Bosonic helium clusters doped by alkali metal cations: interaction forces and analysis of their most stable structures

Ab initio potentials are computed for alkali metal cationic partners interacting with ⁴He and an overall many-body potential is constructed for each of the ionic dopants in helium clusters. The structures are then obtained via a genetic algorithm approach and results compared with Basin-Hopping Monte Carlo simulations. The classical arrangements are analyzed and quantum effects discussed in comparison with what has been found with Diffusion Monte Carlo calculations. Further corrections to the classical picture by including three-body forces and radial delocalization of the helium adatoms are also considered and their effects analyzed. This work is dedicated to the late Nando Bernardi, an eclectic and gifted scientist and a dear friend whose early departure has left a sad void in our community.     

Synthesis, characterization and properties of naphthoxazine-functional poly(propyleneoxide)s

Thermally curable naphthoxazine-functionalized polymers were synthesized by the reaction of linear (diamines) and branched (triamines) poly(propyleneoxide)s (Jeffamine series) having various molecular weights, with p-formaldehyde, and 2-naphthol. The structures of the resulting polymers were characterized by using FT-IR and ¹H-NMR. In addition, curing behavior of these polymers was studied using differential scanning calorimeter (DSC). Hydrophilicity of these polymers, both in cured and non-cured states, was investigated by water contact angle measurements. The surface topographies of the polymers were also examined by atomic force microscope (AFM).     

An experimental and computational approach to pH‐dependent self‐aggregation of poly(2‐isopropyl‐2‐oxazoline)

Besides temperature, self‐aggregation of poly(2‐isopropyl‐2‐oxazoline) (PIPOX) can also be triggered via pH in aqueous solution (25 °C, pH > 5). Lowest energy structures and interaction energies of PIPOX with H₃O⁺, OH^?, and H₂O were calculated by DFT methods showed that, in addition to their ability to protonate PIPOX, H₃O⁺ ions had strong interaction with both water and PIPOX in acidic conditions. H₃O⁺ ions acted as compatibilizer between PIPOX and water and increased the solubility of PIPOX. OH^? ions were found to have stronger interaction with water compared to PIPOX resulting in desorption of water molecules from PIPOX phase and decreased solubility, leading to enhanced hydrophobic interactions among isopropyl groups of PIPOX and formation of aggregates at high pH. Results concerning the effect of end‐groups on aggregate size were in good agreement with statistical mechanics calculations. Moreover, the effect of polymer concentration on the aggregate size was examined. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 210–221     

Surface vibrational thermodynamics from ab initio calculations for fcc(1 0 0)

We present vibrational dynamics and thermodynamics for the (1 0 0) surfaces of Cu, Ag, Pd, Pt and Au using a real space approach. The force field for these systems is described by density functional theory. The changes in the vibrational dynamics and thermodynamics from those in bulk are confined mostly to the first-layer. A substantial enhancement of the low-frequency end of the acoustic branch was found and is related to a loosening of the bond at the surface. The thermodynamics of the first-layer also show significant differences (higher heat capacity, lower free energy and higher mean vibrational square amplitudes) from what obtains in bulk. Comparing these results with those calculated using embedded-atom method potentials, we discovered that for Ag(1 0 0) and Cu(1 0 0), the two methods yield very similar results while for Pd(1 0 0), Pt(1 0 0) and Au(1 0 0) there are substantial differences.     

Antioxidant activity of two wild edible mushrooms (Morchella vulgaris and Morchella esculanta) from North Turkey

The ethanol extracts of Morchella vulgaris (EEMV) and Morchella esculanta (EEME) were analysed for their antioxidant activities in different systems including reducing power, free radical scavenging, superoxide anion radical scavenging, total antioxidant activity, and metal chelating activity. EEMV and EEME had similar reducing power, free radical scavenging, superoxide anion radical scavenging, hydrogen peroxide scavenging, and metal chelating activity at concentrations of 50, 100, and 150 microg/mL. These various antioxidant activities were compared to standard antioxidants such as butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT), and alpha-tocopherol. The percent inhibition of different concentrations of EEMV on peroxidation in the linoleic acid system was 85 and 87 % respectively, which was greater than that of 100 and 250 microg/mL of alpha-tocopherol (50 and 77%, respectively) and similar to 250 microg/mL of BHA (85, 87%, respectively). The percent inhibition of different concentrations of EEME on peroxidation in the linoleic acid system was 80 and 87 % respectively, which was greater than that of 100 and 250 microg/mL of alpha-tocopherol (50, 77%) and similar to 250 microg/mL BHA (87%). On the other hand, the percent inhibition of 100 and 250 microg/mL of BHT was 97 and 99%, respectively. In addition, the total phenolic compounds in EEMV and EEME were determined as gallic acid equivalents.     

Tailoring of nanoscale porosity in carbide-derived carbons for hydrogen storage

The poor performance of hydrogen storage materials continues to hinder development of fuel cell-powered automobiles. Nanoscale carbons, in particular (activated carbon, exfoliated graphite, fullerenes, nanotubes, nanofibers, and nanohorns), have not fulfilled their initial promise. Here we show that carbon materials can be rationally designed for H2 storage. Carbide-derived carbons (CDC), a largely unknown class of porous carbons, are produced by high-temperature chlorination of carbides. Metals and metalloids are removed as chlorides, leaving behind a collapsed noncrystalline carbon with up to 80% open pore volume. The detailed nature of the porosity-average size and size distribution, shape, and total specific surface area (SSA)-can be tuned with high sensitivity by selection of precursor carbide (composition, lattice type) and chlorination temperature. The optimum temperature is bounded from below by thermodynamics and kinetics of chlorination reactions and from above by graphitization, which decreases SSA and introduces H2-sorbing surfaces with binding energies too low to be useful. Intuitively, pores of different size and shape should not contribute equally to hydrogen storage. By correlating pore properties with 77 K H2 isotherms from a wide variety of CDCs, we experimentally confirm that gravimetric hydrogen storage capacity normalized to total pore volume is optimized in materials with primarily micropores ( approximately 1 nm) rather than mesopores. Thus, in agreement with theoretical predictions, a narrow size distribution of small pores is desirable for storing hydrogen, while large pores merely degrade the volumetric storage capacity.     

Comparison of the radiopharmaceutical potentials of dithizone radiolabeled with 131I and with 99mTc

In this study, dithizone (diphenylthiocarbazone) has been separately radiolabeled with ¹³¹I and with ^99mTc for preliminarily testing their radiopharmaceutical potentials on male albino rabbits. ¹³¹I-dithizone and ^99mTc-dithizone were intravenously injected to rabbits via their ear veins after anesthetizing with a mixture of Alfazyne and Alfamine (Serva) to determine their dynamic and static statuses in the metabolism. Also, ^99mTc as pertechnetate and ¹³¹I as iodate were administered to rabbits as controls. Dynamic and static scintigrams were obtained using a gamma camera (Diacan Instruments). Dynamic scintigrams were obtained over the first half hour with frames of 1 minute following the administrations of the labeled compounds. Static images were obtained from posterior projection at different time intervals up to about 3 hours following the administration of the radiolabeled compounds. ^99mTc-dithizone was significantly uptaken by the pancreas in contrast to free ^99mTc. In the case of ¹³¹I-dithizone, the distribution of ¹³¹I activity in the metabolism was clearly different than the case of free ¹³¹I and the uptake of ¹³¹I-dithizone at the pancreas zone was also significant. These preliminary tests have clearly indicated that especially ^99mTc-dithizone has a significant potential to be used as a pancreatic radiopharmaceutical.     

Arylthio analogs of 5,8-quinolinedione: Synthesis,characterization, antibacterial,and antifungal evaluations

Abstract

A set of bis(arylthio) substituted 5,8-quinolinedione derivatives were synthesized and investigated for their in vitro antimicrobial effect. The antibacterial and antifungal activities of 6,7-bis(arylthio)-5,8-quinolinedione (4a–f) and 6,7-bis(arylthio)-2-methyl-5,8-quinolinedione (5a–f) were evaluated against four gram-negative bacteria, three gram-positive bacteria, and three fungi strains. The bis(methoxyarylthio) 5,8-quinolinedione analogs presented better activity against especially gram-positive bacteria compared to bis(halogenarylthio) 5,8-quinolinedione analogs. Bis(3-methoxyarylthio) 5,8-quinolinedione (4e) had the same activity of the reference drug against Staphylococcus aureus. Bis(2-methoxyarylthio) 5,8-quinolinedione (4f) showed two-and-a half-fold better activity with 89.69?μM against Enterococcus faecalis, and two-fold better activity with 11.20?μM against Staphylococcus epidermidis. Bis(2-methoxyarylthio)-2-methyl-5,8-quinolinedione 5f exhibited five-fold higher antibacterial activity with 43.44?μM against E. faecalis and also eight-fold activity of the reference drug with 2.71?μM against S. epidermidis.     

Optical absorption of a quantum well with an adjustable asymmetry

The effects of asymmetry and the electric field on the electronic subbands and the nonlinear intersubband optical absorption of GaAs quantum wells represented by a P?schl-Teller confining potential are studied. The potential itself can be made asymmetric through a correct choice of its parameter set and this adjustable asymmetry is important for optimizing the absorption. In that way optimal cases can be created. We calculate the modified wave functions and electronic subbands variationally. The linear and the nonlinear optical intersubband absorption coefficients are calculated. Numerical results for a typical GaAs quantum well are presented. The nonlinear part of the absorption coefficient is strongly modified by the asymmetry parameters while the electric field affects it at smaller values of the parameters. - 78.67.De Quantum wells