Metal-containing monomers. Part 1. Spatial and electronic structures of cobalt(II) and nickel(II) complexes with acrylamide and of their polymers

Summary The spatial and electronic structures of the complexes [Co(AAm)₄(H₂O)₂](NO₃)₂ (1), Co(AAm)₄Cl₂ (2), [Ni(AAm)₄(H₂O)₂](NO₃)₂ (3) and Ni(AAm)₄Cl₂ (4), where AAm is acrylamide, and the products of their radical, frontal and post-grafting polymerization have been studied by electronic spectroscopy. The complexes (1), (3) and (4) were found to have pseudooctahedral structures in both the solid and solution phases. A change in the spatial structure of complex (2) was established in going from the crystal (tetragonally distorted octahedral) to solution (tetrahedral). The coordination environment of the metal centre does not change markedly during polymerization of the metal-containing monomers.     

Critical factors for high-performance physically adsorbed (dynamic) polymeric wall coatings for capillary electrophoresis of DNA

Physically adsorbed (dynamic) polymeric wall coatings for microchannel electrophoresis have distinct advantages over covalently linked coatings. In order to determine the critical factors that control the formation of dynamic wall coatings, we have created a set of model polymers and copolymers based on N,N-dimethylacrylamide (DMA) and N,N-diethylacrylamide (DEA), and studied their adsorption behavior from aqueous solution as well as their performance for microchannel electrophoresis of DNA. This study is revealing in terms of the polymer properties that help create an "ideal" wall coating. Our measurements indicate that the chemical nature of the coating polymer strongly impacts its electroosmotic flow (EOF) suppression capabilities. Additionally, we find that a critical polymer chain length is required for polymers of this type to perform effectively as microchannel wall coatings. The effective mobilities of double-stranded (dsDNA) fragments within dynamically coated capillaries were determined in order to correlate polymer hydrophobicity with separation performance. Even for dsDNA, which is not expected to be a strongly adsorbing analyte, wall coating hydrophobicity has a deleterious influence on separation performance.     

Synthesis, structure, and X-band (9.5 GHz) EPR characterization of the new series of pH-sensitive spin probes: N,N-disubstituted 4-amino-2,2,5,5-tetramethyl-3-imidazoline 1-oxyls

[reaction: see text] An approach to the synthesis of new imidazoline nitroxides bearing an N',N'-disubstituted amidine group is reported. The approach is based on the alkylation of diamagnetic 4-R-amino-1,2,2,5,5-pentamethyl-3-imidazolines with bromoacetic acid ethyl ester; the products of alkylation are further oxidized to the corresponding nitroxides. The approach allows a variety of functional groups to be introduced into the nitroxide molecule structure. Alkylation with bromoacetic acid ethyl ester was found to proceed with high regioselectivity and afford the products of exo-alkylation. The regiochemical assignment is made on the basis of 13C NMR spectra and confirmed by X-ray diffraction study. All of the nitroxides synthesized here were shown to have pH-dependent EPR spectra with pKa ranging from 3.5 to 6.2. For nitroxides 13 bearing the carboxylic group remote to the nitroxide moiety, the changes in isotropic magnetic parameters of EPR spectra due to reversible deprotonation of the carboxylic group were found to be small. For these nitroxides, we demonstrate an alternative approach for pKa determination that is based on measuring the peak-to-peak line width of the EPR spectrum in the presence of the paramagnetic broadening agent potassium ferricyanide. The partition coefficients of nitroxides in octanol/H2O and octanol/phosphate buffer solution mixtures were measured to reveal a range of their lipophilicities.     

Basis set convergence studies of Hartree-Fock calculations of molecular properties within the resolution of the identity approximation

Within the resolution of the identity (RI) method, the convergence of the Hartree-Fock (HF) total molecular energy and the multipole moments in the course of the combined regular expansion of the molecular and auxiliary (RI) basis sets is studied. Dunning's cc-pVXZ series is used for both the molecular and the RI basis sets. The results show the calculated quantities converge to the HF limit when both the molecular and the RI basis sets are expanded from correlation-consistent polarized valence double zeta to correlation-consistent polarized valence sextuple zeta. Combinations of molecular/RI basis sets sufficient for convergence of the total energy and of the multipole moments at various accuracy levels have been determined. A measure of the RI basis set incompleteness is suggested and discussed. As it is significantly faster than the standard HF algorithm for small and midsize molecules, the RI-HF method, together with appropriate expanding series of both molecular and RI basis sets, provide an efficient tool to estimate and control the error of the Hartree-Fock calculations due to the finite basis set.     

Effect of molecular weight on synthesis and surface morphology of high-density poly(ethylene glycol) grafted layers

This work describes studying the permanent grafting of carboxylic acid end-functionalized poly(ethylene glycol) methyl ether (PEG) chains of different molecular weights from the melt onto a surface employing poly(glycidyl methacrylate) ultrathin film as an anchoring layer. The grafting led to the synthesis of the complete PEG brushes possessing exceptionally high grafting density. The maximum thickness of the attached PEG films was strongly dependent on the length of the polymer chains being grafted. The maximum grafting efficiency was close to the critical entanglement molecular weight region for PEG. All grafted PEG layers were in the "brush regime", since the distance between grafting sites for the layers was lower than the end-to-end distance for the anchored macromolecules. Scanning probe microscopy revealed that the grafting process led to complete PEG layers with surface smoothness on a nanometric scale. Practically all samples were partly or fully covered with crystalline domains that disappeared when samples were scanned under water. Due to the PEG hydrophilic nature, the surface with the grafted layer exhibited a low (up to 21 degrees ) water contact angle.     

Synthesis and Conformational Analysis of 1′‐ and 3′‐Substituted 2‐Deoxy‐2‐fluoro‐D‐ribofuranosyl Nucleosides

Convergent syntheses of the 9‐(3‐X‐2,3‐dideoxy‐2‐fluoro‐β‐D ‐ribofuranosyl)adenines 5 (X=N₃) and 7 (X=NH₂), as well as of their respective α‐anomers 6 and 8 , are described, using methyl 2‐azido‐5‐O‐benzoyl‐2,3‐dideoxy‐2‐fluoro‐β‐D ‐ribofuranoside ( 4 ) as glycosylating agent. Methyl 5‐O‐benzoyl‐2,3‐dideoxy‐2,3‐difluoro‐β‐D ‐ribofuranoside ( 12 ) was prepared starting from two precursors, and coupled with silylated N⁶‐benzoyladenine to afford, after deprotection, 2′,3′‐dideoxy‐2′,3′‐difluoroadenosine ( 13 ). Condensation of 1‐O‐acetyl‐3,5‐di‐O‐benzoyl‐2‐deoxy‐2‐fluoro‐β‐D ‐ribofuranose ( 14 ) with silylated N²‐palmitoylguanine gave, after chromatographic separation and deacylation, the N⁷‐β‐anomer 17 as the main product, along with 2′‐deoxy‐2′‐fluoroguanosine ( 15 ) and its N⁹‐α‐anomer 16 in a ratio of ca. 42 : 24 : 10. An in‐depth conformational analysis of a number of 2,3‐dideoxy‐2‐fluoro‐3‐X‐D ‐ribofuranosides (X=F, N₃, NH₂, H) as well as of purine and pyrimidine 2‐deoxy‐2‐fluoro‐D ‐ribofuranosyl nucleosides was performed using the PSEUROT (version 6.3) software in combination with NMR studies.     

Chloro(η6‐p‐cymene)(phosphoramidite)ruthenium(II), a 16‐Electron Fragment Stabilized by an η2‐Aryl–Metal Interaction,and Its Use in Asymmetric Cyclopropanation

Chloride abstraction from the half‐sandwich complexes [RuCl₂(η⁶‐p‐cymene)(P*‐κP)] ( 2a : P* = (S_a,R,R)‐ 1a = (1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl bis[(1R)‐1‐phenylethyl)]phosphoramidite; 2b : P* = (S_a,R,R)‐ 1b = (1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl bis[(1R)‐(1‐(1‐naphthalen‐1‐yl)ethyl]phosphoramidite) with (Et₃O)[PF₆] or Tl[PF₆] gives the cationic, 18‐electron complexes dichloro(η⁶‐p‐cymene){(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl {(1R)‐1‐[(1,2‐η)‐phenyl]ethyl}[(1R)‐1‐phenylethyl]phosphoramidite‐κP}ruthenium(II) hexafluorophosphate ( 3a ) and [Ru(S)]‐dichloro(η⁶‐p‐cymene){(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl {(1R)‐1‐[(1,2‐η)‐naphthalen‐1‐yl]ethyl}[(1R)‐1‐(naphthalen‐1‐yl)ethyl]phosphoramidite‐κP)ruthenium(II) hexafluorophosphate ( 3b ), which feature the η²‐coordination of one aryl substituent of the phosphoramidite ligand, as indicated by ¹H‐, ¹³C‐, and ³¹P‐NMR spectroscopy and confirmed by an X‐ray study of 3b . Additionally, the dissociation of p‐cymene from 2a and 3a gives dichloro{(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl [(1R)‐(1‐(η⁶‐phenyl)ethyl][(1R)‐1‐phenylethyl]phosphoramidite‐κP)ruthenium(II) ( 4a ) and di‐μ‐chlorobis{(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl [(1R)‐1‐(η⁶‐phenyl)ethyl][(1R)‐1‐phenylethyl]phosphoramidite‐κP}diruthenium(II) bis(hexafluorophosphate) ( 5a ), respectively, in which one phenyl group of the N‐substituents is η⁶‐coordinated to the Ru‐center. Complexes 3a and 3b catalyze the asymmetric cyclopropanation of α‐methylstyrene with ethyl diazoacetate with up to 86 and 87% ee for the cis‐ and the trans‐isomers, respectively.     

On the calculation of multiplicities for representations of SU(n)

For some family of representations of SU(n) the explicit formulae for the multiplicity of a given representation in arbitrary tensor product are derived. The adjoint representation and the representations acting in the symmetrical and antisymmetrical tensors are contained in the considered family as the simplest cases.     

The generalization of SU(3)-mass formulae for arbitrary reductive lie algebras

The analogues of Gell-Mann-Okubo and Coleman-Glashow mass formulae are derived for arbitrary reductive Lie algebras.