Structural, photonic band-gap, and luminescence properties of the opal-erbium composite

Erbium oxide and silicates were embedded in the pores of synthetic opal by using the chemical bath deposition technique. Electron-microscopic images showed the synthesized compounds to be deposited predominantly in a thin uniform layer on the inner surface of the pores. An analysis of the transmittance spectra suggested that the opal-erbium composite thus obtained retained the photonic band-gap properties of the original ordered opal matrix. The Er³⁺ ions in the composite emitted light at several wavelengths in the visible and near-IR regions (550, 860, 980, 1240, 1530 nm) at 80 K.     

The study of structure by electron magnetic resonance methods. A brief history

An overview of the use of EPR in the determination of structure is given.     

Sign of excited state nuclearg-factors using gamma detected NMR/ON

Integral nuclear orientation and conventional CW NMR/ON studies using parity conserving gamma radiation can yield the nuclear moment μ, g and hence the nuclear spin, I, of the radioactive parent nuclei, but not the sign of g. In principle, the sign of g is accessible using parity non conserving beta radiation but is technically difficult; also, some nuclei decay without particle emission. We describe a novel spin echo NMR/ON technique that overcomes these previous difficulties and allows determination of the sign of the g-factor using gamma radiation.     

Nuclear magnetic resonance pulse sequence and discrimination of high- and low-fat tissues

Signal size compared to independently measured T1 is described for various pulse sequences on the Aberdeen Mk II nuclear magnetic resonance imager. The ability of these sequences to discriminate between certain tissue types, and in particular between adipose tissue and muscle, is discussed. Inversion recovery, with a t interval of 200 ms, gives the best discrimination for this purpose, with a contrast ratio of 6 between fat and muscle. Other image types, and especially T1, give better contrast for low-lipid soft tissue such as liver and spleen.     

Large-scale purification of antisense oligonucleotides by high-performance membrane adsorber chromatography

Very high flux ion-exchange membranes were utilized for a novel purification of antisense oligonucleotides (20-mer). Strong anion-exchange membranes were produced by attaching polymeric ligands onto a microporous cellulosic matrix. The oligonucleotides purified were therapeutic single-stranded phosphorothioates deoxyribonucleotides. Although small-scale membrane devices (15 cm2) had similar resolution to traditional chromatographic columns; their throughputs were superior. Greater than a 1300-fold scale-up produced very similar purity and yields of the phosphorothionate product. Scale-up experiments were conducted with a 2 m2 surface area membrane module. These modules were easily capable of very high throughputs of 0.5 to 2 l/min. High purity and yields were achieved by both step and linear gradient elution.     

Theoretical analysis of vertical colloidal deposition

We have modeled the dynamics of a relatively new deposition technique, vertical colloidal deposition (VCD), for preparing nanoparticle thin films. In this process, the substrate is placed vertically in a nanoparticle suspension and is gradually exposed by evaporation or other slow solvent removal. During the film's formation, we observe that the colloidal particles are deposited only at the solid-liquid-gas interface. In contrast with the horizontal geometry, treated elsewhere, where the meniscus is pinned, we observe qualitatively different deposition behaviors. In particular, uniform films rather than rings or lines are produced. Thus, we are led to model a diffusion-driven rather than a convection-driven film growth kinetics, and we are able to predict, consistent with our experimental observations, that the film's areal density is inversely proportional to the descent speed of the suspension surface. Additionally, we find that for submonolayer films, the areal density is proportional to the square of the suspension concentration, converting to a linear dependence once monolayer coverage is attained.     

Characterization of magnetic nanoparticles using energy-selected transmission electron microscopy.

Fe, Co, and Ni magnetic nanoparticles have been characterized using energy-selected imaging in a high-resolution transmission electron microscope. The samples comprised Fe/FeO x and Co/CoO x nanoparticles synthesized by inert gas evaporation and a Ni/C nano-composite prepared by a sonochemical method. All of the particles examined were found to be between 5 and 30 nm in size, with the Fe and Co crystals coated in 5-10 nm of metal oxide layer and the Ni metallic crystallites embedded in an amorphous carbon spherical matrix.     

Robust polymer microfluidic device fabrication via contact liquid photolithographic polymerization (CLiPP)

Microfluidic devices are commonly fabricated in silicon or glass using micromachining technology or elastomers using soft lithography methods; however, invariable bulk material properties, limited surface modification methods and difficulty in fabricating high aspect ratio devices prevent these materials from being utilized in numerous applications and/or lead to high fabrication costs. Contact Liquid Photolithographic Polymerization (CLiPP) was developed as an alternative microfabrication approach that uniquely exploits living radical photopolymerization chemistry to facilitate surface modification of device components, fabrication of high aspect ratio structures from many different materials with numerous covalently-adhered layers and facile construction of three-dimensional devices. This contribution describes CLiPP and demonstrates unique advantages of this new technology for microfabrication of polymeric microdevices. Specifically, the procedure for fabricating devices with CLiPP is presented, the living radical photopolymerization chemistry which enables this technology is described, and examples of devices made using CLiPP are shown.