Direct determination of selenium in urine samples by electrothermal atomic absorption spectrometry using a Zr plus Rh-treated graphite tube and co-injection of Rh as chemical modifier

Different chemical modifiers for use with electrothermal atomic absorption spectrometry (ET AAS) were investigated in relation to determining the selenium in human urine samples. The samples were diluted in a solution containing 1% v/v HNO₃ and 0.02% m/v cetyltrimethylammonium chloride (CTAC). Studying the modifiers showed that the use of either Ru or Ir as the permanent modifier gave low sensitivity to Se and the peak shape was very noisy, while Zr or Rh gave no peak at all. The same occurred when Zr was used in solution. For mixtures of permanent modifiers, Ir plus Rh or Zr plus Rh gave very low sensitivity, Zr plus Rh with co-injection of Ir in solution was also not efficient, Zr plus Rh in solution gave good sensitivity, but the best results were obtained with a mixture of Zr and Rh as the permanent modifier and co-injection of Rh in solution. Using this last modifier, the following dilutions with the HNO₃ and CTAC were studied: 1:1, 1:2, 1:3 and 1:4. The best dilution was 1:1, which promoted good sensitivity and a more defined peak shape and made it possible to correct for the background using a deuterium arc lamp. Under these conditions, a characteristic mass of 26±0.2 pg was obtained for Se in aqueous solution. Six certified urine samples were analyzed using matrix matching calibration and the measured concentrations were in agreement with the certified values, according to a t-test at the 95% confidence level. Recovery tests were carried out and the recoveries were in the range 100–103%, with relative standard deviation better than 9%. The limit of detection (LOD, 3 sd, n=10) was 3.0 μg L⁻¹ in the sample. The treated graphite tube could be used for at least 600 atomization cycles without significant alteration of the analytical signal.     

Analysis of sorption and bioavailability of different species of mercury on model soil components using XAS techniques and sensor bacteria

The present work studies the adsorption behaviour of mercury species on different soil components (montmorillonite, kaolinite and humic acid) spiked with CH₃HgCl and CH₃HgOH at different pH values, by using XAS techniques and bacterial mercury sensors in order to evaluate the availability of methyl mercury on soil components. The study details and discusses different aspects of the adsorption process, including sample preparation (with analysis of adsorbed methyl mercury by ICP-OES), the various adsorption conditions, and the characterization of spiked samples by XAS techniques performed at two synchrotron facilities (ESRF in Grenoble, France and HASYLAB in Hamburg, Germany), as well as bioavailability studies using mercury-specific sensor bacteria. Results show that XAS is a valuable qualitative technique that can be used to identify the bonding character of the Hg in mercury environment. The amount of methyl in mercury adsorbed to montmorillonite was pH-dependent while for all soil components studied, the bond character was not affected by pH. On the other hand, clays exhibited more ionic bonding character than humic acids did with methyl mercury. This interaction has a higher covalent character and so it is more stable for CH₃HgOH than for CH₃HgCl, due to the higher reactivity of the hydroxyl group arising from the possible formation of hydrogen bonds.The bioavailability of methyl mercury adsorbed to montmorillonite, kaolinite and humic acids was measured using recombinant luminescent sensor bacterium Escherichia coli MC1061 (pmerBR_BSluc). In case of contact exposure (suspension assays), the results showed that the bioavailability was higher than it was for exposure to particle-free extracts prepared from these suspensions. The highest bioavailability of methyl mercury was found in suspensions of montmorillonite (about 50% of the total amount), while the bioavailabilities of kaolinite and humic acids were five times lower (about 10%). The behaviour of methyl mercury in the presence of montmorillonite could be explained by the more ionic bonding character of this system, in contrast to the more covalent bonding character observed for humic acids. Thus, XAS techniques seem to provide promising tools for investigating the mechanisms behind the observed bioavailabilities of metals in various environmental matrices, an important topic in environmental toxicology.     

PNPP Hydrolysis Catalyzed by Manganese(III) Complexes with Crowned Salicylaldimine Schiff Base Ligand

Four manganese(III) complexes (MnL¹Cl, MnL²Cl, MnL⁴₂Cl, MnL⁵₂Cl) with a crowned salicylaldimine Schiff base ligand have been synthesized and employed as models to mimic hydrolase in the hydrolysis of p-nitrophenyl picolinate (PNPP). The kinetics and mechanism of catalytic PNPP hydrolysis have been investigated. The kinetic mathematical model of PNPP cleavage catalyzed by these complexes has been proposed. The effects of the ligand structure and crown ether ring in complexes, and the reactive temperature on the rate of catalytic PNPP hydrolysis have been also examined. The results show that compared with the crown-free analogous MnL³Cl and MnL⁶₂Cl, the crowned Schiff base manganese(III) complexes, MnL¹Cl, MnL²Cl, MnL⁴₂Cl and MnL⁵₂Cl, exhibit more high catalytic activity, which follow the order: MnL¹Cl >MnL²Cl >MnL⁴₂Cl >MnL⁵₂Cl >MnL³Cl >MnL⁶₂Cl; the pseudo-first-order-rate (k_obs) for the PNPP hydrolysis catalyzed by the complex MnL¹Cl containing three crown ether rings is highest among six complexes and is 1.81 times that of MnL³Cl, 1.49 × 10³ times that of spontaneous hydrolysis of PNPP, respectively, at pH = 7.00, [S] = 2.0 × 10⁻⁴ mol dm⁻³.     

An automated method for the analysis of stable isotope labeling data in proteomics

An algorithm is presented for the generation of a reliable peptide component peak table from liquid chromatography-mass spectrometry (LC-MS) and subsequent quantitative analysis of stable isotope coded peptide samples. The method uses chemical noise filtering, charge state fitting, and deisotoping toward improved analysis of complex peptide samples. Overlapping peptide signals in mass spectra were deconvoluted by correlation with modeled peptide isotopic peak profiles. Isotopic peak profiles for peptides were generated in silico from a protein database producing reference model distributions. Doublets of heavy and light labeled peak clusters were identified and compared to provide differential quantification of pairs of stable isotope coded peptides. Algorithms were evaluated using peptides from digests of a single protein and a seven-protein mixture that had been differentially coded with stable isotope labeling agents and mixed in known ratios. The experimental results correlated well with known mixing ratios.     

Model prediction of batch emulsion copolymerization as a function of conversion: A sensitivity analysis

Recently a model has been developed capable of predicting absolute monomer concentrations and their ratios in the polymer, aqueous, and monomer droplet phases as a function of conversion in batch emulsion copolymerizations without using any adjustable parameters. In this article the sensitivity of model predictions of composition drift toward deviations of 10% in all model parameters (maximum swellabilities of monomer in the polymer phase, water solubilities, reactivity ratios, and monomer and polymer densities) was estimated using the monomer combination methyl methacrylate-styrene as an example. From the sensitivity analysis it can be concluded that the reactivity ratios are the most important parameters affecting composition drift. The effects of deviations in maximum swellabilities and monomer and polymer densities on composition drift can be neglected, while the water solubility is important only in those cases where the amount of monomer in the aqueous phase cannot be neglected as compared with the total monomer amount. © 1994 John Wiley & Sons, Inc.     

Equilibrium studies of mercury(II) complexes with penicillamine

A solid-phase microextraction method coupled with a flame photometric detector was developed for the analysis of organophosphorus pesticides in water. Two kinds of fiber (100 mum polydimethyl siloxane (PDMS) and 85 mum polyacrylate (PA) fibers) were used and compared. Parameters that may affect the extraction, such as the duration of absorption and desorption, temperature of absorption, ionic strength, elutropic strength, and concentration of humic acid were investigated. Higher sensitivity and lower detection limits were achieved using a PA fiber than using a PDMS fiber. The detection limit is less than 0.3 mug l(-1) for most of the analytes, except for mevinphos (420 mug l(-1)). The precision is better than 9%.     

Influence of nanoporous carbon electrode thickness on the electrochemical characteristics of a nanoporous carbon|tetraethylammonium tetrafluoroborate in acetonitrile solution interface

Electrochemical characteristics for the nanoporous carbon|Et₄NBF₄+acetonitrile interface have been studied by cyclic voltammetry and impedance spectroscopy methods. The influence of the electrolyte concentration and thickness of the nanoporous electrode material on the shape of the cyclic voltammetry and impedance curves has been established and the reasons for these phenomena are discussed. A value of zero charge potential, depending slightly on the structure and concentration of the electrolyte, the region of ideal polarizability and other characteristics have been established. The nanoporous nature of the carbon electrodes introduces a distribution of resistive and capacitive elements, giving rise to complicated electrochemical behaviour. Analysis of the complex plane plots shows that the nanoporous carbon|Et₄NBF₄+acetonitrile electrolyte interface can be simulated by an equivalent circuit, in which two parallel conduction paths in the solid and liquid phases are interconnected by the double-layer capacitance in parallel with the complex admittance of the hindered reaction of the charge transfer or of the partial charge transfer (i.e. adsorption stage limited) process. The values of the characteristic frequency depend on the electrolyte concentration and electrode potential, i.e. on the nature of the ions adsorbed at the surface of the nanoporous carbon electrode. The value of the solid state phase resistance established is independent of the thickness of the electrode material.     

Dynamic electrochemical impedance spectroscopy measurements of passive layer cracking under static tensile stresses

Electrochemical impedance spectroscopy allows the examination of corrosion susceptibility and resistance for different construction materials, in particular the determination of the properties of their passive films. This technique makes possible the analysis of electrochemical processes in time domain, including rapid phenomena such as changes in the properties of passive films, but it has never been used for passive layer cracking examination. In many cases, fracture of the passive film under tensile stresses leads to stress corrosion cracking. Therefore, investigations of passive layer cracking on austenitic stainless steels under tensile stresses facilitate the understanding of the mechanism of stress corrosion cracking in these common engineering materials. The effect of static tensile stresses on the passive film cracking behaviour of type 304L stainless steel immersed in 0.5 M NaCl solution at room temperature has been investigated. This paper presents the impedance spectra obtained for 304L stainless steel samples at different potential values.Contribution to the 3rd Baltic Conference on Electrochemistry, Gdansk-Sobieszewo, Poland, 23–26 April 2003Dedicated to the memory of Harry B. Mark, Jr. (28 February 1934–3 March 2003)     

A study of the chemiluminescence behavior of myoglobin with luminol and its analytical applications

A chemiluminescence signal at 425 nm was observed when ferric state myoglobin was mixed with luminol in alkaline medium. Because the signal was remarkably enhanced in the presence of Fe(CN)₆ ^4–, analytical applications were investigated in a flow-injection system. The increase in chemiluminescence was linearly dependent on myoglobin concentration in the range 0.1 to 100 nmol L^–1, and the limit of detection was 0.04 nmol L^–1 with relative standard deviation 3.2% (3). It was also found that binding of Mb with the ligands CN^–, SCN^–, and F^– significantly inhibited the chemiluminescence reaction. The linear dynamic ranges for the ligands were 1.0–300.0, 0.1–3.0, and 0.5–100.0 nmol L^–1, and the limits of detection (S/N=3) 0.4, 0.04, and 0.2 nmol L^–1, for F^–, CN^–, and SCN^–, respectively. The relative standard deviations were 5.32%, 6.13%, and 3.38% for 0.1 nmol L^–1 CN^–, 0.5 nmol L^–1 SCN^–, and 1.0 nmol L^–1 F^–, respectively. At a flow rate of 2.0 mL min^–1 the assay could be accomplished in 1 min, including sampling and washing. The method has been successfully applied to the determination of myoglobin in human urine and F^– in water samples. A possible mechanism of chemiluminescence production by myoglobin and luminol is presented.