Structure refinement of sub-cubic-mm volume sample at high pressures by pulsed neutron powder diffraction: application to brucite in an opposed anvil cell

Neutron powder diffraction measurements of 0.9 mm³ of mixture of deuterated brucite and pressure medium were conducted at pressures to 2.8 GPa, using an opposed anvil cell and a medium-resolution diffractometer at Japan Proton Accelerator Research Complex pulsed neutron source. Spurious-free diffraction patterns were successfully obtained and refined to provide all structural parameters including Debye–Waller factors. Tilting of hydroxyl dipoles of brucite toward one of the three nearest-neighbor oxygen anions was confirmed to be substantial at pressure as low as 1.5 GPa. By this application, technical feasibility to analyze such a small sample has been newly established, which would be useful to extend the applications of neutron diffraction at high pressures.     

One-dimensional migration of interstitial clusters in SUS316L and its model alloys at elevated temperatures

For self-interstitial atom (SIA) clusters in various concentrated alloys, one-dimensional (1D) migration is induced by electron irradiation around 300 K. But at elevated temperatures, the 1D migration frequency decreases to less than one-tenth of that around 300 K in iron-based bcc alloys. In this study, we examined mechanisms of 1D migration at elevated temperatures using in situ observation of SUS316L and its model alloys with high-voltage electron microscopy. First, for elevated temperatures, we examined the effects of annealing and short-term electron irradiation of SIA clusters on their subsequent 1D migration. In annealed SUS316L, 1D migration was suppressed and then recovered by prolonged irradiation at 300 K. In high-purity model alloy Fe-18Cr-13Ni, annealing or irradiation had no effect. Addition of carbon or oxygen to the model alloy suppressed 1D migration after annealing. Manganese and silicon did not suppress 1D migration after annealing but after short-term electron irradiation. The suppression was attributable to the pinning of SIA clusters by segregated solute elements, and the recovery was to the dissolution of the segregation by interatomic mixing under electron irradiation. Next, we examined 1D migration of SIA clusters in SUS316L under continuous electron irradiation at elevated temperatures. The 1D migration frequency at 673 K was proportional to the irradiation intensity. It was as high as half of that at 300 K. We proposed that 1D migration is controlled by the competition of two effects: induction of 1D migration by interatomic mixing and suppression by solute segregation.     

Preparation and properties of a fullerene/polysiloxane hybrid from chemically modified fullerene and polymethoxysiloxane

An organic–inorganic hybrid was prepared by simply mixing a fullerene derivative with polymethoxysiloxane. First, C₆₀ was subjected to a radical addition reaction with 4,4′-azobis(4-cyanovaleric acid) to provide a C₆₀ derivative. Polymethoxysiloxane was prepared by a controlled hydrolytic condensation of tetramethoxysilane. These two compounds were mixed and heated to provide hybrid bulk body. The hybrid bulk body showed high mechanical strength and elastic modulus compared with polymethoxysiloxane or the C₆₀/polymethoxysiloxane hybrid. The formation of a dense siloxane network was established by a homogeneous mixing of the C₆₀ derivative with polymethoxysiloxane.     

Studies on the syntheses of polymetalloxanes and their properties as a precursor for amorphous oxide. IV. Properties of SiO2–TiO2 oxide fibers from polytitanosiloxane

From polytitanosiloxanes (PTS), SiO₂–TiO₂ oxide fibers with fairly good tensile strength were prepared, and their mechanical and thermal properties were investigated. The precursor fibers PTS-0.5 and PTS-1.0 were obtained by dry spinning of a highly viscous PTS solution which were formed as the reaction mixture of silicic acid (SA) with bis(2,4-pentanedionato)titanium diisopropoxide (PTP) in the molar ratios (SA/PTP) of 0.5 and 1.0. The precursor fibers PTS-0.5 were too brittle to measure their tensile strength, whereas PTS-1.0 and the heat-treated fibers were found to have tensile strength of 130 (precursor), 540 (500°C), and 450 (900°C) MPa, respectively. Heat-treatment of the fibers PTS-1.0 at above 1000°C forms anatase and rutile of titanium dioxide. The crystallization is resulted from the unreacted PTP which is not incorporated into the polymer network.     

Loop corrections to the heterotic string effective lagrangian

We derive string-loop corrections (torus topology) to the quartic curvature term in the low-energy effective lagrangian for the heterotic string theory. The one-loop correction is found to give the relative weight of two tensor structures different from the tree level.     

A novel liquid plasma AOP device integrating microwaves and ultrasounds and its evaluation in defluorinating perfluorooctanoic acid in aqueous media

A simplified and energy-saving integrated device consisting of a microwave applicator and an ultrasonic homogenizer has been fabricated to generate liquid plasma in a medium possessing high dielectric factors, for example water. The microwave waveguide and the ultrasonic transducer were interconnected through a tungsten/titanium alloy stick acting both as the microwave antenna and as the horn of the ultrasonic homogenizer. Both microwaves and ultrasonic waves are simultaneously transmitted to the aqueous media through the tungsten tip of the antenna. The microwave discharge liquid plasma was easily generated in solution during ultrasonic cavitation. The simple device was evaluated by carrying out the degradation of the perfluorooctanoic acid (PFOA), a system highly recalcitrant to degradation by conventional advanced oxidation processes (AOPs). PFOA is 59% degraded in an aqueous medium after only 90 s of irradiation by the plasma. Intermediates were identified by electrospray mass spectral techniques in the negative ion mode.     

The Effect of Viscosity on the Diffusion and Termination Reaction of Organic Radical Pairs

The effect of viscosity on the diffusion efficiency (F_dif) of an organic radical pair in a solvent cage and the termination mechanism, that is, the selectivity of disproportionation (Disp) and combination (Comb) of the geminated caged radical pair and the diffused radicals encountered, were investigated quantitatively by following the photolysis of dimethyl 2,2′-azobis(2-methylpropionate) (V-601) in the absence and presence of PhSD. F_dif and Disp/Comb selectivity outside the cage [Disp_(dif)/Comb_(dif)] are highly sensitive to the viscosity. In contrast, the Disp/Comb selectivity inside the cage [Disp_(cage)/Comb_(cage)] is rather insensitive. The difference in viscosity dependence between Disp_(cage)/Comb_(cage) and Disp_(dif)/Comb_(dif) is explained by the spin state of the radical pair inside and outside the cage and the spin state dependent configurational changes of the radical pair upon their collision. Given that the configurational change of the radicals associates the displacement and reorganization of solvents around the radicals, the termination outside the cage, which requires larger change than that inside the cage, is highly viscosity dependent. Furthermore, while the bulk viscosity of each solvent shows good correlation with F_dif and Disp/Comb selectivity, microviscosity is the better parameter predicting F_dif and Disp_(dif)/Comb_(dif) selectivity regardless of the solvents.     

Circular autocorrelation of stationary circular Markov processes

The stationary Markov process is considered and its circular autocorrelation function is investigated. More specifically, the transition density of the stationary Markov circular process is defined by two circular distributions, and we elucidate the structure of the circular autocorrelation when one of these distributions is uniform and the other is arbitrary. The asymptotic properties of the natural estimator of the circular autocorrelation function are derived. Furthermore, we consider the bivariate process of trigonometric functions and provide the explicit form of its spectral density matrix. The validity of the model was assessed by applying it to a series of wind direction data.     

Paterno-Buchi photocyclization of 2-siloxyfurans and carbonyl compounds. Notable substituent and carbonyl (Aldehyde vs ketone and singlet- vs triplet-excited state) effects on the regioselectivity (Double-bond selection) in the formation of bicyclic exo-oxetanes

Paterno-Buchi coupling, photochemical [2 + 2] cycloaddition, of carbonyl compounds 2a-f with 2-siloxyfurans 1a-d has been investigated in detail. The stereoselective formations of exo-oxetanes 3 and 4 were observed in high yields. The regioselectivity (double-bond selection, 3 vs 4) was found to be largely dependent upon the carbonyls, the substituents at the furan ring, and the excited state of the carbonyls (singlet vs triplet). The photoreaction of aldehydes 2a-c gave bicyclic exo-oxetanes 3 and 4 at regio-random, independent upon their excited states and the substituents at furan ring. However, the photoreaction of the triplet state of ketones 2d-f was found to give regioselectively exo-oxetanes 4, except for the 4-methyl-2-siloxyfurane 1d case. The singlet-excited state of acetone 2f gave both oxetanes 3 and 4 at regio-random. For the singlet-state photochemistry, the approach direction of the electrophilic oxygen of the excited carbonyls to the furan ring is proposed to be an important factor for the exo-stereoselection. The Griesbeck model can rationalize the regio- and exo-selective formation of oxetanes in the triplet-state photoreaction.     

Syntheses of linear ethoxysiloxanes by the oxidative condensation of triethoxysilane

Linear ethoxysiloxanes were synthesized by the oxidative condensation of hydrosilane. Triethoxysilane was subjected to oxidation to form triethoxysilanol, and pentaethoxydisiloxane was formed by the condensation reaction of triethoxysilane with triethoxysilanol. Pentaethoxydisiloxane was also subjected to oxidative condensation to form a mixture of nona- and decaethoxytetrasiloxanes. In contrast, pentaethoxydisiloxane, heptaethoxytrisiloxane, and nonaethoxytetrasiloxanes were subjected to the reaction with ethanol in the presence of zinc to isolate hexaethoxydisiloxane, octaethoxytrisiloxane, and decaethoxytetrasiloxane, respectively.