丙烯直接环氧化Cu基催化剂的研究进展与挑战

作为一种重要的化工原料,环氧丙烷年产量近千万吨,然而目前工业上制备环氧丙烷的方法仍然面临着成本高、副产物多以及污染严重等问题。直接氧气氧化法进行丙烯环氧化因为具有原子经济、环保等优点受到了越来越多的关注。但是,催化过程中丙烯的α-H和环氧丙烷都具有很高的活性,使得在高转化率的条件下提升环氧丙烷选择性成为一个巨大的挑战。研究者们发现相较于其他币族金属,Cu基催化剂表现出更优异的丙烯直接环氧化反应性能。本综述总结梳理了近年来关于Cu基催化剂催化丙烯直接环氧化反应的研究成果,聚焦于Cu基催化剂改性方法,并对Cu基催化剂依然存在的问题和挑战进行深入探讨。     

Cu Nanoparticles Embedded in N‐Doped Carbon Materials for Oxygen Reduction Reaction

Development of eco‐friendly, cost‐effective, and high‐performance electrocatalysts to replace precious metal platinum for oxygen reduction reaction (ORR) has received increasing attention. Herein, we adopt a facile one‐pot strategy to embed Cu nanoparticles onto N‐doped carbon‐graphene (Cu@NC‐700). The Cu@NC‐700 exhibits robust and efficient ORR catalysis with positive half‐wave potential (~0.86 V vs. RHE) and low Tafel slope (33.9 mV?dec^–1) in 0.1 M KOH solution. Meanwhile, it manifests remarkable electrochemical stability, and strong tolerance to methanol crossover and carbon monoxide poisoning. The synergistic effect between Cu‐N‐C sites, Cu nanoparticles, and N‐doped carbon support speeds up ORR electrocatalysis.     

Boosting Photocatalytic Oxygen Evolution: Purposely Constructing Direct Z-Scheme Photoanode by Modulating the Interface Electric Field

Ti-Fe₂O₃ photoanode has received widespread attention in photoelectrochemical(PEC) water spilling because of its optimized oxidative and reductive capability of composites catalyst. However, its low efficiency could limit its development. Herein, in order to improve the efficiency of PEC water spilling, the all-solid-state direct Z-scheme Ti-ZnFe₂O₄/Ti-Fe₂O₃(TZFO/Ti-Fe₂O₃) nanorod arrays composited with the ideal energy band structure are synthesized by modulating the Fermi level of TZFO for PEC water splitting. The photophysical methods in this work, including the Kelvin probe measurement and transient photovoltage spectroscopy(TPV) measurement, are applied to explore the migration behavior of electric charges at the enhanced interface electric field. Finally, the Z-scheme charge transfer mechanism of TZFO/Ti-Fe₂O₃ photoanode is proved successfully. Benefiting from the desirable charge transfer at interface electric field, the TZFO/Ti-Fe₂O₃ exhibits the outstanding photocatalytic oxygen evolution reaction(OER) performance, and the photocurrent of 60TZFO/Ti-Fe₂O₃ photoanode reaches 2.16 mA/cm² at 1.23 V vs. reversible hydrogen electrode(RHE), which is three times higher than that of pure Ti-Fe₂O₃ photoanode. This work provides a facile approach of modulating interface electric field to optimize the Z-scheme charge-transfer process.     

Recent Advance of Tellurium for Biomedical Applications

Tellurium(Te) nanomaterials have aroused a wide interest in semiconductor, thermoelectric, piezoelectric, as well as biomedical applications. The last decades of reports indicated a major nanostructure of one-dimensional (1D) Te on account of its inherent structural anisotropy. Two-dimenional(2D) Te has been newly developed and drawn a lot of interests recently. This review presents the intrinsic biological potential of Te-based nanomaterials and summarizes their up-to-date advance in phototherapy and reactive oxygen species(ROS)-related applications in the biomedical field.     

Alloyed Crystalline CdSe1-xSx Semiconductive Nanomaterials – A Solid State 113Cd NMR Study

Solid-state NMR analysis on wurtzite alloyed CdSe_1−xS_x crystalline nanoparticles and nanobelts provides evidence that the ¹¹³Cd NMR chemical shift is not affected by the varying sizes of nanoparticles, but is sensitive to the S/Se anion molar ratios. A linear correlation is observed between ¹¹³Cd NMR chemical shifts and the sulfur component for the alloyed CdSe_1−xS_x (0<x<1) system both in nanoparticles and nanobelts (δ_Cd=169.71⋅X_S+529.21). Based on this correlation, a rapid and applied approach has been developed to determine the composition of the alloyed nanoscalar materials utilizing ¹¹³Cd NMR spectroscopy. The observed results from this system confirm that one can use ¹¹³Cd NMR spectroscopy not only to determine the composition but also the phase separation of nanomaterial semiconductors without destruction of the sample structures. In addition, some observed correlations are discussed in detail.     

Regiodivergent Intramolecular Nucleophilic Addition of Ketimines for the Diverse Synthesis of Azacycles

Azacycles such as indoles and tetrahydroquinolines are privileged structures in drug development. Reported here is an unprecedented regiodivergent intramolecular nucleophilic addition reaction of imines as a flexible approach to access N‐functionalized indoles and tetrahydroquinolines, by the control of reaction at the N‐terminus and C‐terminus, respectively. Using ketimines derived from 2‐(2‐nitroethyl)anilines with isatins or α‐ketoesters, the regioselective N‐attack reaction gives N‐functionalized indoles, while the catalytic enantioselective C‐attack reaction affords chiral tetrahydroquinolines featuring an α‐tetrasubstituted stereocenter. Mechanistic studies reveal that hydrogen‐bonding interactions may greatly facilitate such unusual N‐attack reactions of imines. The utility of this protocol is highlighted by the catalytic enantioselective formal synthesis of (?)‐psychotrimine, and the construction of various fused aza‐heterocycles.     

NaGaS2: An Elusive Layered Compound with Dynamic Water Absorption and Wide‐Ranging Ion‐Exchange Properties

Most ternary sulfides belonging to the MGaS₂ structure‐type have been known for many years and are well‐characterized. Surprisingly, there have been no reports of the NaGaS₂ composition, which contains Na, a monovalent cation slightly larger in size than Li, found in LiGaS₂, a compound known for its non‐linear optical properties. Now it is demonstrated for the first time that the unique reversible water absorption in NaGaS₂ has resulted in its absence from previous reports owing to difficulties encountered when characterizing this compound by SC XRD. The layered structure of this compound coupled with uniquely easy migration of water molecules between the layers allows for ion exchange with 3d and 5f metal cations. Some cations, for example, Ni²⁺, facilitate exfoliation of the layers, providing a facile synthetic route to a new class of 2D chalcogenide materials and furthermore demonstrating that NaGaS₂ can readily uptake uranyl species from aqueous solutions.     

Divergent Biomimetic Total Syntheses of Ganocins A–C,Ganocochlearins C and D,and Cochlearol T

A divergent synthetic approach to six Ganoderma meroterpenoids, namely ganocins A–C, ganocochlearins C and D, and cochlearol T, has been developed for the first time. This synthetic route features a two‐phase strategy which includes early‐stage rapid construction of a common planar tricyclic intermediate followed by highly selective late‐stage transformations into various Ganoderma meroterpenoids. Key to the strategy are a bioinspired intramolecular hetero‐Diels–Alder reaction and Stahl‐type oxidative aromatization, allowing efficient formation of the common tricyclic phenol intermediate. A nucleophilic dearomatization of the phenol unit, combined with a regioselective 1,4‐reduction of the resulting dienone, enabled rapid access to ganocins B and C. Additionally, site‐selective Mukaiyama hydration, followed by an intramolecular oxa‐Michael addition/triflation cascade, served as a key strategic element in the chemical synthesis of ganocin A.     

Chitosan‐modified graphene oxide as a modifier for improving the structure and performance of forward osmosis membranes

Chitosan (CS) with good hydrophilicity and charged property was used to modify graphene oxide (GO), the obtained GO‐CS was used as a novel modifier to fabricate thin film composite forward osmosis (FO) membranes. The results revealed that the amino groups on CS reacted with carboxyl groups on GO, and the lamellar structure of the GO nanosheets was peeled off by CS, resulting in the reducing of their thicknesses. The GO‐CS improved the hydrophilicity of polyethersulfone (PES) substrate, and their contact angles decreased to 64° with the addition of GO‐CS in the substrate. GO‐CS also increased the porosity of the substrate and surface roughness of FO membrane, thereby optimizing the water flux and reverse salt flux of FO membrane. The average water flux of the FO membrane reached the optimal flux of 21.34 L/(m² h) when GO‐CS addition was 0.5 wt%, and further addition of GO‐CS to the substrate would decrease the water flux of FO membrane, and the reverse salt flux also decreased to the lowest value of 2.26 g/(m² h). However, the salt rejection of the membrane increased from 91.4% to 95.1% when GO‐CS addition increased from 0.5 to 1.0 wt% under FO mode using 1 mol/L sodium chloride (NaCl) solution as draw solution (DS). In addition, high osmotic pressure favored water permeation, and at the same concentration of DS, magnesium chloride (MgCl₂) exhibited better properties than NaCl. These results all suggested that GO‐CS was a good modifier to fabricate FO membrane, and MgCl₂ was a good DS candidate.     

pH计检定仪期间核查方法

介绍pH计检定仪的4种期间核查方法:传递比较法、多台对比法、留样测量法、实验室间比对法。传递比较法能直接反应pH计检定仪的变化,适用于已建立pH计检定仪检定装置的单位;多台对比法与留样测量法方便、快捷,可操作性强,适合大多数单位进行pH计检定仪的期间核查;实验室间比对法对设备要求较低,但需要协调的单位较多,周期较长,费用较高,实用性差。