Characteristic absolute efficiency response curves of a high purity germanium detector in the energy range 50–1500 keV

The characteristic absolute efficiency response curves of a high purity germanium detector (HPGe) for different counting geometries have been established in the energy range 50–1500 keV by measuring the absolute efficiencies using both mono-energetic and multi-gamma emitting radionuclide point calibrated sources supplied by IAEA. Several fitting functions proposed in the literature were assessed for interpolation within the intermediate energy range of interest. The values of the function parameters have been determined by using the linear least square methods. The problems associated with the measurements of experimental efficiency data at small source–detector distances and the importance of the correlation matrix in the estimation of precise uncertainties have been shown. It was found that the inclusion of correlation matrices in the propagation of error formulae plays a significant role up to 450 keV gamma-ray energy and results in a drastic reduction of errors associated with the predicted efficiencies. The discrepancy at closer counting geometries in the absence of true gamma-gamma coincidence corrections is found to reach to about 30%.     

Structural conformation of biomolecules released from temperature-sensitive composite polymer particles – a study by circular dichroism

A conformational study of the biomolecules released from submicron- and micron-sized temperature-sensitive composite polymer particles by decreasing the temperature from 40 to 25 °C was done with circular dichroism and the results were compared with those of the native biomolecules. In almost all cases the biomolecules released retained their native conformational states. Received: 10 April 2001 Accepted: 13 June 2001     

Reusable Nano-Zirconia-Catalyzed Synthesis of Benzimidazoles and Their Antibacterial and Antifungal Activities

In this article, a zirconia-based nano-catalyst (Nano-ZrO₂), with intermolecular C-N bond formation for the synthesis of various benzimidazole-fused heterocycles in a concise method is reported. The robustness of this reaction is demonstrated by the synthesis of a series of benzimidazole drugs in a one-pot method. All synthesized materials were characterized using ¹HNMR, ¹³CNMR, and LC-MS spectroscopy as well as microanalysis data. Furthermore, the synthesis of nano-ZrO₂ was processed using a standard hydrothermal technique in pure form. The crystal structure of nano-ZrO₂ and phase purity were studied, and the crystallite size was calculated from XRD analysis using the Debye–Scherrer equation. Furthermore, the antimicrobial activity of the synthesized benzimidazole drugs was evaluated in terms of Gram-positive, Gram-negative, and antifungal activity, and the results were satisfactory.     

Fatty amides synthesized from vegetable oil as extractant of molybdenum(VI)

In this study, fatty amides (FAs) synthesized from palm olein were used to extract and separate Mo(VI) from acidic media. Effects of various parameters upon the separation of Mo(VI) from Co(II), Ni(II), Al(III) and Mn(II), including extractant concentration, metal ion concentration, contact time, diluent, and acidity, were investigated. It was found that Mo(VI) was successfully separated from the above commonly associated metal ions by stripping from the loaded organic phase. Different acidic and alkaline solutions were used. Ammonium hydroxide solution was an optimal. Extraction of Mo(VI) into the organic phase involved the formation of 1:3 complexes. This work presents the development of a low-cost and environmentally friendly extractant to recycle and recover molybdenum.     

Non-covalently lactose imprinted polymers and recognition of saccharides in aqueous solutions

The aim of this work was to prepare lactose imprinted polymer and study of its selectivity for the recognition of different mono- and disaccharides. A series of molecularly imprinted polymers (MIPs) against lactose were synthesized and their binding properties were compared with a Blank non-imprinted polymer. Methacrylamide (MAAM) and ethylene glycol dimethacrylate were used as functional monomer and cross-linker, respectively. Dimethylsulfoxide was also applied as polymerization solvent. Different lactose:MAAM ratios were applied and optimized MIP was selected in a conventional batch adsorption study. The dissociation constant and maximum binding sites of polymer were determined using the Scatchard analysis. The selectivity of MIP for different mono- and disaccharides was also evaluated. The results indicated that the shape of cavity and orientation of functional monomers in binding sites and the spatial arrangement of hydroxyl groups in saccharide structure were responsible for the selectivity of lactose imprinted polymer.     

Effect of post-synthetic processing conditions on structural variations and applications of bacterial cellulose

Physicochemical properties of materials can be amended by altering their physical structure through different processing conditions. The present study was conducted to investigate the post-synthesis structural variations and physico-mechanical properties of bacterial cellulose (BC) sheets prepared using different drying methods. Wet BC sheets of the same origin were freeze dried (BC-FD), dried at room temperature (25 °C) (BC-DRT), and dried at elevated temperature (50 °C) (BC-DHT). FE-SEM micrographs revealed that BC-DRT and BC-DHT had a more tightly packed and compact structure than the loosely held fibrils of BC-FD. XRD analysis revealed the relative crystallinity of the BC sample to be 64.60, 59.16, and 47.20 % for BC-DHT, BC-DRT and BC-FD, respectively. The water holding capacity (WHC) of the BC-FD was higher than that of the other two samples. Four consecutive drying and rewetting cycles demonstrated that the WHC of all samples decreased with each cycle. The WHC of BC-DRT and BC-DHT was reduced to almost 0 after the first drying cycle, but the BC-FD samples were able to regain some of their WHC. The tensile strength and elongation modulus were in the order of BC-DHT > BC-DRT > BC-FD. Overall, the results of this study revealed that the post-synthetic processing conditions had a strong effect on the structure and physico-mechanical properties of BC.     

Determination of aminothiols by liquid chromatography with amperometric detection at a silver electrode: Application to white wines

Liquid chromatography coupled to a silver electrode based flow-through amperometric detector (LC-EC-Ag) was developed for the determination of aminothiols in white wines. The C18 reversed phase LC system operated in the isocratic mode at 0.7 mL min⁻¹ and used an acidic mobile phase composed of formic acid, EDTA, sodium nitrate, sodium hydroxide, and methanol 1% (v/v) at pH 4.5. The working electrode operated at 0.08 V vs Ag/AgCl, 3 M KCl and its manual cleaning was realized once a month by smoothing on a polishing cloth. The analyzed aminothiols were resolved and eluted within 4 min, and all standard curves were linear in the range 2 × 10⁻⁷–2 × 10⁻⁵ M. The analyzed wine samples needed no preparation other than dilution with the mobile phase. The concentration of cysteine (CYS), homocysteine (HCYS), glutathione (GSH) and N-acetylcysteine (NAC) in bottled white wines, determined by the method of standard addition, was found to be in the low μM range (0.2–2 mg L⁻¹) depending on the wine type and its age.     

Redox behavior of juglone in buffered aq.: Ethanol media

The present work reports the redox mechanism of 5-hydroxynaphthalene-1,4-dione (HND), commonly known as juglone, in buffered aqueous media having 50% of ethanol. HND followed different mechanistic routes depending upon the pH of the media and more than one pK_a were evaluated from the changes in the slope of the E_p vs. pH plot. The change of pH from acidic to neutral conditions was found to switch the mechanism from CEC to EE mechanism. Pulse techniques were utilized to determine the number of electrons involved in the oxidation and/or the reduction step and to ensure the nature of the redox process. Based upon the obtained results, an electrode reaction mechanism was proposed. Computational studies of HND supported the experimental results. UV-Visible spectroscopy was also employed for the detailed characterization of the compound in a wide range of pH and for the determination of its pK_a.     

The Oxidation of Heterogeneous Tl/Ni/P‐Alloys — Preparation and Crystal Structures of the Thallium Nickel Phosphates TlNi4(PO4)3, Tl4Ni7(PO4)6, and Tl2Ni4(P2O7)(PO4)2

Single crystals of the first anhydrous thallium nickel phosphates were prepared by reaction of heterogeneous Tl/Ni/P alloys with oxygen. TlNi₄(PO₄)₃ (pale‐yellow, orthorhombic, space group Cmc2₁, a = 6.441(2)Å, b = 16.410(4)Å, c = 9.624(2)Å, Z = 4) crystallizes with a structure closely related to that of NaNi₄(PO₄)₃. Tl₄Ni₇(PO₄)₆ (yellow‐brown, monoclinic, space group Cm, a = 10.711(1)Å, b = 14.275(2)Å, c = 6.688(2)Å, β = 103.50(2)°, Z = 8) is isotypic with Na₄Ni₇(PO₄)₆, and Tl₂Ni₄(P₂O₇)(PO₄)₂ (brown, monoclinic, space group C2/c, a = 10.389(2)Å, b = 13.888(16)Å, c = 18.198(3)Å, β = 103.1(2)°, Z = 8) adopts the K₂Ni₄(P₂O₇)(PO₄)₂ structure. Tl₂Ni₄(P₂O₇)(PO₄)₂ could also be prepared in nearly single phase form by reaction of Tl₂CO₃, NiO, and (NH₄)₂HPO₄.