Biomimetic piezoelectric quartz sensor for caffeine based on a molecularly imprinted polymer

A piezoelectric quartz sensor coated with molecularly imprinted polymer (MIP) for caffeine was developed. The MIP was prepared by co-polymerizing methacrylic acid (MAA) and ethylene glycol dimethacrylate (EDMA) in the presence of azobis(isobutyronitrile) as initiator, caffeine as template molecule, and chloroform as solvent. The MIP suspension in polyvinyl chloride/tetrahydrofuran (6:2:1 w/w/v) solution was spin coated onto the surface of the electrode of a 10 MHz AT-cut quartz crystal. The sensor exhibited a linear relationship between the frequency shift and caffeine concentration in the range of 1×10^–7 mg mL^–1 up to 1x10^–3 mg mL^–1 [correlation coefficient (r)=0.9935] in a stopped flow measurement mode. It has a sensitivity of about 24 Hz/ln(concentration, mg mL^–1). A steady-state response was achieved in less than 10 min. The performance characteristic of the sensor shows a promising and inexpensive alternative method of detecting caffeine. Surface studies were carried out for the reagent phase of the sensor using SEM, AFM, and XPS analysis in order to elucidate the imprinting of the caffeine molecule. The SEM micrograph, AFM image, and XPS spectra confirmed the removal of caffeine by Soxhlet extraction in the imprinting process and the rebinding of caffeine to the MIP sensing layer during measurement.     

Measurement of cell migration on surface-bound fibronectin gradients

A novel technique for the quantitative observation of cell migration along linear gradient substrates functionalized with adhesive proteins is presented. Gradients of the cell adhesion molecule fibronectin are generated by the cross diffusion of functionalizable alkanethiols on gold and characterized by X-ray photoelectron spectroscopy and surface plasmon resonance. Two distinct migration assays are described that characterize the movement of either sparsely populated noncontacting cells or a confluent monolayer of cells into free space. The drift speed of bovine aortic endothelial cells is measured and shown to increase along a fibronectin gradient when compared to a uniform control substrate using both assays. The results of these experiments establish reproducible conditions for studies of cell migration on gradients of surface-bound ligands.     

PHOTOINACTIVATION OF CATALASE

Abstract— Inactivation of catalase with visible light (>400nm) has been studied in purified bovine liver catalase and in peroxisomal catalase in the mitochondrial fraction of rat liver. Light corresponding to that of maximal absorbance of the heme site (405 nm) was most effective in inactivation. Although photoinactivation is O₂ dependent, scavengers of OH radical, ¹O₂ and O⁻₂ did not protect against loss of activity in either system. Superoxide dismutase partially protected purified catalase added into the mitochondrial fraction system. However, complete protection of catalase was afforded by low concentrations of substrates such as formic acid or methanol which rapidly convert Compound I to Ferricatalase.     

Microstructure determination of poly-(1,3-pentadiene) by a combination of infrared, 60-MHz NMR, 300-MHz NMR,and X-ray diffraction spectroscopy

A quantitative procedure has been developed for characterizing the complete microstructure of polymers of 1,3-pentadiene, including the tacticity of any crystalline component. This can be accomplished by a combination of infrared spectroscopy, X-ray crystallinity, and 300-MHz NMR spectroscopy. A series of high structural purity polymers were synthesized with a series of previously unreported mixed microstructures. These samples were characterized by using the three techniques mentioned, including the previously unreported 300-MHz NMR data. With those results a 60-MHz NMR/IR method of spectroscopy was developed to determine the composition of poly(1,3-pentadiene)s in terms of percent cis-1,2-, cis-1,4-, trans-1,4-, and 3,4-pentadiene units.     

Hydrodynamic microfabrication via"on the fly" photopolymerization of microscale fibers and tubes

A microfluidic apparatus capable of creating continuous microscale cylindrical polymeric structures has been developed. This system is able to produce microstructures (e.g. fibers, tubes) by employing 3D multiple stream laminar flow and "on the fly"in-situ photopolymerization. The details of the fabrication process and the characterization of the produced microfibers are described. The apparatus is constructed by merging pulled glass pipettes with PDMS molding technology and used to manufacture the fibers and tubes. By controlling the sample and sheath volume flow rates, the dimensions of the microstructures produced can be altered without re-tooling. The fiber properties including elasticity, stimuli responsiveness, and biosensing are characterized. Responsive woven fabric and biosensing fibers are demonstrated. The fabrication process is simple, cost effective and flexible in materials, geometries, and scales.     

Stereoselective synthesis of 4-hydroxy-2-phenylproline framework

Highly diastereoselective (>20:1) bromo-lactonization of N-sulfonyl-2-allyl-2-phenylglycine methyl ester (11) was observed. Successive treatment of the chiral lactone with MeONa gave the desired (2S,4R)-4-hydroxy-2-phenylproline derivative in high yield without erosion of the diastereoselectivity. The starting chiral non-racemic compound (5) was prepared from the racemic 2-phenylglycine using a classical kinetic resolution (crystallization), an asymmetric phase transfer alkylation, and an enzyme-catalyzed kinetic resolution.     

Using pulse shape discrimination to sort individual energy deposition events in a germanium crystal

A fast digital oscilloscope based pulse shape discrimination (PSD) system has been tested with intrinsic germanium detectors large enough to allow ionizing events which generate localized electron-hole pairs at a single site to be segregated from those depositing energy at several different sites in the crystal. Drift velocities of the electrons and holes result in pulses several hundred nanoseconds long. Since the electric field varies by almost a factor of 10 between the outer and inner surfaces, collection of electrons and holes can frequently be dinstinguished, and pulses due to multi-site events can be distinguished from single site events.     

CAROTENE and CYTOCHROME C DEPENDENT SURVIVAL KINETICS IN RESPONSE TO HIGH INTENSITY VISIBLE LIGHT IN THE SMUT FUNGUS Ustilago violacea

Abstract— Exposure of variously pigmented strains of Ustilago violacea to high intensity incandescent radiation resulted in the generation of three types of survival curves. High carotene, low cytochrome c containing strains of U. violacea were generally characterized by linear type I survival curves with slopes approximately equal to zero. Strains which lacked carotenes were characterized by exponential decay type II survival curves. A third survival curve, type III was observed with carotene accumulating strains which also contained large amounts of cytochrome c. The type III curves are characterized by an initial loss of viability, similar to the type II curves, followed by a recovery period, with eventual stability in survival. The survival curve type appears to be dependent on the relative mg quantities of cytochrome c and carotenes in the cells. Strains with carotene/cytochromec ratios of0–1 × 10^-1,3–15× 10^-1 and l6 × 10^-1 and above had type II, type III and type I survival curves, respectively.     

OXYGEN-DEPENDENT PHOTOSENSITIVITY and MITOTIC RECOMBINATION IN THE SMUT FUNGUS Ustilago violacea

Abstract— The effect of high intensity incandescent radiation on survival and mitotic recombination in the phlph + diploid strain of Ustilago violacea was studied with and without atmospheric O₂. In the presence of atmospheric O₂, strain phlph+ was characterized by photokilling to approximately 50% survival, and induction of mitotic recombination to about 60% by 90 min of light exposure. No photokilling and little induction of mitotic recombination were observed when light exposure was carried out in an 0₂ depleted environment. Photokilling and photo-induced mitotic recombination in U. violacea may be due to DNA damage or repair in response to a photosensitized reaction, involving an endogeneous photosensitizer.