Use of microdevices to determine the diffusion coefficient of electrochemically generated species: application to binary solvent mixtures and micellar solutions

A new approach for the determination of diffusion coefficient, D, of redox species is presented. It is based on the use of a home-constructed twin electrode within a thin-layered cell (TETLC) filled with a solution of electroactive species. Values of D are readily calculated, provided that the time required for the electrochemically generated species (produced at the generator electrode) to reach the collector electrode and the distance between both electrodes are known. Other parameters typically required to calculate D, e.g., concentration of the redox species, area of the electrode, and number of electrons transferred, are not needed. Diffusion coefficients of Fe(CN)(6)(3-), Ru(NH3)(6)(2+), and quinone were determined in water and, for Fe(CN)(6)(4-), in binary mixtures with glycerol. The results obtained were in good agreement with literature values. Aqueous glycerol solutions are microheterogeneous, as shown by the dependence on medium composition of the empirical solvent polarity scale, ET(30), determined by the solvatochromic probe RB. The responses of RB and the electrochemically generated species (Fe(CN)(6)(4-)) to the composition of aqueous glycerol mixtures were found to be remarkably similar. Measurements of D of ferrocene in micellar solutions of the cationic surfactant CTABr were also performed. Values of D for ferrocene and the ferrocenium cation are very different, in agreement with the chemical affinity of both species for the cationic micelle.     

Synthesis and structure of novel copper(II) complexes with pyrazole derived ligands and metal–ligand interaction in solution

Two new ligands of the coumarin type have been synthesized and characterized by ¹H, ¹³C NMR, IR and MS. The crystal and molecular structures of ligand 2, determined by the X-ray diffraction method, are presented. With copper(II) these ligands create solid complexes of the type CuLCl₂, where L is 5-(2-hydroxybenzoyl)-3-methyl-1-(2-pyridinyl)pyrazol-4-carboxylic acid methyl ester (2) or 3-methyl-1-(2-pyridinyl)-1H-chromene[4,3-c]pyrazol-4-on (3). The new copper(II) complexes have been characterized by elemental analysis and solid state FT-IR. The protonation constants of ligands 2 and 3 have been determined in 5% v/v 1,4-dioxane–water solution (25 °C). The coordination modes in the complexes with copper(II) are discussed for 2 on the basis of potentiometric and UV–Vis data.     

Characterization of the covalently bound anionic flavin radical in monoamine oxidase a by electron paramagnetic resonance

It was recently suggested that partially reduced monoamine oxidase (MAO) A contains an equilibrium mixture of an anionic flavin radical and a tyrosyl radical (Rigby, S. E.; et al. J. Biol. Chem. 2005, 280, 4627-4632). These observations formed the basis for a revised radical mechanism for MAO. In contrast, an earlier study of MAO B only found evidence for an anionic flavin radical (DeRose, V. J.; et al. Biochemistry 1996, 35, 11085-11091). To resolve the discrepancy, we have performed continuous-wave electron paramagnetic resonance at 94 GHz (W-band) on the radical form of MAO A. A comparison with d-amino acid oxidase (DAAO) demonstrates that both enzymes only contain anionic flavin radicals. Pulsed electron-nuclear double resonance spectra of the two enzymes recorded at 9 GHz (X-band) reveal distinct hyperfine coupling patterns for the two flavins. Density functional theory calculations show that these differences can be understood in terms of the difference at C8alpha of the isoalloxazine ring. DAAO contains a noncovalently bound flavin whereas MAO A contains a flavin covalently bound to a cysteinyl residue at C8alpha. The similar electronic structures and hydrophobic environments of MAO and DAAO, and the similar structural motifs of their substrates suggest that a direct hydride transfer catalytic mechanism established for DAAO (Umhau, S.; et al. Proc. Natl. Acad. Sci. U.S.A. 2000, 97, 12463-12468) should be considered for MAO.     

Nonradial large solutions of sublinear elliptic problems

Let p be a nonnegative locally bounded function on , N3, and 0<γ<1. Assuming that the oscillation sup_|x|=rp(x)−inf_|x|=rp(x) tends to zero as r→∞ at a specified rate, it is shown that the equation Δu=p(x)u^γ admits a positive solution in satisfying lim_|x|→∞u(x)=∞ if and only if

     

Smiles rearrangements in Ugi- and Passerini-type couplings: new multicomponent access to O- and N-arylamides

The use of Smiles rearrangement in Ugi- and Passerini-type couplings with electron-deficient phenols allows very straightforward multicomponent formation of O-aryl- and N-arylamides. Best yields were observed with the highly activated o- and p-nitrophenols, salicylic derivatives giving adducts in lower yields. The scope of these new reactions is further increased by the successful couplings of heterocyclic phenols such as hydroxypyridines and hydroxypyrimidines.     

A study of primary nucleation of calcium oxalate monohydrate: I‐Effect of supersaturation

There are various organic and inorganic constituents in kidney stones. Among them, calcium oxalate monohydrate (COM) is the primary inorganic constituent of kidney stones. However, the mechanisms of formation of kidney stones are not well understood. In this regard, a basic study is carried out for better understanding of nucleation, crystal growth and/or aggregation of formed COM crystals. The primary nucleation of calcium oxalate monohydrate is studied at the laboratory scale using turbidity measurements. Calcium chloride and potassium oxalate solutions are mixed and then added to a Turbidimeter tube for continuous recording of turbidity. Induction time (time to induce formation of detectable crystals) is estimated from time‐turbidity graphs. The effect of some urinary species, such as oxalate and calcium, on nucleation and crystallization characteristics of COM is determined by particle size distribution analysis, measuring weight of crystals and calculation of relative supersaturation. The classical nucleation theory is applied at high supersaturation ratios (SR) ranging from 1.6 to 2.2. The results indicate that nucleation rate increases with increasing supersaturation ratio from 0.81 × 10²⁸ nuclei/cm³.sec at 1.6 SR, to 18.02 × 10²⁸ nuclei/cm³.sec at 2.2 SR. On the other hand, free energy change and radius of critical nucleus are decreased as supersaturation ratio is increased. The nucleation rates are higher than those reported in literature. Such discrepancy is discussed on the bases of differences in experimental techniques. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of gamma radiation on the absorption spectra and optical energy gap of Li‐ doped ZnO thin films

We have studied the effect of subsequent gamma (γ) irradiation on the absorption spectra and the optical energy gap of ZnO thin films doped with Li (ZnO:Li). The optical transmission (T) and optical reflection (R) in the wavelength range 190∼800 nm of films deposited at 300 °C on sapphire, MgO or quartz substrates were measured. The dependence of the absorption coefficient α on photon energy hν was determined as a function of γ‐doses. The films show direct allowed interband transition that influenced by the gamma doses. Both the optical energy gap E^opt_g and the absorption coefficient (α) were found to be γ‐dose dependent. The results can be discussed on the basis of γ‐irradiation‐induced defects in the film and on the film structure. The absorption coefficient exhibits exponential dependence on photon energy obeying Urbach's rule in the absorption edge. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystallization of calcium sulfate dihydrate at different supersaturation ratios and different free sulfate concentrations

Free Sulfate is a major parameter affecting gypsum crystallization during phosphoric acid production. Gypsum crystal size, shape and filtration rate are significantly affected by the concentration of free sulfate. It is, therefore, important to evaluate the effectiveness of different sulfate levels from 1.5% to 3.5% on induction time and gypsum morphology. The crystallization of gypsum was carried out under simulated conditions of phosphoric acid production by the dihydrate process. Calcium hydrogen phosphate and sulfuric acid were mixed with dilute phosphoric acid at 80 °C, and the turbidity of the reaction mixture was measured at different time periods to calculate the induction time of gypsum crystals formation. With increasing free sulfate concentration, the induction time was significantly decreased. Chemical processing of Central and South Florida phosphate concentrates under different concentrations of free sulfate from 1.5% to 5.5% was carried out. The change on crystal size distribution and filtration rate were traced with free sulfate concentrations. The results show that, filtration rate of phosphogypsum was correlated to the mean diameter of crystals. In addition, induction time and co‐crystallized (lattice) P₂O₅ % in gypsum are decreased with increasing free sulfate content from 1.5% to 3.5%. Morphology of formed gypsum crystals at different sulfate contents and different supersaturation ratios are investigated. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis of 4‐amino‐3‐cyano‐2‐ methylsulfanyl‐1H‐[1,5]benzodiazepine,benzo[1,3]azole,and pyrazolobenzo[1,3]azole derivatives via a new utility of bis(methylsulfanyl)methylene derivatives

Novel polysubstituted 1,5‐benzodiazepine 5 , 2,2‐bis(methylthio)benzoxazoles 8a–d , 2,2‐bis‐ (acetyl)benzoxazole 8e , 2‐(3‐methyl‐1‐phenylpyrazolo‐ 4‐yl)benzoazole derivatives 16a–c , as well as the previously reported 2‐di[cyano(acetyl)‐methylene]benzothiazoles 7a,b have been obtained via a new utility of ketene dithioacetals 1a,b and 12 with aniline derivatives 2 . Rationales for the reactions pathways are presented. © 2004 Wiley Periodicals, Inc. Heteroatom Chem 15:407–412, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.20031