Liquid Chromatographic Resolution of Racemic α-Hydroxycarboxylic Acids on Ligand Exchange Chiral Stationary Phases

Two ligand exchange chiral stationary phases (CSPs) based on (S)-leucinol derivative, sodium N-((S)-1-hydroxymethyl-3-methylbutyl)-N-undecylaminoacetate, and (R)-phenylglycinol derivative, sodium N-((R)-2-hydroxy-1-phenylethyl)-N-undecylaminoacetate, covalently bonded to silica gel have been successfully applied in the resolution of nine -hydroxycarboxylic acids. The latter was more effective than the former, the separation factors () being 1.05 to 2.12 while the resolution factors (R_S) varying from 0.18 to 5.29 on the latter. The chromatographic resolution behaviors were dependent on the type and the content of organic modifier and the content of CuSO₄ in aqueous mobile phase and the column temperature. A possible chiral recognition mechanism was also proposed based on the chromatographic resolution behaviors.     

CFD evaluation of drop retraction methods for the measurement of interfacial tension of surfactant-laden drops

Drop retraction methods are popular means of measuring the interfacial tension between immiscible polymers. Experiments show that two different drop retraction methods, imbedded fiber retraction (IFR) and deformed drop retraction (DDR), give inconsistent results when a surfactant is present on the surface of the drop. These inconsistencies are deemed to be due to dilution of the surfactant and due to gradients in interfacial concentration of surfactant along the drop surface. This physical picture is quantified for the simple case of a Newtonian drop in a Newtonian matrix, with an insoluble, nondiffusive surfactant at the interface. The drop is deformed in computational fluid dynamics simulations by shearing the matrix, and then allowed to retract. Dilution and interfacial tension gradients effects are found to be especially large at the early stages of retraction, making IFR unsuitable for measuring the interfacial tension of surfactant-laden interfaces. The effects of surfactant dilution and gradients are found to persist even at late stages of retraction, causing the DDR method to underestimate the equilibrium interfacial tension significantly. The largest underestimates occur when the drop viscosity is lower than the matrix viscosity.     

Metabolic fingerprinting of Ephedra species using 1H-NMR spectroscopy and principal component analysis

The metabolomic analysis of Ephedra species was performed using 1H-NMR spectroscopy and multivariate data analysis. A broad range of metabolites could be detected by 1H-NMR spectroscopy without any chromatographic separation. The principal component analysis used to reduce the huge data set obtained from the 1H-NMR spectra of the plant extracts clearly discriminated three different Ephedra species. The major differences in Ephedra sinica, Ephedra intermedia and Ephedra distachya var. distachya were found to be due to benzoic acid analogues in the aqueous fraction and ephedrine-type alkaloids in the organic fraction. Based on this metabolomic recognition, one of nine commercial Ephedra materials evaluated was shown to be a mixture of Ephedra species. This method will be a useful tool for chemotaxonomic analysis and authentification of Ephedra species including quality control of plant materials.     

Metabolism of eupatilin in rats using liquid chromatography/electrospray mass spectrometry

Eupatilin (5,7-dihydroxy-3',4',6-trimethoxy flavone) is an active ingredient of an ethanol extract of Artemisia asiatica (DA-9601) that is used in the treatment of gastritis. In vitro and in vivo metabolism of eupatilin in the rats has been studied by LC-electrospray mass spectrometry. Rat liver microsomal incubation of eupatilin in the presence of NADPH and UDPGA resulted in the formation of four metabolites (M1-M4). M1, M2, M3 and M4 were tentatively identified as 3'- or 4'-O-demethyl-eupatilin glucuronide, eupatilin glucuronide, 6-O-demethyleupatilin and 3'- or 4'-O-demethyl-eupatilin, respectively. Those metabolites from in vitro study were also characterized in bile, plasma or urine samples after an intravenous administration of eupatilin to rats. In rat bile, plasma and urine samples, eupatilin glucuronide (M2) was a major metabolite, whereas M3, M4 and M4 glucuronide (M1) were the minor metabolites.     

New Acetylcholinesterase‐Inhibitory Pregnane Glycosides of Cynanchum atratum Roots

Three new pregnane glycosides, cynatroside A ( 1 ), cynatroside B ( 2 ), and cynatroside C ( 3 ), isolated from the roots of Cynanchum atratum (Asclepiadaceae), were characterized as 7β‐{[O‐α‐L ‐cymaropyranosyl‐(1→4)‐O‐β‐D ‐digitoxopyranosyl‐(1→4)‐β‐D ‐oleandropyranosyl]oxy}‐3,4,4a,4b,5,6,7,8,10,10a‐decahydro‐6α‐hydroxy‐4b‐ methyl‐2‐(2‐methyl‐3‐furyl)phenanthren‐1(2H)‐one ( 1 ), 7β‐{[O‐β‐D ‐cymaropyranosyl‐(1→4)‐O‐α‐L ‐diginopyranosyl‐(1→4)‐β‐D ‐cymaropyranosyl]oxy}‐3,4,4a,4b,5,6,7,8,10,10a‐decahydro‐2,6α‐dihydroxy‐4b‐methyl‐2‐(2‐methyl‐3‐furyl)phenanthren‐1(2H)‐one ( 2 ), and 7β‐{[O‐α‐L ‐cymaropyranosyl‐(1→4)‐O‐β‐D ‐digitoxopyranosyl‐(1→4)‐β‐L ‐cymaropyranosyl]oxy}‐3,4,4a,4b,5,6,7,8,10,10a‐decahydro‐2,6α‐dihydroxy‐4b‐methyl‐2‐(2‐methyl‐3‐furyl)phenanthren‐1(2H)‐one ( 3 ), respectively. In addition, ten known constituents were identified, i.e., cynascyroside D ( 4 ), glaucoside C ( 5 ), glaucoside D ( 6 ), atratoside A ( 7 ), 2,4‐dihydroxyacetophenone ( 8 ), 4‐hydroxyacetophenone ( 9 ), syringic acid ( 10 ), azelaic acid ( 11 ), suberic acid ( 12 ), and succinic acid ( 13 ). Among these compounds, 1 – 4 significantly inhibit acetylcholinesterase activity.     

Aqueous synthesis of alkanethiolate-protected Ag nanoparticles using Bunte salts

The one-pot synthesis of monolayer-protected metal nanoparticles derived from sodium S-dodecylthiosulfate (Bunte salt) in aqueous solution is described. Silver nanoparticles, which were produced by the borohydride reduction of silver nitrate in H2O, were stabilized by the adsorption of S-dodecylthiosulfate followed by the removal of the SO3- moiety. Temporary stabilization of silver sols by the adsorption of borohydride and borate prevented aggregation of silver nanoparticles in H2O. The syntheses of other metal nanoparticles, including gold, copper, and palladium particles in H2O, were less successful. Gold and copper particles were completely aggregated and precipitated out immediately after the addition of NaBH4, yielding only insoluble clusters. Stable and soluble palladium nanoparticle could be prepared, but the presence of Pd-thiolate complex was also observed. These nanoparticles were characterized using 1H NMR, UV-vis spectroscopy, FT-IR spectroscopy, and transmission electron microscopy.     

Preparation of nanoporous MgO-coated TiO2 nanoparticles and their application to the electrode of dye-sensitized solar cells

Sol-gel-derived Mg(OH)(2) gel was coated onto TiO(2) nanoparticles, and the subsequent thermal topotactic decomposition of the gel formed a highly nanoporous MgO crystalline coating. The specific surface area of the electrode that was prepared from the core-shell-structured TiO(2) nanoparticles significantly increased compared with that of the uncoated TiO(2) electrode. The increase in the specific surface area of the MgO-coated TiO(2) electrode was attributed to the highly nanoporous MgO coating layer that resulted from the topotactic reaction. Dye adsorption behavior and solar cell performance were significantly enhanced by employing the MgO-coated TiO(2) electrode. Optimized coating of a MgO layer on TiO(2) nanoparticles enhanced the energy conversion efficiency as much as 45% compared to that of the uncoated TiO(2) electrode. This indicates that controlling the extrinsic parameters such as the specific surface area is very important to improve the energy conversion efficiency of TiO(2)-based solar cells.     

A polymer-based microfluidic device for immunosensing biochips

This paper describes the design, fabrication, and test of a PDMS/PMMA-laminated microfluidic device for an immunosensing biochip. A poly(dimethyl siloxane)(PDMS) top substrate molded by polymer casting and a poly(methyl methacrylate)(PMMA) bottom substrate fabricated by hot embossing are bonded with pressure and hermetically sealed. Two inlet ports and an air vent are opened through the PDMS top substrate, while gold electrodes for electrochemical biosensing are patterned onto the PMMA bottom substrate. The analyte sample is loaded from the sample inlet port to the detection chamber by capillary force, without any external intervening forces. For this and to control the time duration of sample fluid in each compartment of the device, including the inlet port, diffusion barrier, reaction chamber, flow-delay neck, and detection chamber, the fluid conduit has been designed with various geometries of channel width, depth, and shape. Especially, the fluid path has been designed so that the sample flow naturally stops after filling the detection chamber to allow sufficient time for biochemical reaction and subsequent washing steps. As model immunosensing tests for the microfluidic device, functionalizations of ferritin and biotin to the sensing surfaces on gold electrodes and their biospecific interactions with antiferritin antiserum and streptavidin have been investigated. An electrochemical detection method for immunosensing by biocatalyzed precipitation has been developed and applied for signal registration. With the biochip, the whole immunosensing processes could be completed within 30 min.     

A new synthesis of 1,2,3,5‐tetrahydroimidazo[2,3‐b]‐[1,3]benzodiazocines

A new synthesis of 6‐carbomethoxy‐1,2,3,5‐tetrahydroirnidazo[2,3‐b][1,3]benzodiazocines 13 by the intramolecular cycloaddition reaction of methyl 2‐(1‐aziridinylmethyl)‐3‐(2‐ureidophenyl)propenoates 10 under Appel's dehydration conditions is described. The latter were readily obtained from 2‐nitrobenzalde‐hyde with methyl acrylate through the Baylis‐Hillman reaction.     

Resveratrol derivatives potently induce apoptosis in human promyelocytic leukemia cells

Resveratrol has been shown to possess antioxidant and anticancer activities, but little is known on the effect of resveratrol derivatives. Recently we have isolated resveratrol and its dimers and trimers from peony (Paeonia lactiflora) seeds, and reported their strong antioxidant and cytotoxic activity. In the present study, we have evaluated cellular effects of resveratrol derivatives; viniferin, gnetin H, and suffruticosol B on the proliferation and apoptosis in HL-60 cells in vitro. All resveratrol and its derivatives reduced viability of HL-60 cells in a dose-dependent manner with their IC(50) values of 20-90 microM. Ascending orders of IC(50) values were suffruticosol B, gnetin H, viniferin and resveratrol respectively. HL-60 cells treated with the four stilbenes exhibited the distinct morphological changes characteristics of cell apoptosis such as chromatin condensation, apoptotic bodies, and DNA fragmentations. A time-dependent histogram of the cellular DNA analyzed by flow cytometry revealed a rapid increase in subdiploid cells and a concomitant decrease in diploid cells exposed to 100 microM resveratrol for 0-24 h. Cells treated with 25 microM of resveratrol, viniferin, gnetin H, and suffruticosol B for 24 h resulted in increment of sub-G1 population by 51, 5, 11 and 59%, respectively. Treatment of cells with 0-20 microM resveratrol for 5 h produced a concentration-dependent decrease in cytochrome P450 (CYP) 1B1 mRNA levels. Suffruticosol B also suppressed CYP1B1 gene expression. These results demonstrated that resveratrol oligomers also strongly suppressed HL-60 cell proliferation, and induced DNA damage. In addition, CYP1B1 gene supression may suggest an involvement in the resveratrol-induced apoptosis in HL-60 cells.