Long-wavelength (lambda approximately 8-11.5 microm) semiconductor lasers with waveguides based on surface plasmons

Laser waveguides based on surface plasmons at a metal-semiconductor interface have been demonstrated by use of quantum cascade (QC) lasers emitting in the 8-11.5-microm wavelength range. The guided modes are transverse magnetic polarized surface waves that propagate at the metal (Pd or Ti-Au)-semiconductor interface between the laser top contact and the active region without the necessity for waveguide cladding layers. The resultant structure has the advantages of a strong decrease in the total layer thickness and a higher confinement factor of the laser-active region compared with those of a conventional layered semiconductor waveguide, and strong coupling to the active material, which could be used in devices such as distributed-feedback lasers. These advantages have to be traded against the disadvantage of increased absorption losses. A peak output power exceeding 25 mW at 90 K and a maximum operating temperature of 150 K were measured for a QC laser with an emission wavelength lambda approximately 8 microm . At lambda approximately 11.5 microm the peak power levels are several milliwatts and the maximum operating temperature is 110 K.     

Dual-wavelength emission from optically cascaded intersubband transitions

Dual-wavelength intersubband emission at 8 and 10 microm is reported in a three-level quantum-well system in which one electronic state is at the same time the lower level of the first optical transition and the upper level of the second. Results are presented for two different AlInAs/GaInAs quantum cascade structures featuring single-well active regions with two vertical transitions or double-well active regions with one diagonal and one vertical transition. Laser action has been achieved between the excited states of the single-well device and on the diagonal transition of the double-well structure. In the latter case the wavelength can be electric-field tuned by means of the Stark effect also above threshold.     

Insights about the biosynthesis of the avermectin deoxysugar L-oleandrose through heterologous expression of Streptomyces avermitilis deoxysugar genes in Streptomyces lividans.

BACKGROUND: The avermectins, produced by Streptomyces avermitilis, are potent anthelminthic agents with a polyketide-derived macrolide skeleton linked to a disaccharide composed of two alpha-linked L-oleandrose units. Eight contiguous genes, avrBCDEFGHI (also called aveBI-BVIII), are located within the avermectin-producing gene cluster and have previously been mapped to the biosynthesis and attachment of thymidinediphospho-oleandrose to the avermectin aglycone. This gene cassette provides a convenient way to study the biosynthesis of 2,6-dideoxysugars, namely that of L-oleandrose, and to explore ways to alter the biosynthesis and structures of the avermectins by combinatorial biosynthesis. RESULTS: A Streptomyces lividans strain harboring a single plasmid with the avrBCDEFGHI genes in which avrBEDC and avrIHGF were expressed under control of the actI and actIII promoters, respectively, correctly glycosylated exogenous avermectin A1a aglycone with identical oleandrose units to yield avermectin A1a. Modified versions of this minimal gene set produced novel mono- and disaccharide avermectins. The results provide further insight into the biosynthesis of L-oleandrose. CONCLUSIONS: The plasmid-based reconstruction of the avr deoxysugar genes for expression in a heterologous system combined with biotransformation has led to new information about the mechanism of 2,6-deoxysugar biosynthesis. The structures of the di-demethyldeoxysugar avermectins accumulated indicate that in the oleandrose pathway the stereochemistry at C-3 is ultimately determined by the 3-O-methyltransferase and not by the 3-ketoreductase or a possible 3,5-epimerase. The AvrF protein is therefore a 5-epimerase and not a 3,5-epimerase. The ability of the AvrB (mono-)glycosyltransferase to accommodate different deoxysugar intermediates is evident from the structures of the novel avermectins produced.     

Temperature Modulated Differential Scanning Calorimetry Part IV. Effect of heat transfer on the measurement of heat capacity using quasi-isothermal ADSC

An analysis developed in previous work has been further refined in order to study the effect of heat transfer on the heat capacity and phase angle measurements by TMDSC. In the present model, a temperature gradient within the sample has been taken into account by allowing for heat transfer by thermal conduction within the sample. The influence of the properties of the sensors, the heat transfer conditions between the sensor and sample,and the properties of the sample have been investigated by varying each parameter in turn. The results show that heat capacity measurements are reliable only within a restricted frequency range, for which the experimental conditions are such that the heat transfer phase angle depends linearly on the modulation frequency. This revised version was published online in July 2006 with corrections to the Cover Date.     

Penultimate Propagation Kinetics of Butyl Methacrylate,Butyl Acrylate,and Styrene Terpolymerization

The pulsed‐laser polymerization technique is used to determine the composition‐averaged free‐radical propagation rate coefficient (k_p,ter) for terpolymerization of butyl methacrylate, butyl acrylate, and styrene between 60 and 120 °C. A significant deviation from terminal model predictions is observed for the ternary system, indicating that penultimate kinetics are important at these industrially relevant temperatures. The implicit penultimate propagation model, with all the coefficients taken from previous studies of the binary systems, provides a good prediction of the experimental k_p,ter results.

     

High Temperature Semibatch Free Radical Copolymerization of Butyl Methacrylate and Styrene

High temperature starved feed semibatch solution polymerization is used to produce acrylic resins for automotive coatings. These operating conditions promote secondary reactions that have a strong impact on polymerization rate and polymer molecular weight (MW). This study experimentally investigates high temperature semibatch copolymerization of butyl methacrylate and styrene, a system subject to the combined effect of depropagation and penultimate propagation kinetics. A mechanistic model including these complexities is constructed in Predic®. With the termination rate coefficient fit to the semibatch results and all other coefficients taken from independent experiments, the model provides good predictions of monomer conversion and MW. Various representations of copolymer termination kinetics from the literature are compared to the values fit from experiment.