Analysis of phantom centering positioning on image noise and radiation dose in axial scan type of brain CT

ABSTRACT

This study examined the dose and image quality according to the position change of a human phantom in a CT scan. This study used an MDCT 128 Slice CT Scanner instrument. An axial scan was performed with a 16 cm CTDI phantom of a human phantom, and the dose was measured using a pencil chamber meter. The phantom was scanned 10 cm above and below the isocenter and 15 cm above the right and left. The position of the phantom is indicated by C-0 in the isocenter position, S-10 in the upper 10 cm, I-10 in the lower 10 cm, R-15 in the right 15 cm, and L-15 in the left 15 cm. The test was performed 30 times using the brain CT protocol to calculate the dose and the dose width product (DWP). The acquired images were analyzed using the ImageJ program. Statistical analysis was performed using SPSS with one-way ANOVA (p < .05). The mean DWP values of the CT scanner were C-0 31.97 mGy·cm, S-10 24.52 mGy·cm, I-10 24.28 mGy· cm, R-15 17.95 mGy·cm, and L15 17.6 mGy·cm. Compared to the isocenter (C-0), the DLP values measured at each site were 23.3% for S-10, 24% for I-10, 43.8% for R-15, and 44.9% for L15. A significant difference in the one-way ANOVA statistical process was observed (p>0.05). C-0 was measured to be 7.42 HU, S-10 7.87 HU, I-10 8.4 HU, R-15 117 HU, and L-15 13.6 HU for evaluating the image quality. Compared to C-0, S-10 was 5.39%, I-10 was 13.2%, R-15 was 57.6%, and L-15 was 83.2%. The PSNR for S-10, I-10, R-15, and L-15 was 17.37, 17.5, 16.62, and 16.37 dB, respectively. A good quality image can be obtained by positioning the subject precisely in the isocenter in the axial scan, if possible, because the irradiated dose to the subject is low, which can lead to an increase in noise in image reconstruction.     

Preparation and characterization of self-assembled nanoparticles based on glycol chitosan bearing adriamycin

An anthracycline drug, adriamycin, was chemically conjugated onto the backbone of glycol chitosan via an acid-labile cis-aconityl linkage. The physicochemical characteristics of the glycol chitosan–adriamycin (GC–ADR) conjugates were investigated by dynamic light scattering, atomic force microscopy, and fluorescence spectroscopy. The GC–ADR conjugates were capable of forming nano-sized self-aggregates in an aqueous medium, when the adriamycin content in the conjugate was in the range of 2.0–5.0 wt.%. The self-aggregates were spherical in shape, and had mean diameters of 238–304 nm, depending on the adriamycin content. The critical aggregation concentrations of the conjugates, estimated by the fluorescence quenching method, were as low as 1.0–2.5×10⁻² mg/ml. The size of self-aggregates was not affected by the polymer concentration in the range from 50 to 2,000 μg/ml, and was maintained up to 8 days in phosphate-buffered saline (pH 7.4), indicating high colloidal stability. The release of adriamycin from self-aggregates was significantly dependent on the pH of the medium due to the cis-aconityl linkage; e.g., the amount of adriamycin released for 4 days was 7.3±0.3% at pH 7, whereas it was 29.3±1.9% at pH 4. The cell viability results demonstrated that free adriamycin shows more potent cytotoxicity than the conjugates, primarily attributed to the sustained release of adriamycin from self-aggregates. In conclusion, the self-aggregates, formed by GC–ADR conjugates, might be useful for the site-specific delivery of adriamycin in a sustained manner.     

Rational Design and Synthesis of HSF1-PROTACs for Anticancer Drug Development

PROTACs employ the proteosome-mediated proteolysis via E3 ligase and recruit the natural protein degradation machinery to selectively degrade the cancerous proteins. Herein, we have designed and synthesized heterobifunctional small molecules that consist of different linkers tethering KRIBB11, a HSF1 inhibitor, with pomalidomide, a commonly used E3 ligase ligand for anticancer drug development.     

Atomic structure of the Si(5 5 12)-2 × 1 surface

Based on the results of scanning tunneling microscopy studies of the reconstructed Si(5 5 12)-2 × 1 surface, its atomic structure has been found. It turns out that Si(5 5 12)-2 × 1 consists of four one-dimensional structures: honeycomb (H) chain, π-bonded H′ (π) chain, dimer-adatom (D/A) row, and tetramer (T) row. Its period is composed of three subunits, i.e., (i) (3 3 7) unit with a D/A row [D(3 3 7)], (ii) (3 3 7) unit with a T row [T(3 3 7)], and (iii) (2 2 5) unit with both a D/A and a T row. Two kinds of adjacent subunits, T(3 3 7)/D(3 3 7) and D(3 3 7)/(2 2 5), are divided by H chains with 2× periodicity due to buckling, while one kind of adjacent subunits, T(3 3 7)/(2 2 5), is divided by a π chain with 1× periodicity. Two chain structures, H and π chains, commute with each other depending upon the external stresses perpendicular to the chain, which is the same for two row structures, D/A and T rows. It can be concluded that the wide and planar reconstruction of Si(5 5 12)-2 × 1 is originates from the stress balance among two commutable chains and two commutable rows.     

Development of a miniature double-pass cylindrical mirror electron energy analyzer (DPCMA), and its application to Auger photoelectron coincidence spectroscopy (APECS)

We have developed a miniature double-pass cylindrical mirror electron energy analyzer (DPCMA) with an outer diameter of 26 mm. The DPCMA consists of a shield for the electric field, inner and outer cylinders, two pinholes with a diameter of 2.0 mm, and an electron multiplier. By assembling the DPCMA in a coaxially symmetric mirror electron energy analyzer (ASMA) coaxially and confocally we developed an analyzer for Auger photoelectron coincidence spectroscopy (APECS). The performance was estimated by measuring the Si-LVV-Auger Si-1s-photoelectron coincidence spectra of clean Si(1 1 1). The electron-energy resolution of the DPCMA was estimated to be E/ΔE = 20. This value is better than that of the miniature single-pass CMA (E/ΔE = 12) that was used in the previous APECS analyzer.     

Transflective liquid-crystal display using low-twisted vertically aligned mode

We present the design of a transflective and low-power LCD using a low-twist vertically aligned liquid crystal (LC) cell, achieved by blending a chiral additive with a patterned reflector in a single-domain configuration. Unlike the conventional single-domain transflective LCD, in which it is possible to optimize only one of the transmissive and reflective regions, the device suggests that it is possible to optimize both the transmission and reflection design to obtain favorable results in both reflective and transmissive light conditions by optimizing the chiral pitch and twist angle. From the parameter space diagram (PSD) method, which does not include the information on chiral pitch and the nonuniform LC director tilt angle, optimization focused on the transmissive region is performed. By analyzing the relation between the transmittance and the chiral pitch under the applied voltage, the optimized twist angle and chiral pitch are proposed. It is described that the optimized twist angle is also available for the reflective region by the dynamic PSD method by considering the average tilt angle under applied voltage.     

Investigating magnetorheological properties of a mixture of two types of carbonyl iron powders suspended in an ionic liquid

In this work, properties of a magnetorheological (MR) fluid, prepared by dispersing a mixture of two types of carbonyl iron powders (CIPs) of different sizes, in an ionic liquid (N,N-diethyl-N-methyl-N-(2-methoxyethyl) ammonium tetrafluoroborate) that is stable from 9 °C to ca. 300 °C, have been investigated. At first, the random packing density of the mixture was computed as function of mixing ratio of CIP, in order to find out the tendency of the variation. Next, several mixtures, all having the same weight, were prepared at various mixing ratios and dispersed in the ionic liquid, in order to experimentally find the most suitable mixing ratio of CIP. Then, the magnetic clusters of the synthesized MR fluids were observed by using a digital microscope equipped with two permanent magnets, whereas the MR properties were investigated by using a rotation viscometer equipped with a solenoid coil. The experimental results pointed out that the MR fluid with 60 wt% fraction of large particles exhibited the highest MR response.     

A micrometer head integrated microfluidic device for facile droplet size control and automatic measurement of a droplet size

A novel microfluidic droplet generator is proposed, which can control the droplet size through turning an integrated micrometer head with ease, and the size of the produced micro-droplet can be automatically and real-time monitored by an open-sourced software and off-the-shelf hardware.     

Study of alkyl chain length dependent characteristics of imidazolium based ionic liquids [CnMIM]+[TFSA]− by Brillouin and dielectric loss spectroscopy

This study examined the acoustic phonon mode of ionic liquids consisting of 1-alkyl-3-methyl-imidazolium family (C_nMIM) cations with n values ranging from 2 to 10 and bis(trifluoromethylsulfonyl)amide (TFSA) anion in the temperature range from 300 K to 100 K. [C_nMIM]⁺[TFSA]^? showed depolarized (VH) components of Brillouin peaks at temperatures below the glass transition temperature when n is larger than 4. On the other hand, in the case of ionic liquids with different anions, such as [C₄MIM]⁺[BF₄]^?, [C₄MIM]⁺[PF₆]^? and [C₈MIM]⁺[BF₄]^?, the VH component of Brillouin peaks was not observed in the temperature range investigated. The dielectric loss spectra showed that the temperature dependence of alkyl chain domain relaxation of all ionic liquids followed the Arrhenius law and showed an increase in activation energy at the temperature where the VH component of Brillouin peak appeared. These results suggest that the observed depolarized component of Brillouin peak might originate from uniquely induced polarization in the 2nd domain composed of head groups of cations and anions.