Fourier级数子列的可和性

Let H_α0^ω denote the set of functions f(x)∈L_2π such that ω(f,x₀;t)≤ω(t),ω(t) being a given modulus of continuity. Let {n_k} be a set of natural numbers satisfying the condition n_i+1/n_k>q>1, and let A= (α_πk) be a regular summation matrix.     

Mössbauer study of fired Lishan clay and terra-cotta warriors and horses of Qin dynasty (221 B.C.)

The sherds of terra-cotta warriors and horses and Lishan clay were characterized by Mossbauer spectroscopy, XRD, XRF, NAA, thermal and chemical analyses. Lishan clay was testified as the original material of terracotta warriors and horses, the kilning of these warriors and horses was first carried out in an oxidizing atmosphere, and then changed to a predominantly reducing atmosphere. With refiring experiments, the temperatures of Q3 and Q4 samples were determined to be 830±50 and 980±50°C respectively. Transformations of Lishan clay were determined by firing in oxidizing and reducing atmospheres. The Mossbauer parameters of Lishan clay, which was taken after 2–24h firing, were changing up to 12h.     

Lattice disorder in silicon induced by 2.0 MeV Cu+ irradiation

The effect of 2.0 MeV Cu⁺ irradiation on Si(100) crystal has been studied by the Rutherford backscattering/channeling technique. Analysis of the lattice disorder distribution has been performed under 100 direction of tilting off from the target normal: 7°, 30°, and 45° as well as different doses. The lattice disorder distributions in Si(100) have been compared with TRIM'89 simulation. The results show that the lattice disorder distributions in Si(100) under different irradiation angles seem to be in good agreement with TRIM'89 simulation. When the dose increases up to 8.7×10¹⁴ ions/cm², the defect concentration increases leading to the formation of an amorphous layer.     

Mössbauer study of α-Fe2O3 fine particles coated with cobalt and pyridine

The properties of α-Fe₂O₃ line particles coated with cobalt and pyridine have been investigated by means of magnetic measurements and Mössbauer spectra. The Morin transition temperature, T_M for Co-coated α-Fe₂O₃ decreases and that for pyridine-coated α-Fe₂O₃ increases, comparing with the pure α-Fe₂O₃. The angles between (111) axis and the spin of iron ions for these samples have been calculated from the quadrupole splitting.     

相对论二极管电子枪设计的分析解与实验的比较

本文对轴对称场二极管区电子运动所遵循的近似轨迹方程进行数值求解,以此做为设计相对论二极管电子枪的依据,与实验结果相比较,符合较好。     

Crystallization process of Bi(Pb)-Sr-Ca-Cu-O glass

A crystallization study has been carried out for rapidly solidified Bi₂Pb_0.5Sr₂Ca₄Cu₅O_x glass. Glass transition temperature T _g, crystallized superconducting phases and microstructural changes were measured and analysed by differential thermal analysis (DTA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The crystallization mechanism of the three superconducting phases — (2201) 20 K phase, (2212) 80 K phase, and (2223) 110 K phase — has been discussed, and a time-temperature-transformation diagram for the glass has been constructed.     

氨基酸合成方法研究—(XI)N-取代亚氨酸酯与芳醛缩合产物—去氢氨基酸衍生物的构型及其NMR研究

通过~1H NMR、NOE差谱和门控去偶~(13)C NMR等的研究确定了新合成的五对α-去氢氨基酸衍生物的构型,并利用部分弛豫、APT~(13)C NMR二维碳氢相关谱及~(13)C-~(19)F偶合常数等对NMR谱线进行了归属.     

场发射冷阴极微栅孔阵列制备技术

实现了一种采用聚苯乙烯纳米球自组装技术和微机械制造技术加工的场发射阴极用亚微米栅极微孔阵列。设计了一套完整的工艺实验方案,首先采用微球自组装技术获得了亚微米级金属网孔掩膜,然后通过反应离子刻蚀技术获得了亚微米栅极孔阵列,从而实现了集成度高、分布均匀的周期性亚微米孔洞阵列的制备,微孔集成度达到108cm-2。实验研究了氧气刻蚀聚苯乙烯微球的规律。采用金属掩膜,四氟化碳干法刻蚀二氧化硅,获得了深度为500 nm的微孔。实验结果证明该工艺方案是一种获得大面积、均匀分布、集成度高的场发射冷阴极栅孔阵列的有效方法。     

锑掺杂氧化锡粉体的太赫兹透射特性

以SnCl45H2O和SbCl3为原料,采用液相化学共沉淀法制备锑掺杂氧化锡（ATO）粉体。分析了不同Sb掺杂质量分数条件下,ATO粉体的禁带宽度变化,并对材料在0.2~1.6 THz波段的透射时域和频域谱,以及吸收和屏蔽参数进行了对比分析。结果表明,ATO粉体的禁带宽度随着Sb掺杂量的增加先减小后增大;同时,ATO粉体对THz波的吸收系数随着Sb掺杂量的增加先增大后减小,当Sb掺杂质量分数为9%时,ATO的吸收系数在1.25 THz处达到最大值156.5 cm-1,屏蔽效能在1.24~1.60 THz范围内最高达到45.0 dB。     

双路输出超宽谱高功率微波驱动源Tesla变压器

为实现25 GW级双路输出超宽谱高功率微波驱动源的小型化,选择研制了一种与双筒脉冲形成线(Blumlein线)相配一体化的带有开路磁芯的Tesla变压器,作为初级脉冲功率源。进行了Tesla变压器的理论分析,利用简化的磁路模型研究了Tesla变压器初次级线圈电感等电参数的估算方法,给出了Tesla变压器磁芯截面的估算和磁芯制作方法。该Tesla变压器最大输出电压880 kV,充电时间约20 s,耦合系数约0.95,实验结果与理论设计相符。