Measurement of small-signal and large-signal responses of packaged laser modules at high temperature

In this paper, the pulsed injection method is extended to measure the chip temperature of various packaged laser modules, such as the DFB laser modules, the FP laser modules, and the EML laser modules. An optimal injection condition is obtained by investigating the dependence of the lasing wavelength on the width and period of the injection pulse in a relatively wide temperature range. The small-signal frequency responses and large-signal performances of packaged laser modules at different chip temperature are measured. The adiabatic small-signal modulation characteristics of packaged LD are first extracted. In the large-signal measurement, the effects of chip temperature, bias current and driving signal on the performances of the laser modules are discussed. It has been found that the large-signal performances of the EML modules depend on the different red-shift speeds of the DFB and EAM sections as chip temperature varying, and the optimal characteristics may be achieved at higher temperature.     

Local chemical distribution and electronic structure of Ge1−xTx DMS single crystals (T=Cr,Mn, Fe)

The spatial concentration distribution and local electronic structure of ferromagnetic Ge_1−xT_x (T=Cr, Mn, Fe) DMS single crystals have been investigated by using scanning photoelectron microscopy (SPEM), X-ray absorption spectroscopy (XAS), and photoemission spectroscopy (PES). It is found that doped T ions in Ge_1−xT_x crystals are chemically phase-separated, suggesting that the observed ferromagnetism arises from the phase-separated T-rich phases in Ge_1−xT_x.     

Thermal properties of poly(styrene) containing brominated aryl phosphate additives

General purpose poly(styrene) is a large volume commodity polymer widely used in a range of applications. For many of these the presence of an additive to impart some flammability resistance is required. Most commonly, brominated aromatics are used for this purpose. As the polymer undergoes combustion these compounds decompose to generate bromine atoms and/or hydrogen bromide which escape to the gas phase and trap flame propagating radicals. While these species are effective in inhibiting flame propagation they present the opportunity for loss of halogen to the atmosphere. For this reason, the use of these compounds is being limited in some parts of the world. Phosphorus compounds, on the other had, impart a flame retarding influence by promoting char formation at the surface of the burning polymer. This prevents heat feedback to the polymer and consequent pyrolysis to generate fuel fragments. The combination of both bromine and phosphorus present in a single compound might generate a superior flame-retarding additive in that both modes of retardancy might be promoted simultaneously. Should this be the case smaller amounts of additive might be necessary to achieve a satisfactory level of flame retardancy. A series of such additives, brominated aryl phosphates, has been synthesized and fully characterized spectroscopically. Blends of these additives, at various levels, with poly(styrene) have been examined by DSC, TG and in the UL-94 flame test. The flammability of the polymer is dramatically diminished by the presence of the additive.     

Preparation and Characterization of a Cobalt‐Containing Mono‐Phosphine Ligand and its Coordinated Molybdenum Complex

A cobalt‐containing monodentate phosphine [(μ₂‐PPh₂CH₂PPh₂‐κ²P)Co₂(CO)₄][μ₂‐η²‐PhC≡CP(i‐Pr)₂] 2f , was prepared from the reaction of (μ₂‐PPh₂CH₂PPh₂‐κ²P)Co₂(CO)₆ 1 with PhC≡CP(i‐Pr)₂. It was accompanied by an oxidized compound, [(μ₂‐PPh₂CH₂PPh₂‐κ²P)Co₂(CO)₄][μ₂‐η²‐PhC≡CP(=O)(i‐Pr₂)] 2fo during the chromatographic process. Further reaction of 2f with Mo(CO)₆ resulted in the formation of a 2f ‐ligated molybdenum complex 4 , [(μ₂‐PPh₂CH₂PPh₂‐κ²P)Co₂(CO)₄][μ₂‐η²‐PhC≡CP(i‐Pr₂)‐κP]‐Mo(CO)₅.     

对流扩散方程带罚函数项的有限体积格式及其分析

1引言 有限体积方法[l]一l’]作为守恒型的离散技术，被广泛应用于工程计算领域.文【2，3} 基于分片常数和分片常向量函数空间，对二维驻定对流扩散方程提出了一类非协调混合 有限体积(Covolume)格式，证明了格式具有。(hl/2)收敛精度.但该格式要求对偶剖分 比较规则，即采用重     

短路过渡电弧焊电流信号的近似熵分析

依据近似熵的理论和算法，从非线性角度对纯CO₂保护气体条件下短路过渡电弧焊的电流信号进行了近似熵分析.通过对不同的送丝速度、给定电压及气体流量下电流信号的近似熵计算和比较，表明近似熵可以作为短路过渡稳定性的评判标准.近似熵越大，波动越小，焊接过程就越稳定. 关键词： 非线性 近似熵 短路过渡 稳定性     

Structural and electrical characterization of PZT on gold for micromachined piezoelectric membranes

Piezoelectric membranes have been fabricated that incorporate a gold bottom electrode with an adhesion layer of titanium–tungsten (10:90 wt. %). For solution-deposited acetic acid based lead zirconate titanate (HoAc-PZT) with a Zr:Ti ratio of 40:60, the film’s average piezoelectric coefficient, e₃₁, is -5.31 C/m², with a dielectric constant of 814 at 200 Hz, which is similar to values for platinum bottom electrodes. The PZT structure remains columnar on both types of bottom electrodes. Initial fabrication attempts resulted in cracking that initiated in the PZT layer of the structure. X-ray photoelectron spectroscopy was utilized to establish how processing affects diffusion throughout the composite membrane structure. Crack-free membranes were fabricated and tested. This paper discusses the performance properties and piezoelectric fatigue results for these membranes. PACS 77.84.-s; 77.84.Lf     

Investigation of the Doughnut Effect in Cy3-Labeled Protein Microarrays using Scanning Near-Field Optical Microscope

We demonstrate the fluorescence mapping of protein microarrays by the technique of scanning near-field optical microscopy (SNOM) and confocal microscopy. Micron sized spots (300 μm) of human Immunoglobulin G (hIgG) protein with and without a Cy3 dye labeling have been fabricated on glass substrates by an immobilization method which makes use of calixcrown derivatives termed Prolinker. We have also tried to probe into the well-known “doughnut effect” observed in fluorescence images of proteins using the SNOM technique. The topographic and fluorescence SNOM images revealed that the number of proteins at the boundary of the spot were more than at the center in the case of the microarray spot which showed brighter luminescence at the edge than at the center in the confocal image.     

等离子体中电磁波的粒子模拟

本文介绍了1 2/2维相对论性、电磁模等离子体粒子模拟的方法和原理。系统地以计算机模拟了由电子气体组成的等离子体中的各种电磁波。在无外加静磁场、加外横磁场、加外纵向磁场等不同情况下,分别得到静电波、电磁波、寻常波、非寻常波、ω=nω_c的磁回旋共振、左旋波、右旋波等。其色散关系、截止频率、共振频率、极限相速度均与理论结果一致。