Synthesis of a benzoxazine with precisely two phenolic OH linkages and the properties of its high‐performance copolymers

A phenolic OH‐containing benzoxazine ( F‐ap ), which cannot be directly synthesized from the condensation of bisphenol F, aminophenol, and formaldehyde by traditional procedures, has been successfully prepared in our alternative synthetic approach. F‐ap was prepared by three steps including (a) condensation of 4‐aminophenol and 5,5'‐methylenebis(2‐hydroxybenzaldehyde) (1) , (b) reduction of the resulting imine linkage by sodium borohydride, and (c) ring closure condensation by formaldehyde. The key starting material, (1) , was prepared from 2‐hydroxybenzaldehyde and s‐trioxane in the presence of sulfuric acid. F‐ap is structurally similar to bis(3,4‐dihydro‐2H‐3‐phenyl‐1,3‐benzoxazinyl)methane ( F‐a, a commercial benzoxazine based on bisphenol F/aniline/formaldehyde) except for two phenolic OHs. The phenolic OHs can provide reaction sites with epoxy and 1,1'‐(methylenedi‐p‐phenylene)bismaleimide (BMI). The structure–property relationships between the thermosets of F‐ap /epoxy, F‐a /epoxy, F‐ap /BMI, and F‐a /BMI were discussed. Experimental data showed that thermosets based on F‐ap /epoxy and F‐ap /BMI provided much better thermal properties than those based on F‐a /epoxy and F‐a /BMI. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2686–2694     

Coral reef-like polyanaline nanotubes prepared by a reactive template of manganese oxide for supercapacitor electrode

Coral reef-like PANI nanotubes composed of nanopaticles were successfully synthesized by a reactive template of manganese oxide.The structure was characterized by using SEM,TEM,and FT-IR,and the supercapacitive behaviors of these nanotubes were investigated with cyclic voltammetry（CV）,and charge-discharge tests,respectively.A maximum specific capacitance of 533 F/g could be achieved in 1mol/L aqueous H₂SO₄ with the potential range of -0.2 to 0.8 V（vs.the saturated calomel electrode） in a half-cell setup configuration for PANI electrode,suggesting its potential application in the electrode material for electrochemical capacitors.     

Diethyl phenylphosphonite contributing to solid electrolyte interphase and cathode electrolyte interphase for lithium metal batteries

Lithium metal batteries have obtained increasing interest due to their high specific capacity.Nonetheless,the growth of lithium dendrites brings safety risks to...     

Corrosion inhibition of ammonium molybdate for AA6061 alloy in NaCl solution and its synergistic effect with calcium gluconate

The corrosion inhibition of ammonium heltamolybdate (AH) and calcium gluconate (CG) for AA6061 alloy in 3% NaCl solution was investigated by the electrochemical measurements. It indicates that AH inhibits the corrosion of AA6061 alloy and acts as an anodic inhibitor. Maximum inhibition efficiency reaches 74.3% at the concentration of 1 × 10^?4 mol.l^?1 AH. The results of the electrochemical studies reveal AH is physically adsorbed on the AA6061 alloy surface and the adsorption follows Langmuir isotherm. The combination of AH and CG enhances the inhibition efficiency to 95.9%. The enhanced inhibition is attributed to the promotion of AH adsorption by CG. The mixture of AH and CG is a mixed‐type inhibitor and renders the corrosion potential to more positive values. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis of Nanosized Silicon Carbide Through Non-Transferred Arc Thermal Plasma

A thermal plasma system was used for the preparation of nanosized SiC powder. First SiC was synthesized by solid-state reaction using waste silicon and activated carbon powders and then plasma processing was carried out to form nanosized SiC. Phase and structural analysis was carried out by X-ray diffraction which confirmed the formation of SiC in both cases. Plasma treatment did not show any kind of change in structure and phase of SiC; except little free silicon. Morphological investigation showed the formation of 20–30 nm spherical SiC particles after plasma treatment which was initially 1–5 μm. It was found that DC current played an important role in the reduction of particle size. It was proposed that nanosized SiC was formed due to the dissociation of grains from their grain boundary due to strong plasma gas stream.     

Non-linear modeling and dynamic analysis of hydraulic control valve; effect of a decision factor between experiment and numerical simulation

Numerical problems that are usually ignored in the dynamic analysis of hydraulic control valves are described, and an analysis of the effects of such problems on the numerical modeling is provided. Previous studies have ignored the effects of changes in the flow coefficient in the orifice, the solenoid force along the spool movement in the valve and an ascending tendency of pressure during reach to the steady state. To eliminate these problems, it was studied a method to substantiate the non-linearity of the pressure loss caused by passing between the orifice and port as well as that caused by interaction with the solenoid. Moreover, the movement of the spool and spring is expressed using the time-delay-element (TDE). The proposed numerical model has been used in the Bond graphs method of a hydraulic control valve and the simulation results have been shown to be accurate. It is known that differences between simulated and experimental results can have a considerable impact on the function of actual systems. The contribution of each parameter is measured separately for the transient state and steady state. Analysis standard observed the first peak value, pressure increase to the steady state and the settling time in the response results.     

冲击波温度和压力对二氧化钛相变的影响

 介绍了一种简便易行的降低疏松固体物质冲击波温度的方法，其要点是用液体石蜡充填样品的空隙。以用粉末锐钛矿压装成型的样品为例，对比了不充填和充填液态石蜡时冲击波作用的结果。在同样的冲击加载条件下（均为钢飞片，撞击速度为3.16 km/s），估算两种样品中达到的压力分别为36.3 GPa和46.8 GPa，平均温度分别约为4.7×10³ ℃和2.0×10³ ℃，即：充填液态石蜡的样品中压力增加了约10 GPa，但平均温度降低了近3×10³ ℃。对冲击后回收样品的分析结果表明，不充填石蜡样品的主要产物为金红石，即冲击波产生的高温起了主要作用。而充填液态石蜡时，主要生成β-TiO₂高压相，即高压起了主要作用。