change $\left|\Delta S\right|$ of La₂NiMnO₆ for a field change of 0–45 kOe near the Curie temperature is about 5% of the theoretical expectation. The critical behavior of the La₂NiMnO₆ deviates from the mean field theory. These abnormal phenomena are understood in the context of the strong spin–phonon coupling in La₂NiMnO₆. It is suggested that a method of modulating this coupling would enhance the magnetic entropy change greatly, which makes the La₂NiMnO₆ a promising candidate for room-temperature magnetic refrigeration.     

基于虚拟现实的动车组维修性验证系统研究与设计

针对动车组维修性验证方法不足的问题,提出了采用虚拟仿真手段对维修性进行验证的方法;结合动车组系统的特点,对基于虚拟现实的动车组维修性验证系统进行了方案设计,给出了维修性验证具体流程,研究了三维虚拟样机建模的基本方法;虚拟维修性验证系统有效提高了动车组维修性设计效率,缩短了研制周期,是一种实现动车组维修性并行优化设计的有效方法。