Na离子和Cl离子引起He原子直接多重电离过程的研究

利用2～8 MeV的Naq+、Clq+(q=2,3,4,5)轰击氦原子,对碰撞的直接多重电离过程进行研究.实验采用反冲离子-散射离子飞行时间符合技术,通过反冲离子飞行时间谱区分不同价态反冲离子;利用静电偏转和位置灵敏探测技术区分不同电荷态散射离子;结合CAMAC-PC多参数获取系统得到一定价态散射离子所对应的反冲离子电荷态分布谱;经分析该谱得到直接多重电离截面与直接单电离截面之比R21.讨论了R21随入射离子速度和电荷态的变化关系.     

The calculation of neutron self-shielding factors of a group of isolated resonances

The resonance neutron self-shielding factor, G _res, is required in neutron metrology and activation data analysis. In a previous paper, the authors have shown that a dimensionless variable can be introduced which converts the dependence of G _res on the physical and nuclear properties of the material samples into an universal curve, valid for the isolated resonances of any nuclide. This work presents a methodology based on the universal curve, which enables to calculate G _res for a group of isolated resonances by weighting its individual contributions. A good agreement was reached with results calculated by the MCNP code and with experimental values for Mo foils and wires. This revised version was published online in July 2006 with corrections to the Cover Date.     

A New Bibenzyl Glycoside from Dendrobium moniliforme

A new bibenzyl glycoside has been isolated from the stems of Dendrobium moniliforme (L.) Sw.(Orchidaceas).Its structure has been identified on the basis of spectroscopic and chemical methods.     

Enhancement of Overall Photovoltaic Efficiency by Changing the Position of the Attaching Group -RSO3- on the Hemicyanine Dye Molecules

A new photoresponsive D-π-A dye, mPS, has been designed and synthesized.Compared to the parent dye PS, IPCE values in the region from 400 nm to 560 nm was greatly improved upon changing the attaching group from the p- position to the o- position of the π-conjugation bridge. A solar cell based on mPS generated a remarkably high overall yield η of 5.4% under irradiation of 80.0 mW cm^-2 white light from a Xe lamp, Compared with PS, the overall yield η increased by 64%.     

一种新颖的超结构光纤Bragg光栅梳状滤波器的设计

报道一种新颖的用于多波长光纤激光器的超结构光纤Bragg光栅（SFBG）梳状滤波器，其突出特点是仅由单个光栅构成、折射率调制和局部啁啾富于变化、反射峰均匀性好、窄带宽和标准的信道间隔.采用基于LP算法的IS光纤光栅设计技术，将整体加窗切趾法改进为各信道独立加窗切趾，成功地设计出所需的SFBG，同时对SFBG的制作技术也进行了探讨.用传输矩阵法分析反射谱、时延曲线和群时延抖动.结果表明，所设计的SFBG满足各项设计指标要求，在DWDM系统中，这种新颖的SFBG可望成为用于多波长光纤激光器的最理想的高性 能梳 关键词： 超结构光纤Bragg光栅 光栅设计 梳状滤波器     

GM(1,1)改进模型及其应用

根据 GM( 1 ,1 )灰色模型的指数特性 ,通过在区间上求积分给出了关于背景值的一个比较确切的计算公式 ,讨论了由此建立的 GM( 1 ,1 )改进模型的适用范围和预测精度 .结果表明改进模型比原 GM( 1 ,1 )模型适用性要强、模拟和预测精度要高 ,不仅适用于低增长序列、也适用于高增长序列 ,不仅适用于短期预测 ,同样也适用于中、长期预测     

HBTMPTP与伯胺N1923对稀土元素(Ⅲ)的协同萃取

研究了二（2，4，4-三甲基戊基）单硫代膦酸（HBTMPTP，HL）和伯胺N1923的正己烷溶液从硫酸介质中对稀土元素（Ⅲ）的协同萃取．并以La（Ⅲ）为例，用斜率法、恒摩尔法和饱和法确定了协萃配合物的组成为（RNH3）3L2La（SO4）2，计算了协萃配合物的生成常数及热力学函数，观测了协萃配合物的IR谱．     

Working group report: Flavor physics and model building

This is the report of flavor physics and model building working group at WHEPP-9. While activites in flavor physics have been mainly focused on B-physics, those in model building have been primarily devoted to neutrino physics. We present summary of working group discussions carried out during the workshop in the above fields, and also briefly review the progress made in some projects subsequently.     

Study on effects of substrate temperature on growth and structure of alignment carbon nanotubes in plasma-enhanced hot filament chemical vapor deposition system

Alignment carbon nanotubes (ACNTs) were synthesized on silicon substrate coated with Ni catalyst film and Ta buffer layer by plasma-enhanced hot filament chemical vapor deposition using CH₄, NH₃, and H₂ as the reaction gas, and they were investigated by scanning electron microscopy and transmission electron microscopy. It is found that the diameter of the bamboo-structured ACNTs is increased from 62 to 177 nm when the substrate temperature was changed from 626 to 756 °C. Their growth rate is enhanced by the substrate temperature in a range of 626-683 °C and it is reversely reduced with the substrate temperature after the substrate temperature is over 683 °C. Beginning with wetting phenomenon, the effects of the substrate temperature on the structure and growth rate of the ACNTs are analyzed.     

Effects of Post-Thermal Treatment on Quality of SiC Grown by PVT Method

We report the effects of post-thermal treatment on the quality of 2-inch 6H-SiC wafer cut from a crystal boule grown by physical vapour transportation method. The full widths at half maximum of x-ray diffraction rocking curves measured on sites across the 2-inch wafer become narrower, indicating the quality improvement after a three-step post-thermal treatment. It is found that the most common defects such as micropipes and inclusions can be significantly reduced after the treatment. Our results show that the post-thermal treatment is an effective route to improve the quality of SiC single crystals.