Synthesis and properties of macrocyclic diazene switch with binaphthalene unit attached via acrylamide linkers

2,2′-Diiodo-1,1′-binaphthalene undergoes a tandem Heck reaction with methyl acrylate to afford methyl 2-(7H-dibenzo[c,g]fluoren-7-ylidene)acetate. As a consequence, the target macrocyclic diazene with binaphthalene unit attached via acrylamide linker was prepared by the stepwise building of acrylamide at a binaphthalene moiety, including the Doebner modification of the Knoevenagel condensation, and completed by oxidative macrocyclisation of aniline end-groups. Despite being an equimolar mixture of monomer and dimer, it exhibited remarkable changes in CD spectra due to reversible (E/Z) isomerisation of N=N diazene bonds upon irradiation at 365/465 nm. Although the dimer isomerises from (E) to (Z) isomer 7.4 times faster than the monomer, the latter’s contribution to the change in ellipticity at 307 nm in the photostationary state is 2.4 times greater.     

Spectral characterisation of new organic fluorescent dyes with an alkoxysilane moiety and their utilisation for the labelling of layered silicates

New fluorescence dyes with an alkoxysilane moiety were synthesised by the condensation of 3-(triethoxysilyl)-1-propanamine (3-aminopropyltriethoxysilane) with 4,10-benzothioxanthene-3,1′-dicarboxylic acid anhydride (BTXA) and N,N-dimethylaminonaphthalene-1,8-dicarboxylic acid anhydride (DMANA), which was accompanied by the formation of an imidic bridge. The compounds N-(3-(triethoxysilyl)propyl)-thioxantheno[2,1,9-dej]isoquinoline-1,3-dione (BTX-S) and 4-(N′, N′-dimethyl)-N-(triethoxysilyl)propyl-1,8-naphthalene dicarboxylic acid imide (DMAN-S) were characterised by steady-state and time-resolved fluorescence spectroscopy in chloroform and ethanol. Both conjugates (BTX-S and DMAN-S) exhibited absorption and emission bands in the same region as the un-substituted BTXA and DMANA. An important Stokes shift was observed for DMAN-S in ethanol. A high fluorescence quantum yield was observed for BTX-S in both solvents and for DMAN-S in chloroform. In addition, the newly developed fluorescent silane dyes were covalently attached to the microscopic particles of layered silicates and on the surface of SiO₂ wafers as a proof of concept for fluorescence particle (surface) visualisation. The surface wafer modification was precisely characterised by X-ray photoelectron spectroscopy (XPS). Successful covalent linkage onto the particles of layered silicates was proved by confocal laser scanning microscopy technique.     

At-line bioprocess monitoring by immunoassay with rotationally controlled serial siphoning and integrated supercritical angle fluorescence optics

In this paper we report a centrifugal microfluidic “lab-on-a-disc” system for at-line monitoring of human immunoglobulin G (hIgG) in a typical bioprocess environment. The novelty of this device is the combination of a heterogeneous sandwich immunoassay on a serial siphon-enabled microfluidic disc with automated sequential reagent delivery and surface-confined supercritical angle fluorescence (SAF)-based detection. The device, which is compact, easy-to-use and inexpensive, enables rapid detection of hIgG from a bioprocess sample. This was achieved with, an injection moulded SAF lens that was functionalized with aminopropyltriethoxysilane (APTES) using plasma enhanced chemical vapour deposition (PECVD) for the immobilization of protein A, and a hybrid integration with a microfluidic disc substrate. Advanced flow control, including the time-sequenced release of on-board liquid reagents, was implemented by serial siphoning with ancillary capillary stops. The concentration of surfactant in each assay reagent was optimized to ensure proper functioning of the siphon-based flow control. The entire automated microfluidic assay process is completed in less than 30 min. The developed prototype system was used to accurately measure industrial bioprocess samples that contained 10 mg mL⁻¹ of hIgG.     

Combating Multidrug‐Resistant Bacteria: Current Strategies for the Discovery of Novel Antibacterials

The introduction of effective antibacterial therapies for infectious diseases in the mid‐20th century completely revolutionized clinical practices and helped to facilitate the development of modern medicine. Many potentially life‐threatening conditions became easily curable, greatly reducing the incidence of death or disability resulting from bacterial infections. This overwhelming historical success makes it very difficult to imagine life without effective antibacterials; however, the inexorable rise of antibiotic resistance has made this a very real and disturbing possibility for some infections. The ruthless selection for resistant bacteria, coupled with insufficient investment in antibacterial research, has led to a steady decline in the efficacy of existing therapies and a paucity of novel structural classes with which to replace them, or complement their use. This situation has resulted in a very pressing need for the discovery of novel antibiotics and treatment strategies, the development of which is likely to be a key challenge to 21st century medicinal chemistry.     

Effects of Geomaterial-Originated Fillers on Microstructure and Mechanical/Physical Properties of α- and β-Chitosan-Based Films

Edible films and coatings with good mechanical/physical properties are highly required for carrying medical substances and food packaging. So, solvent-cast films of α- or β-chitosan filled with palygorskite, montmorillonite or geopolymer-containing material (GCM), were prepared, and the effects of their clay contents (up to 50 wt.%) on the mechanical/physical properties were assessed. The microstructure of the films was investigated using FT-IR spectroscopy, SEM and thermal analysis. The results showed that, except for the films composed of GCM and β-chitosan, the mechanical properties of the films with limited (up to 5 wt.%) to moderate (5–25 wt.%) amounts of fillers increased as a result of the attractive electrostatic forces formed between the fillers and chitosan functional groups (–NH₃⁺, CH₂OH and NHCOCH₃). However, due to the occurrence of coarse aggregates, the strength of filler-rich films declined. The addition of fillers led to an increase in porosity and water absorption of the films, but it had irregular effects on their wettability and water vapor transmission rate. These observations as well as the thermal stability of the films were discussed in relation to the characterization results.     

(A19N7)[In4]2 (A = Ca,Sr) and (Ca4N)[In2]: Synthesis,Crystal Structures,Physical Properties,and Chemical Bonding

Single phase powders of (A₁₉N₇)[In₄]₂ (A = Ca, Sr) and (Ca₄N)[In₂] were prepared by reaction of melt beads of the metallic components with nitrogen. The crystal structure of (Ca₁₉N₇)[In₄]₂ was refined based on neutron and X‐ray powder diffraction data. The crystal structure of (Sr₁₉N₇)[In₄]₂ was solved from the X‐ray powder pattern. The structure refinements in combination with results from chemical analyses ascertain the compositions. The compounds (A₁₉N₇)[In₄]₂ (A = Ca, Sr) are isotypes of (Ca₁₉N₇)[Ag₄]₂; (Ca₁₉N₇)[In₄]₂ is probably identical to the earlier reported (Ca_18.5N₇)[In₄]₂. The crystal structure of the isotypes (A₁₉N₇)[In₄]₂ (A = Ca, Sr; cubic, , Ca: a = 1471.65(3) pm; Sr: a = 1561.0(1) pm) contains isolated [In₄] tetrahedra embedded in a framework of edge‐ and vertex‐sharing (A₆N) octahedra. Six of these octahedra are condensed by edge‐sharing around one central A²⁺ ion to form “superoctahedra” (A₁₉N₆) which are connected three‐dimensionally via further octahedra by corner‐sharing. The crystal structure of (Ca₄N)[In₂] (tetragonal, I4₁/amd, a = 491.14(4) pm, c = 2907.7(3) pm) consists of alternating layers of perovskite type slabs of vertex‐sharing octahedra (Ca₂Ca_4/2N) and parallel arranged infinite zigzag chains equation/tex2gif-stack-1.gif[In₂]. In the sense of Zintl‐type counting the compounds (A²⁺)₁₉(N^3?)₇[(In^2.125?)₄]₂ present an electron excess, (Ca²⁺)₄(N^3?)[(In^2.5?)₂] is electron deficient. Metallic properties are supported by electrical resistivity and magnetic susceptibility measurements. The analysis of the electronic structures gives evidence for the existence of homoatomic interactions In–In and significant heteroatomic metal–metal interactions Ca–In which favor the deviations of the title compounds from the (8 – N) rule.     

Preparation,Solid‐state Characteristics,and Catalytic Properties of Promoted Vanadium Phosphate Materials

The syntheses of transition metal promoted (M = Co, Cr, Fe, Mo) supported vanadium phosphate (VPO) catalysts (TiO₂ (anatase), γ‐Al₂O₃) and their characterization by N₂‐adsorption, X‐ray diffractometry (XRD), FTIR‐spectroscopy and determination of V‐valence state is reported. The catalytic properties were checked in the heterogeneous catalytic ammoxidation of 2, 6‐dichlorotoluene to the corresponding nitrile. The catalyst samples were prepared by synthesis of the precursor compound VOHPO₄ · 0.5 H₂O, impregnation using various metal salt solutions and mixing with the support materials. The characterization revealed increased surface areas for all the promoted samples in comparison to the basic materials. XRD showed the formation of (VO)₂P₂O₇ after calcinations as well as patterns of support materials (anatase, γ‐Al₂O₃). The formation of crystalline proportions of mixed oxides were not observed. The catalytic ammoxidation runs revealed a significant effect of the promoter metals on the catalytic properties by an increase of yield by ca. 20 % compared to bulk VPO. Almost complete conversion of 2, 6‐dichlorotoluene and 81 % yield of nitrile were observed using a 25 %VPCoO/γ‐Al₂O₃ catalyst.