Passively Q-switched S-band thulium fluoride fiberlaser with multi-walled carbon nanotube

A stable, passively Q-switched thulium fluoride fiber laser(TFFL) using a multi-walled carbon nanotube(MWCNT)-based saturable absorber(SA) for operation in the S-band region is proposed and demonstrated.The proposed TFFL has a central lasing wavelength of 1486.4 nm and an input power range of 87.1–126.6 m W.The output pulses have a repetition rate and pulse width range of 30.1–40.0 k Hz and 9.0–3.2 μs, respectively,with a maximum pulse energy of 28.9 n J. This is the first time, to the author's knowledge, of the successful demonstration of a passively Q-switched S-band TFFL using an MWCNT-based SA.     

Entry distribution, fission barrier, and formation mechanism of 254102No

The entry distribution in angular momentum and excitation energy for the formation of 254No has been measured after the 208Pb(48Ca,2n) reaction at 215 and 219 MeV. This nucleus is populated up to spin 22Planck's over 2pi and excitation energy greater, similar6 MeV above the yrast line, with the half-maximum points of the energy distributions at approximately 5 MeV for spins between 12Planck's over 2pi and 22Planck's over 2pi. This suggests that the fission barrier is greater, similar5 MeV and that the shell-correction energy persists to high spin.     

Planar hybrid carbon-decorated zinc oxide nanowires for infrared photodetection

Vapor phase transport (VPT) assisted by thermal evaporation of methanol was utilized to favor the fabrication of hybrid carbon-decorated zinc oxide nanowires (C/ZnO NWs). The photoluminescence (PL) spectrum revealed evidence of optical properties for several defects such as zinc interstitials (Zn_i) and oxygen vacancy (V_o) in hybrid C/ZnO NWs. The PL also exhibited that the planar hybrid C/ZnO NWs photodetector has a wide range of sensitivity from ultraviolet (UV) to infrared (IR). The imaging results show formation of ZnO nanostructures which can be further confirmed from X-ray diffraction (XRD) results. XRD exhibits carbon (C)-related peaks at 12.88, 26, 43, 45, and 55° together with standard ZnO peaks. The incorporation of C shows excellent photoconduction towards varied laser powers (0.0, 7.82, 37.95, 69.20, 100.0, 130.0, and 160.0 mW) of IR illumination. The possibility of current drain in the device was evaluated based on the direct-current (DC) bias voltage of 0.00, 3.33, and 5.55 V. DC bias 3.33 and 5.55 V attributed increase of photocurrent towards the forward bias voltage. However, the reverse bias voltage illustrated a vast increase of photocurrent compared to the forward bias voltage. External quantum efficiency (EQE) at DC bias 5.55 V was 6.5–9.5 range folds greater than the EQE measured for zero bias voltage. Significant photoresponsivity was identical for various laser pulse ranging from 10 to 5000 Hz. Simultaneously, the rise (τ_r) and fall (τ_f) time were measured at 49 and 60.5 μs attributes that the fabrication technique can be improvised and implemented to enhance the efficiency of optoelectronic devices for future applications.     

Dynamical and operational performance of shunt and permanent-magnet DC motors powered by lead–acid batteries for pumping applications

Nonlinear Dynamics - This paper presents some dynamical and operational performance of shunt and permanent-magnet DC motors powered by lead–acid batteries for water pumping applications....     

Novel isocyanide-based three-component one-pot synthesis of cyanophenylamino-acetamide derivatives

A one-pot multicomponent synthesis of a novel class of cyanophenylamino-acetamides through the conversion of primary amides to the corresponding nitriles, starting from simple and readily available inputs including 2-aminobenzamide, an aldehyde, and an isocyanide in the presence of p-toluenesulfonic acid as a catalyst, in excellent yields at room temperature in ethanol as a green reaction medium is described.     

Mercury porosimetry in mesoporous glasses: a comparison of experiments with results from a molecular model

We present results from experiments and molecular modeling of mercury porosimetry into mesoporous Vycor and controlled pore glass (CPG) solid materials. The experimental intrusion/extrusion curves show a transition from a type H2 hysteresis for the Vycor glass to a type H1 hysteresis for the CPG. Mercury entrapment is observed in both materials, but we find that the amount of entrapped mercury depends on the chosen experimental relaxation time. No additional entrapment is found in a second intrusion/extrusion cycle, but hysteresis is still observed. This indicates that hysteresis and entrapment are of different origin. The experimental observations are qualitatively reproduced in theoretical calculations based on lattice models, which provide significant insights of the molecular mechanisms occurring during mercury porosimetry experiments in these porous glasses.