Electroluminescent (EL) properties of Ir(III) complex, [(2,4-diphenylquinoli-ne)]2Iridium picolinic acid N-oxide [(DPQ)2Ir(pic-N-O)] were investigated using PEDOT:PSS and reduced graphene oxide (rGO) as a hole transport layer for solution processable phosphorescent organic light-emitting diodes (PhOLEDs). High performance solution-processable PhOLED with PEDOT:PSS and (DPQ)2Ir(pic-N-O) (8 wt%) doped CBP:TPD:PBD (8:56:12) host emission layer were fabricated to give a high luminance efficiency (LE) of 26.9 cd/A, equivelent to an external quantum efficiency (EQE) of 14.2%. The corresponding PhOLED with rGO as a hole transport layer exhibited the maximum brightness and LE of 13540 cd/m2 and 16.8 cd/A, respectively. The utilization of the solution processable rGO thin films as the hole transport layer offered the great potential to the fabrication of solution processable PhOLEDs. 相似文献
In the present study, carbon-coated lithium iron phosphate (LiFePO4/C) is prepared directly by a polyol-assisted pyro-synthesis performed under reaction times of a few seconds in open-air conditions. The polyol solvent, tetraethylene glycol (TTEG), acts as a low-cost fuel to facilitate combustion and the released exothermic energy promotes the nucleation and growth processes of the olivine nanoparticles. In addition, phosphoric acid (used as the phosphorous source) acts as a catalyst to accelerate polyol carbonization. The structure analysis of the as-prepared LiFePO4/C using X-ray, neutron diffraction and 7Li NMR studies suggested the efficacy of the rapid technique to produce highly crystalline phase-pure olivine nanocrystals. The electron microscopy and particle-size distribution studies revealed that the average particle diameters lie below 100 nm and confirmed the presence of a surface carbon layer of 2–3 nm thickness. The thermal and elemental studies indicated that the carbon content in the sample was approximately 5 %. The prepared LiFePO4/C cathode delivered capacities of 162 mA h g-1 at 0.1 °C rates with impressive capacity retention for extended cycling. The polyol-assisted pyro-synthesis, which evades the use of external energy sources, is not only a straightforward, simple and timely approach but also offers opportunities for large-scale LiFePO4/C production. 相似文献
As a photocathode for CO2 reduction, zinc‐blende zinc telluride (ZnTe) was directly formed on a Zn/ZnO nanowire substrate by a simple dissolution–recrystallization mechanism without any surfactant. With the most negative conduction‐band edge among p‐type semiconductors, this new photocatalyst showed efficient and stable CO formation in photoelectrochemical CO2 reduction at ?0.2–?0.7 V versus RHE without a sacrificial reagent. 相似文献
To establish the structure–catalytic property relationships of heterogeneous catalysts, a detailed characterization of the three‐dimensional (3D) distribution of active sites on a single catalyst is essential. Single‐particle catalysis of a modular multilayer catalytic platform that consists of a solid silica core, a mesoporous silica shell, and uniformly distributed Pt nanoparticles sandwiched in between these layers is presented. The first 3D high‐resolution super‐localization imaging of single fluorescent molecules produced at active sites on the core‐shell model nanocatalysts is demonstrated. The 3D mapping is aided by the well‐defined geometry and a correlation study in scanning electron microscopy and total internal reflection fluorescence and scattering microscopy. This approach can be generalized to study other nano‐ and mesoscale structures. 相似文献
The composites comprising vertically aligned network of copper nanowires (CuNWs) in the presence of cellulose nanofibers were fabricated by using the freeze‐templating method and the effect of aspect ratio (A/R) of CuNWs on the thermal conductivity of epoxy composites was investigated. The thermal conductivity of epoxy composites increased to 0.79 W m?1 K?1 at 1.12 vol% of high A/R CuNWs loading, corresponding to the thermal conductivity enhancement of 365% as compared to the pure epoxy. The thermal conductivity of vertically aligned higher A/R CuNWs/epoxy, which is 38.5% and 51.9% higher than those of the lower A/R CuNWs and the randomly aligned CuNWs, respectively. The application of the epoxy composites in heat dissipation was demonstrated by the temperature changes of composites on a hot plate with the increase of heating time. These results indicate that the thermally conductive composites in this study could be applied for thermal dissipating materials in electronic devices. 相似文献
Chiral optical metamaterials with delicate structures are in high demand in various fields because of their strong light–matter interactions. Recently, a scalable strategy for the synthesis of chiral plasmonic nanoparticles (NPs) using amino acids and peptides has been reported. Reported herein, 3D chiral gold NPs were synthesized using dipeptide γ‐Glu‐Cys and Cys‐Gly and analyzed crystallographically. The γ‐Glu‐Cys‐directed NPs present a cube‐like outline with a protruding chiral wing. In comparison, the NPs synthesized with Cys‐Gly exhibited a rhombic dodecahedron‐like outline with curved edges and elliptical cavities on each face. Morphology analysis of intermediates indicated that γ‐Glu‐Cys generated an intermediate concave hexoctahedron morphology, while Cys‐Gly formed a concave rhombic dodecahedron. NPs synthesized with Cys‐Gly are named 432 helicoid V because of their unique morphology and growth pathway. 相似文献
Herein, we report the development of an 18F‐labeled, activity‐based small‐molecule probe targeting the cancer‐associated serine hydrolase NCEH1. We undertook a focused medicinal chemistry campaign to simultaneously preserve potent and specific NCEH1 labeling in live cells and animals, while permitting facile 18F radionuclide incorporation required for PET imaging. The resulting molecule, [18F]JW199, labels active NCEH1 in live cells at nanomolar concentrations and greater than 1000‐fold selectivity relative to other serine hydrolases. [18F]JW199 displays rapid, NCEH1‐dependent accumulation in mouse tissues. Finally, we demonstrate that [18F]JW199 labels aggressive cancer tumor cells in vivo, which uncovered localized NCEH1 activity at the leading edge of triple‐negative breast cancer tumors, suggesting roles for NCEH1 in tumor aggressiveness and metastasis. 相似文献
High-performance porous carbons derived from tea waste were prepared by hydrothermal treatment, combined together with KOH activation. The heat-treatment-processed materials possess an abundant hierarchical structure, with a large specific surface of 2235 m2 g−1 and wetting-complemental hydrophilicity for electrolytes. In a two-electrode system, the porous carbon electrodes’ built-in supercapacitor exhibited a high specific capacitance of 256 F g−1 at 0.05 A g−1, an excellent capacitance retention of 95.4% after 10,000 cycles, and a low leakage current of 0.014 mA. In our work, the collective results present that the precursor crafted from the tea waste can be a promising strategy to prepare valuable electrodes for high-performance supercapacitors, which offers a practical strategy to recycle biowastes into manufactured materials in energy storage applications. 相似文献
In this paper,we consider a possible modification of the de Sitter and anti-de Sitter space for the extended uncertainty principle.For the modified anti-de Sitter model we discuss the representation and wave functions of the momentum operator for a one-dimensional box problem.Also,we consider modified Snyder and anti-Snyder models for the generalized uncertainty principle.Then,we assume the Hamiltonian with different potential and solve the Heisenberg algebra for the modified(anti)-de Sitter and(anti)-Snyder models in both position and in the momentum space. 相似文献
The rate of enzymatic degradation of surface‐modified microbial polyesters, poly[(R)‐3‐hydroxybutyrate] and poly[(R)‐3‐hydroxybutyrate‐co‐3‐hydroxyvalerate], was studied. The plasma treatments were carried out in a CF3H or O2 environment. It was found that the CF3H plasma‐treated polyesters exhibited significant retardation of enzymatic erosion because of the surface fluorocarbon groups induced by CF3H plasma. These surface fluorocarbon groups act as retardants on enzymatic degradation due to increased hydrophobicity and of the inactivity of enzymes. However, the increased surface hydrophilicity of polyesters induced by O2 plasma results in no significant acceleration of the enzymatic erosion, which may be due to the thin modified layer.
Weight loss profiles of P(3HB) film exposed to CF3H plasma as a function of plasma exposure time. 相似文献