Syntheses of the first N-mono- and N,N'-dipolyfluoroalkyl-4,4'-bipyridinium compounds

Reactions of 4,4'-bipyridine (1) with excess of polyfluoroalkyl iodides (2a-d) at 100-110 degrees C, under neat conditions, led to the formation of monoquaternary salts (3a-d) in > 90% yields. Salts 3a-d were metathesized with LiN(SO2CF3)2 either in water or water/acetone mixtures to form ionic liquids (4a-d), respectively, in > 88% yields. When 1 was reacted with 2.5 equivalent of 2a-c in DMF at 110 degrees C, the diquaternary salts 5a-c were formed in > 85% yields. Alternatively, 5a-c were also synthesized by heating a mixture of 3a-c and 2a-c (1.25 equivalent) in DMF. The metathesis reaction of 5a-c with LiN(SO2CF3)2 produced dicationic ionic liquids (6a-c) in > 86% yield.     

A gravimetric and an X-ray fluorescence method for the determination of rubidium in Rb2U(SO4)3

Chemical characterization of rubidium uranium(IV) trisulfate, Rb₂U(SO₄)₃, a new chemical assay standard for uranium requires accurate analysis of rubidium. A gravimetric and an X-ray fluorescence method (XRF) for the determination of rubidium in this compound are described. In the gravimetric method, rubidium is determined as Rb₂Na[Co(NO₂)₆].H₂O without separating uranium with a precision of the order of ±0.5%. In the XRF method, the concentration ratio of rubidium to uranium, C_Rb/C_U, is determined in the solid samples by the binary ratio method using calibration between intensity ratios (I_Rb/I_U) and concentration ratios (C_Rb/C_U). The concentration of rubidium is derived using the uranium value which is known with a precision better than ±0.05%. The XRF method has a precision better than ±0.8% for rubidium determination.     

2,3-Dihydroxypyridine Loaded Amberlite XAD-2 (AXAD-2-DHP): Preparation, Sorption–Desorption Equilibria with Metal Ions, and Applications in Quantitative Metal Ion Enrichment from Water, Milk and Vitamin Samples

2,3-Dihydroxypyridine loaded (via –N=N–linker) Amberlite XAD-2 (AXAD-2-DHP) was prepared and characterized by elemental analyses, TGA and FT-IR spectra. It (1g packed in a column of 1cm diameter; surface area 135.5m²g^–1) was found to be an effective solid phase sorbent for enriching Zn²⁺, Mn²⁺, Ni²⁺, Pb²⁺, Cd²⁺, Cu²⁺, Fe³⁺ and Co²⁺ at pH 3.5 to 7.0 using flow rates between 1.0–5.0mLmin^–1. For desorption (recovery 97.0–99.8%) of the metal ions, 8 to 10mL of 2.0molL^–1 HCl or 1.5molL^–1 HNO₃ at a flow rate of between 2.0 and 4.0mLmin^–1 were found most suitable. The t_1/2 (time for 50% sorption) is between 2 and 10min when a 50mL solution (containing a total amount of metal of 2mg) was equilibrated with 0.5g of resin. Sorption of all metal ions except Pb²⁺ follows the Langmuir model, whereas for Pb the data fits with the Freundlich model. The sorption capacity is between 60.7 (for Cd) and 406.7 (for Cu) µmolg^–1. The resin can withstand an acid concentration of 6molL^–1 and can be reused for thirty cycles of sorption–desorption. The preconcentration factor varies between 100 and 300. For Cd, Ni and Cu the sorption capacity of 2,3-dihydroxypyridine loaded cellulose is lower than that of the present resin. The tolerance limits of electrolytes, humic acid, complexing agents, Ca²⁺ and Mg²⁺ in the enrichment of all metal ions are reported. The limits of detection are 3.88, 5.37, 8.72, 13.88, 4.71, 1.24, 0.59 and 0.30µgL^–1 for Zn²⁺, Mn²⁺, Ni²⁺, Pb²⁺, Cd²⁺, Cu²⁺, Fe³⁺ and Co²⁺, respectively. The calibration curves for flame AAS determination were linear in the ranges 0.018–1.0, 0.067–5.0, 0.2–5.0, 0.9–20, 0.028–2.0, 0.077–5.0, 0.19–10 and 0.1–3.5µgmL^–1, respectively. All the eight metal ions in river and synthetic water samples, Co in vitamin tablets and Zn in milk samples have been quantitatively enriched with Amberlite XAD-2-DHP and determined by flame atomic absorption spectrometry.     

Inorganic-Organic Hybrid Polymers from the Polymerisation of Methacrylate-Substituted Oxotantalum Clusters with Methylmethacrylate: A Thermomechanical and Spectroscopic Study

New inorganic-organic hybrid materials were prepared by free-radical polymerization of methyl methacrylate (MMA) with methacrylate-substituted oxotantalum cluster [Ta₄O₄(OEt)₈(OMc)₄] and their properties evaluated. The cluster was prepared by the reaction of the parent alkoxide with methacrylic acid. Samples of the hybrid materials were produced with Ta-cluster to methyl methacrylate in the ratios of 1:50 and 1:100 and were characterized by thermal and spectroscopic techniques. The glass transition temperatures of the hybrid materials are shifted to higher temperatures than pure PMMA as a result of cross-linking of the polymer by the oxotantalum clusters. The increase in T_g is also observed from the dynamic mechanical analysis (DMA). Evidence of crosslinking between the Ta-cluster and PMMA is obtained from infrared spectroscopic study. Surface studies performed by X-ray photoelectron spectroscopy (XPS) provide information about the atomic concentrations of the surface and indicate tantalum bonded to oxygen.     

Rapid separation of phenylthiohydantoin amino acids: ambient pressure ion-mobility mass spectrometry (IMMS)

An electrospray ionization (ESI) ambient pressure ion-mobility spectrometer (APIMS) interfaced to an orthogonal reflector time-of-flight mass spectrometer (TOFMS) was evaluated for the first time as a detector for the identification of phenylthiohydantoin (PTH)-derivatized amino acids, the final products in the Edman sequencing process of peptides and proteins. The drift and flight times of the twenty common PTH amino acids were characterized by a well-defined 2-D mobility/mass spectral pattern. The combination of mobility/mass modes of analysis gave rise to a unique trend-line formation for the series of PTH amino acids. In addition, each PTH amino acid had a unique reduced mobility constant K(o), thus enabling the differentiation of all the amino acid derivatives including the PTH-leucine and PTH-isoleucine isomers. More importantly it was shown that it was possible to resolve a complete reference mixture of PTH amino acids in a single experimental run in less than 1 min. Detection limits for the PTH amino acids were found to range from 1.04 to 3.52 ng; indicating that the limits of detection were less than 17.0 pmol for all of the PTH amino acids.     

Influence of inhibitory compounds and minor sugars on xylitol production by <Emphasis Type="Italic">Debaryomyces hansenii</Emphasis>

To obtain in-depth information on the overall metabolic behavior of the new good xylitol producer Debaryomyces hansenii UFV-170, batch bioconversions were carried out using semisynthetic media with compositions simulating those of typical acidic hemicellulose hydrolysates of sugarcane bagasse. For this purpose, we used media containing glucose (4.3–6.5 g/L), xylose (60.1–92.1 g/L), or arabinose (5.9–9.2 g/L), or binary or ternary mixtures of them in either the presence or absence of typical inhibitors of acidic hydrolysates, such as furfural (1.0–5.0 g/L), hydroxymethylfurfural (0.01–0.30 g/L), acetic acid (0.5–3.0 g/L), and vanillin (0.5–3.0 g/L). D. hansenii exhibited a good tolerance to high sugar concentrations as well as to the presence of inhibiting compounds in the fermentation media. It was able to produce xylitol only from xylose, arabitol from arabinose, and no glucitol from glucose. Arabinose metabolization was incomplete, while ethanol was mainly produced from glucose and, to a lesser less extent, from xylose and arabinose. The results suggest potential application of this strain in xyloseto-xylitol bioconversion from complex xylose media from lignocellulosic materials.     

Mixed ligand palladium(II) and platinum(II) complexes of tertiary diphosphines and benz-1,3-imidazoline-2-thione,benz-1,3-oxazoline-2-thione or benz-1,3-thiazoline-2-thione

Palladium(II) and platinum(II) complexes containing the mixed ligands tertiary diphosphines Ph₂P(CH₂) _n PPh₂, (n = 1–4) and benz-1,3-imidazoline-2-thione, benz-1,3-oxazoline-2-thione or benz-1,3-thiazoline-2-thione have been prepared and characterized by elemental analysis, magnetic susceptibility, molar conductance and i.r. spectral data. ³¹P–{¹H}-n.m.r. data have been applied to characterize the produced linkage isomers.     

R7-binding protein targets the G protein β5/R7-regulator of G protein signaling complex to lipid rafts in neuronal cells and brain

Background  

Heterotrimeric guanine nucleotide-binding regulatory proteins (G proteins), composed of Gα, Gβ, and Gγ subunits, are positioned at the inner face of the plasma membrane and relay signals from activated G protein-coupled cell surface receptors to various signaling pathways. Gβ5 is the most structurally divergent Gβ isoform and forms tight heterodimers with regulator of G protein signalling (RGS) proteins of the R7 subfamily (R7-RGS). The subcellular localization of Gβ 5/R7-RGS protein complexes is regulated by the palmitoylation status of the associated R7-binding protein (R7BP), a recently discovered SNARE-like protein. We investigate here whether R7BP controls the targeting of Gβ5/R7-RGS complexes to lipid rafts, cholesterol-rich membrane microdomains where conventional heterotrimeric G proteins and some effector proteins are concentrated in neurons and brain.     

{\rtf1\ansi\ansicpg1250\deff0\deflang1038\deflangfe1038\deftab708{\fonttbl{\f0\froman\fprq2\fcharset238{\*\fname Times New Roman;}Times New Roman CE;}} \viewkind4\uc1\pard\f0\fs20 Processing of non-isothermal TG data \par }

Decomposition of dichlorodifluoromethane in thermal plasma was investigated theoretically by computing the equilibrium composition of the gas mixtures involving carbon, chlorine and fluorine in presence of argon (which is assumed to be the main plasma gas) and/or in addition of hydrogen and calcium together with hydrogen. The calculations were carried out for the temperature range between 500 and 6000 K and for the total pressure of the system of 1 bar. Use is made of the fact that a thermal plasma is a plasma in (local) thermal equilibrium, which makes possible the theoretical determination of its equilibrium composition at definite temperature by employing Gibbs free energy data for the compounds present in the system and assuming that the equilibrium of the system corresponds to its minimum energy state. The results of calculations show that toxic molecules and radicals can be, under convenient conditions (appropriate temperature and amount of added substances), converted into stable non-toxic species like CaF₂ and CaCl₂.     

Vinyl polymerization: Kinetics of Ce(IV)–acetophenone-initiated polymerization of acrylonitrile in acetic–sulfuric acid mixtures

The polymerization of acrylonitrile (M) initiated by the Ce(IV)–acetophenone (AP) redox pair has been studied in acetic–sulfuric acid mixtures in a nitrogen atmosphere. The rate of polymerization is proportional to [M]^3/2, [AP]^1/2 and [Ce(IV)]^1/2. The rate of disappearance of ceric ion,–R_Ce, is proportional to [AP], [M], and [Ce(IV)]. The effect of certain salts, solvent, acid and temperature on both the rates have been investigated. A suitable kinetic scheme has been proposed, and the composite rate constants k_p ²(k/k/_t) and k₀/k_i are reported.