Synthesis and bio-applications of targeted magnetic-fluorescent composite nanoparticles

Magnetic-fluorescent nanoparticles have a tremendous potential in biology. As the benefits of these materials gained recognition, increasing attention has been given to the conjugation of magnetic-fluorescent nanoparticles with targeting ligands. The magnetic and fluorescent properties of nanoparticles offer several functionalities, including imaging, separation, and visualization, while the presence of a targeting ligand allows for selective cell and tissue targeting. In this review, methods for the synthesis of targeted magnetic-fluorescent nanoparticles are explored, and recent applications of these nanocomposites to the detection and separation of biomolecules, fluorescent and magnetic resonance imaging, and cancer diagnosis and treatment will be summarized. As these materials are further optimized, targeted magnetic-fluorescent nanoparticles hold great promise for the diagnosis and treatment of some diseases.     

双钙钛矿LaM2VO6:Eu3+（M=Mg,Ca,Sr,Ba）荧光纳米材料的制备及发光性能的研究

采用凝胶-燃烧法合成了LaM₂VO₆:Eu³⁺（M=Mg,Ca,Sr,Ba）系列红色纳米荧光粉。通过X射线衍射、扫描电镜及荧光光谱等检测方法,研究了不同碱土金属离子掺杂Eu³⁺荧光粉基质的晶体结构、形貌及其光致发光性能。结果表明:采用凝胶-燃烧法制备的LaM₂VO₆:Eu³⁺（M=Mg,Ca,Sr,Ba）红色荧光粉结晶良好、晶相单一且具有良好的发光性能;其中掺Mg基质LaMg₂VO₆:Eu³⁺荧光粉的发光性能最好。当引燃温度为800℃,保温时间1h,Eu³⁺的掺杂量x=0.11时所得荧光材料发光效果最优。 更多还原     

铁电陶瓷微观电畴演化的成核率模型

大量的实验已经证实电畴翻转是铁电材料非线性和迟滞性本构曲线的根本原因.根据这些描述电畴运动的物理实验结果,提出了成核率模型来模拟铁电材料的非线性本构行为.进一步由模型建立了基于微观电畴运动的电畴翻转体积分数演化方程.应用该模型得到的理论计算结果与实验数据的比较表明,模型能够描述铁电材料的非线性本构行为.同时模型所揭示的微观电畴成核的演化行为可进一步的指导宏观唯象模型的建立与改进.     

Determination of Methyl Methanesulfonate and Ethyl Methylsulfonate in New Drug for the Treatment of Fatty Liver Using Derivatization Followed by High-Performance Liquid Chromatography with Ultraviolet Detection

A new derivatization high-performance liquid chromatography method with ultraviolet detection was developed and validated for the quantitative analysis of methanesulfonate genotoxic impurities in an innovative drug for the treatment of non-alcoholic fatty liver disease. In this study, sodium dibenzyldithiocarbamate was used as a derivatization reagent for the first time to enhance the sensitivity of the analysis, and NaOH aqueous solution was chosen as a pH regulator to avoid the interference of the drug matrix. Several key experimental parameters of the derivatization reaction were investigated and optimized. In addition, specificity, linearity, precision, stability, and accuracy were validated. The determined results of the samples were consistent with those obtained from the derivatization gas chromatography–mass spectrometry analysis. Thus, the proposed method is a reliable and practical protocol for the determination of trace methanesulfonate genotoxic impurities in drugs containing mesylate groups.     

Two New Phenolic Glycosides with Lactone Structural Units from Leaves of Ardisia crenata Sims with Antibacterial and Anti-Inflammatory Activities

Two new lactones, named Ardisicreolides A–B (1–2), together with four known flavonoids, Quercetin (3), Myricetrin (4), Quercitrin (5), Tamarixetin 3-O-rhamnoside (6), were isolated from the ethyl acetate portion of 70% ethanol extracts of dried leaves from Ardisia crenata Sims. These compounds were identified from Ardisia crenata Sims for the first time. The structures of 1–6 were elucidated according to 1D and 2D-NMR methods and together with the published literature. All of the isolated compounds were evaluated for in vitro anti-microbial effect against Escherichia coli, Pseudomonas aeuroginosa, Enterococcus faecalis, Proteus vulgaris, Staphylococcus aureus, and Bacillus subtilis. In addition, compounds 1–2 were assessed for anti-inflammatory activity by acting on LPS-induced RAW 264.7 macrophage cells in vitro. The results showed that only compound 2 exhibited moderate antibacterial activity on Bacillus subtilis. Moreover, compounds 1 and 2 were found to significantly inhibit the production of nitric oxide (NO) and reduce the release of tumor necrosis factor-α (TNF-α), interleukin-1β (IL-1β), interleukin-4 (IL-4), and interleukin-10 (IL-10) in LPS-induced RAW 264.7 macrophage cells. The present data suggest that lactones from the leaves of A. crenata Sims might be used as a potential source of natural anti-inflammatory agents.     

On the alpha --> beta transition of carbon-coated highly oriented PVDF ultrathin film induced by melt recrystallization

Poly(vinylidene fluoride) (PVDF) is one of the polymers which exhibit pronounced polymorphic crystalline forms, depending on crystallization conditions. Four different crystalline modifications, i.e., alpha, beta, gamma, and delta, have been reported so far. Among them, even though the alpha-form is the most common one, the beta-phase is the one that has attracted the widest interest due to its extensive piezo- and pyroelectric applications. During the past few decades, a substantial amount of work has been done in attempts to characterize these crystal modifications and transformations among them. It was well documented that the alpha-form PVDF can be easily obtained through melt crystallization of the PVDF at atmospheric pressure. Its beta-counterpart can, however, only be directly obtained by growth from solution, molecular epitaxy on the surface of potassium bromide, melt crystallization at high pressures, or by applying with a strong electric field. Transformation from its alpha-phase to beta-phase has been achieved by mechanical deformation, while the retransformation could be conducted through melt recrystallization at atmospheric pressure. In the present work, the recrystallization behavior of carbon-coated melt-drawn oriented PVDF ultrathin films at atmospheric pressure was studied by means of transmission electron microscopy and electron diffraction. The results indicate that through vacuum evaporating a thin carbon layer on the surface of highly oriented alpha-PVDF ultrathin film, not only has its high orientation been preserved after a complete melting and recrystallization process, but an alpha --> beta transition of PVDF has also been achieved through melt recrystallization at atmospheric pressure. This technique can be successfully used for preparing highly oriented beta-PVDF ultrathin films, especially patterned microstructures of PVDF with its highly oriented polar beta-phase and nonoriented nonpolar alpha-phase.     

微量量热法研究肌动蛋白的聚合及顺铂的影响

肌动蛋白（actin）是细胞微丝系统的结构蛋白·单体G一肌动蛋白与聚合产物F一肌动蛋白间的相互转变与细胞的运动、形态和信息传递相关＊．实际上，微丝系统处在一个动态平衡状态．即G和F不断相互转换以适应细胞功能要求．在外源性物质影响下，这个动态平衡可能被影响而产生相应的药理、毒理作用．罗世荣等问报导在荧光显微镜下观察到，顺铂（抗癌药）及其类似物会诱导微丝的重组和解聚．但机理有待研究·目前虽然有许多方法被用来研究肌动蛋白的聚合过程问，但对聚合全过程的确切描述尚无充分的实验数据，对聚合热动力学过程的研究至今尚…     

Crystallization behavior of a propylene-1-butene random copolymer in its α and γ modifications

A random propylene-based copolymer containing 1.0 mol% 1-butene as co-unit, synthesized with Ziegler-Natta catalyst and then fractionated to make the sample having a uniform in molecular microstructure, was investigated by differential scanning calorimetry (DSC), wide-angle X-ray scattering (WAXD), and atomic force microscopy (AFM). In the DSC curves, one can see clearly the endothermic peaks corresponding to the melting of α-iPP crystals and a group of broad endothermic peaks associated to the melting of the γ-iPP crystals. Wide-angle X-ray diffraction results indicate that both the α and γ modifications can be formed in the copolymer in a wide temperature range. The γ fraction increases first with increasing the crystallization temperature at the expense of its α component, which has been explained according to crystalline structures of iPP in its α and γ forms, and then decreases with increasing crystallization temperature as the crystallization of iPP in its γ phase has been suppressed at high temperatures. The γ-iPP content in the copolymer reaches maximum at the temperature of 130 °C. The in situ X-ray diffraction characterization on the isothermal crystallization process at 130 °C indicates that, as long as the γ-iPP can be detected, it takes always ca. 25% of the overall crystallinity. This leads to the conclusion that α- and γ-iPP crystals grow simultaneously during the crystallization process. The fact that the α and γ phases cannot be distinguished by morphological observation leads to the conclusion that they may intermix within one spherulite.     

Electrospun cellulose acetate/poly(vinylidene fluoride) nanofibrous membrane for polymer lithium-ion batteries

The membranes for gel polymer electrolyte (GPE) for lithium-ion batteries were prepared by electrospinning a blend of poly(vinylidene fluoride) (PVdF) with cellulose acetate (CA). The performances of the prepared membranes and the resulted GPEs were investigated, including scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), X-ray diffraction (XRD), porosity, hydrophilicity, electrolyte uptake, mechanical property, thermal stability, AC impedance measurements, linear sweep voltammetry, and charge–discharge cycle tests. The effect of the ratio of CA to PVdF on the performance of the prepared membranes was considered. It is found that the GPE based on the blended polymer with CA:PVdF =2:8 (in weight) has an outstanding combination property-strength (11.1 MPa), electrolyte uptake (768.2 %), thermal stability (no shrinkage under 80 °C without tension), and ionic conductivity (2.61 × 10^?3 S cm^?1). The Li/GPE/LiCoO₂ battery using this GPE exhibits superior cyclic stability and storage performance at room temperature. Its specific capacity reaches up to 204.15 mAh g^?1, with embedded lithium capacity utilization rate of 74.94 %, which is higher than the other lithium-ion batteries with the same cathode material LiCoO₂ (about 50 %).