Critical behavior of a passively mode-locked laser: rational harmonic mode locking

The critical behavior of passive mode locking has been demonstrated in a figure-eight fiber laser that performs rational harmonic mode locking (RHML). On both the repetition rate and the pulse amplitude distribution, the observed pulse trains near the threshold exhibit the same regulations as the rational harmonic mode-locked ones. The theory also shows that there should be a middle status of RHML before achieving normal mode locking. It is important to note that the results provide what we believe to be the first confirmed attempt to address a fundamental question: how does a laser become mode locking with an increase of pump power?     

Characterization of Cr‐doped Sb2Te3 films and their application to phase‐change memory

Phase‐change memory (PCM) is regarded as one of the most promising candidates for the next‐generation nonvolatile memory. Its storage medium, phase‐change material, has attracted continuous exploration. Along the traditional GeTe–Sb₂Te₃ tie line, the binary compound Sb₂Te₃ is a high‐speed phase‐change material matrix. However, the low crystallization temperature prevents its practical application in PCM. Here, Cr is doped into Sb₂Te₃, called Cr–Sb₂Te₃ (CST), to improve the thermal stability. We find that, with increase of the Cr concentration, grains are obviously refined. However, all the CST films exhibit a single hexagonal phase as Sb₂Te₃ without phase separation. Also, the Cr helps to inhibit oxidation of Sb atoms. For the selected film CST_10.5, the resistance ratio between amorphous and crystalline states is more than two orders of magnitude; the temperature for 10‐year data retention is 120.8 °C, which indicates better thermal stability than GST and pure Sb₂Te₃. PCM cells based on CST_10.5 present small threshold current/voltage (4 μA/0.67 V). In addition, the cell can be operated by a low SET/RESET voltage pulse (1.1 V/2.4 V) with 50 ns width. Thus, Cr–Sb₂Te₃ with suitable composition is a promising novel phase‐change material used for PCM with high speed and good thermal stability performances. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Simple Nd:YAG laser generates vector and vortex beam

We report a simple Nd:YAG laser that emits radially polarized beam with helical wavefront. The laser cavity consists of a piece of laser crystal and a plane output coupler, and there is no additional polarization component inside it. The pump light is converted into annular profile through de-focal coupling into a multi-mode fiber. For the continuous-wave(CW) operation, the laser emits radially polarized vortex beam, and it is observed that the helical wavefront of the laser beam is switched from right handedness to left handedness when the output coupler is tilted slightly. For the Q-switched operation under the insertion of a Cr4t:YAG saturable absorber inside the cavity, we obtain radially polarized outputs with left-handedness helical wavefront. By tilting the laser crystal slightly, the laser output switches to azimuthal polarization at pump power larger than 4.5 W and left-handedness helical wavefront of laser beam is preserved.     

Pulsed microwave-driven argon plasma jet with distinctive plume patterns resonantly excited by surface plasmon polaritons

Atmospheric lower-power pulsed microwave argon cold plasma jets are obtained by using coaxial transmission line resonators in ambient air.The plasma jet plumes are generated at the end of a metal wire placed in the middle of the dielectric tubes.The electromagnetic model analyses and simulation results suggest that the discharges are excited resonantly by the enhanced electric field of surface plasmon polaritons.Moreover,for conquering the defect of atmospheric argon filamentation discharges excited by 2.45-GHz of continued microwave,the distinctive patterns of the plasma jet plumes can be maintained by applying different gas flow rates of argon gas,frequencies of pulsed modulator,duty cycles of pulsed microwave,peak values of input microwave power,and even by using different materials of dielectric tubes.In addition,the emission spectrum,the plume temperature,and other plasma parameters are measured,which shows that the proposed pulsed microwave plasma jets can be adjusted for plasma biomedical applications.     

Determination of carbapenems in water samples by UHPLC–MS/MS

A rapid and reliable method for the detection of five carbapenems (biapenem, imipenem, doripenem, meropenem, and faropenem) in water was developed and validated. After acidification of water samples with acetic acid, carbapenems were isolated using a Bond Elut PPL cartridge. The target compounds were separated using ultra high performance liquid chromatography with a chromatographic run time of 5 min and detected on a triple quadrupole mass spectrometer operated in positive electrospray ionization and multiple reaction monitoring mode. Mean recoveries were in the range of 76.6–106.5%, with satisfactory intraday and interday relative standard deviations lower than 10.0 and 10.8%, respectively. The limits of detection and quantification were in the ranges of 0.05–0.2 µg/L and 0.1–0.5 µg/L, respectively, depending on the analyte. The proposed method was applied to the analysis of river samples and wastewater samples from swine farms, and no carbapenems were detected in the collected samples.