Dual Oxygen and Tungsten Vacancies on a WO3 Photoanode for Enhanced Water Oxidation

Alleviating charge recombination at the electrode/electrolyte interface by introducing an overlayer is considered an efficient approach to improve photoelectrochemical (PEC) water oxidation. A WO₃ overlayer with dual oxygen and tungsten vacancies was prepared by using a solution‐based reducing agent, LEDA (lithium dissolved in ethylenediamine), which improved the PEC performance of the mesoporous WO₃ photoanode dramatically. In comparison to the pristine samples, the interconnected WO₃ nanoparticles surrounded by a 2–2.5 nm thick overlayer exhibited a photocurrent density approximately 2.4 times higher and a marked cathodic shift of the onset potential, which is mainly attributed to the facilitative effect on interface charge transfer and the improved conductivity by enhanced charge carrier density. This simple and effective strategy may provide a new path to improve the PEC performance of other photoanodes.     

Simultaneous determination of udenafil and its active metabolite, DA-8164, in human plasma and urine using ultra-performance liquid chromatography-tandem mass spectrometry: application to a pharmacokinetic study

A rapid, sensitive, and simple ultra-performance liquid chromatography-tandem mass spectrometry (UPLC/MS/MS) method for the determination of udenafil and its active metabolite, DA-8164, in human plasma and urine using sildenafil as an internal standard (IS) was developed and validated. Udenafil, DA-8164 and IS from a 100 microL aliquot of biological samples were extracted by protein precipitation using acetonitrile. Chromatographic separation was carried on an Acquity UPLC BEH C(18) column (50 x 2.1 mm, i.d., 1.7 microm) with an isocratic mobile phase consisting of acetonitrile and containing 0.1% formic acid (75:25, v/v) at flow rate of 0.4 mL/min, and total run time was within 1 min. Detection and quantification was performed by the mass spectrometer using multiple reaction-monitoring mode at m/z 517 --> 283 for udenafil, m/z 406 --> 364 for DA-8164 and m/z 475 --> 100 for IS. The assay was linear over a concentration range of 1-600 ng/mL with a lower limit of quantification of 1 ng/mL in both human plasma and urine. The coefficient of variation of this assay precision was less than 13.7%, and the accuracy exceeded 92.0%. This method was successfully applied for pharmacokinetic study after oral administration of udenafil 100 mg to healthy Korean male volunteers.     

Simultaneous determination of tanshinone I, dihydrotanshinone I, tanshinone IIA and cryptotanshinone in rat plasma by liquid chromatography-tandem mass spectrometry: application to a pharmacokinetic study of a standardized fraction of Salvia miltiorrhiza, PF2401-SF

A rapid, sensitive and selective liquid chromatography-tandem mass spectrometric (LC-MS/MS) method for the simultaneous determination of tanshinone I, dihydrotanshinone I, tanshinone IIA and cryptotanshinone, the active components of Salvia miltiorrhiza in rat plasma, was developed. After liquid-liquid extraction with tariquidar as an internal standard, tanshinone I, dihydrotanshinone I, tanshinone IIA and cryptotanshinone were eluted from an Atlantis dC18 column within 5 min with a mixture of methanol and ammonium formate (10 mm, pH 6.5; 85:15, v/v). The analytes were detected by an electrospray ionization tandem mass spectrometry in the selected reaction monitoring (SRM) mode. The standard curves were linear (r=0.999) over the concentration range of 0.25-80 ng/mL for tanshinone I, dihydrotanshinone I, tanshinone IIA and cryptotanshinone in rat plasma. The coefficients of variation and the relative errors of tanshinone I, dihydrotanshinone I, tanshinone IIA and cryptotanshinone for intra- and inter-assay at four quality control (QC) concentrations were 1.1-5.1% and -4.0-6.0%, respectively. The lower limit of quantification for tanshinone I, dihydrotanshinone I, tanshinone IIA and cryptotanshinone was 0.25 ng/mL from 100 microL of plasma. This method was successfully applied to the pharmacokinetic study of tanshinone I, dihydrotanshinone I, tanshinone IIA and cryptotanshinone after oral administration of PF2401-SF, the standardized fraction of Salvia miltiorrhiza enriched with tanshinone I, dihydrotanshinone I, tanshinone IIA and cryptotanshinone to male Sprague-Dawley rats.     

A simple HPLC method for the quantification of mizoribine in human serum: pharmacokinetic applications

A simple high-performance liquid chromatographic (HPLC) method was developed and validated for the quantification of mizoribine in human serum. After the addition of 70% perchloric acid and 3-methylxanthine (50 microg/mL, internal standard) to human serum, the samples were mixed and centrifuged at 12,000 rpm (1432 g) for 10 min. The supernatant was injected onto a C(18) column eluted with a mobile phase of 20 mm Na2HPO4 and methanol (93:7, v/v, pH 3) containing 0.04% octanesulfonic acid and detected utilizing an ultraviolet detector at 275 nm. The linear calibration curve was obtained in the concentration range of 0.1-4.0 microg/mL and the lower limit of quantification was 0.1 microg/mL. This method was validated with selectivity, linearity, precision and accuracy. In addition, the method was successfully applied to estimate the pharmacokinetic parameters of mizoribine in Korean subjects following an oral administration of 100 mg mizoribine (two Bredinine 50 mg tablets). The maximum serum concentration (C(max)) of 2.30 +/- 0.83 microg/mL was reached 2.27 +/- 0.66 h after an oral dose. The mean AUC(0-12 h) and the elimination half-life (t(1/2)) were 13.2 +/- 4.79 microg h/mL and 3.10 +/- 0.74 h, respectively.     

Synthesis of polystyrene/SiO2 composite microparticles by dispersion polymerization in supercritical fluid

A novel synthetic route to prepare polystyrene/SiO₂ composite microparticles in supercritical carbon dioxide (scCO₂) is presented. Silica particles with the size of 130 nm which were surface-modified with 3-(trimethoxysilyl) propyl methacrylate were used as seeds in the dispersion polymerization of styrene in the presence of a polymeric stabilizer, poly(1,1-dihydroheptafluorobutyl methacrylate-co-diisopropylaminoethyl methacrylate) to produce dry composite particles. The transmission electron microscopy analysis revealed that the composite microspheres contained several silica particles.     

Separation and determination of polyethylene glycol fatty acid esters in cosmetics by a reversed-phase HPLC/ELSD

A comprehensive analytical method was established for the separation of polyethylene glycol (PEG) stearates according to the distribution of ethylene oxide (EO) and subsequent determination of the surfactants in cosmetic samples by using a high-performance liquid chromatography–evaporative light scattering detection. Separation of the PEG stearates comprising approximately up to 82 EO adducts was performed on a reversed-phase YMC-Pack C₈ column using water–acetonitrile gradient elution. The PEG oligomers were separated in order of the increasing number of EO adducts. Quantitation of the PEG fatty acid esters, which was separated as single peak per each component, was performed by chromatography on a reversed-phase Wakosil 10 C₁₈ column using water–methanol gradient elution. The standard curve to quantify the PEG stearates was constructed by the log–log plot, which showed good linearity with the correlation coefficients (R²) 0.998 and more. Working range, repeatability, limit of detection and recovery were acceptable for analysis of the surfactants in cosmetic products. The analytical methods were applied to characterize the PEG stearates according to the EO distributions, then to quantify the surfactants in cosmetic products.     

Terpyridine-based smart organic-inorganic hybrid gel as potential dye-adsorbing agent for water purification

A terpyridine-based organic-inorganic hybrid gelator possessing triethoxylsilane moiety was synthesized and its adsorption capacity for aromatic dyes in the absence and the presence of metal ions such as Zn²⁺ and Cu²⁺ was measured by UV-vis spectroscopy. From aqueous solutions of dyes, the hybrid gel, in the absence of metal ions, adsorbed 97.4% for basic blue 41, 94.2% for crystal violet, and 41.5% for bromocresol green. When metal ion was present, the adsorption capacity of dried hybrid gel 1 for the anionic dye bromocresol green significantly increased due to the enhanced electrostatic interaction between cationic gel and anionic dye. Thus, this hybrid gel can efficiently adsorb various toxic dyes in water.     

Sulfonated poly(fluorene-co-sulfone)ether membranes containing perfluorocyclobutane groups for fuel cell applications

A new class of sulfonated poly(fluorene-co-sulfone)ether membranes containing perfluorocyclobutane (PFCB) groups were synthesized and characterized in terms of their electrochemical properties as proton exchange membranes for fuel cells. Two monomers, 9,9-bis(4-trifluorovinyloxyphenyl)fluorene and 4,4′-sulfonyl-bis(trifluorovinyloxy)biphenyl were synthesized and statistically copolymerized by thermal [2π + 2π] cycloaddition to yield a series of polymers containing 0–60 mol% of fluorenyl content (PFS-X). The copolymers were then sulfonated using chlorosulfonic acid to afford five kinds of ionomers with different sulfonation levels (SPFS-X), which were cast into membranes and analyzed in terms of electrochemical properties. It was found that the ion exchange capacity (IEC), water uptake, proton conductivity and methanol permeability values of SPFS-X increased with the increment of the sulfonated fluorenyl content. The proton conductivities of SPFS-50 and -60 with high IECs and water uptake values were higher than those of Nafion-115 between 25 and 80 °C. The methanol permeability of SPFS-X was considerably lower than that of Nafion-115.     

Indolocarbazole-based foldamers capable of binding halides in water

A series of indolocarbazole-based foldamers have been prepared which can fold into a helical array with an internal cavity encircled by multiple indole NHs, thus allowing for binding anions by hydrogen bonds. The helical folding has been confirmed by computer modeling, 1H NMR spectroscopy, 2D ROESY experiments, and binding studies. A water-soluble derivative binds small, hydrophilic anions in the order Cl- > F- > Br- but negligibly with large, diffuse anions such as I- and ClO4-. Interestingly, the relative binding affinities of the fluoride and chloride ions in water are opposite to each other in an organic medium 4:1 (v/v) DMSO/MeOH, possibly due to the difference in the competing solvation energy.     

One-pot synthesis of robust core/shell gold nanoparticles

A one-pot synthesis of thermally stable core/shell gold nanoparticles (Au-NPs) was developed via surface-initiated atom transfer radical polymerization (ATRP) of n-butyl acrylate (BA) and a dimethacrylate-based cross-linker. The higher reactivity of the cross-linker enabled the formation of a thin cross-linked polymer shell around the surface of the Au-NP before the growth of linear polymer chains from the shell. The cross-linked polymer shell served as a robust protective layer, prevented the dissociation of linear polymer brushes from the surfaces of Au-NPs, and provided the Au-NPs excellent thermal stability at elevated temperature (e.g., 110 degrees C for 24 h). This synthetic method could be easily expanded for preparation of other types of inorganic/polymer nanocomposites with significantly improved stability.