STRUCTURE CHARACTERIZATION AND CATALYTICACTIVITY TEST OF Ni(II) COMPLEXES CONTAINING2-(DIPHENYLPHOSPHINOAMINO) PYRIDINE(PAP)

IntroductionIn1962,N.V.Kutepow'SgroupfirstusedcomplexesofFe,CoandNiascatalyststocatalyzecarboXylationofethanoltopreparepropanoicacidanditsderivants.Thereactionpressurewashighandtheyieldwaslow.LateronPaulalsandhiscolleagueusedabC13andiodineascatalyst,which…     

核糖核酸酶A在DAB-环乙烷溶液中的活性和构象

The activity and conformation of ribonuclerse A (RNaseA) solubilized in cyclohexane via dodecylammonium butyrate(DAB) reverse micelles were investigated. The activity of RNaseA was studied using the cytidine 2’,3’ -phosphate as the substrate, and it was found that kcat increases significantly with respect to that in water attended by an increased Km•FT-IR spectra of RNaseA in reverse micellar solution were investigated as a function of w0(= [H2O]/ [DAB]), and it was noted that the structure of RNaseA became losser in reverse micelles campared to that in aqueous solution. The relation between activity and conformation was discussed.     

Separation of Dyes from Aqueous Solutions by Paper Adsorption

Separation of the dyes methyl violet, methylene blue, and congo red from aqueous solutions by paper capillary permeation adsorption method was studied using paper. Nearly 100% of the investigated dyes could be separated under the optimum conditions. The effect of pH on the separation efficiency was studied in particular. At pH 5–9, 1.3–11, and 7–11, the maximum separation was achieved for methyl violet, methylene blue and congo red, respectively. The effects of dye concentration and some foreign ions on the separatability were examined. Moreover, the selective separation of some dyes was attempted by elution with chemical reagents.     

Binding sites of nitrogenase: kinetic and theoretical studies of cyanide binding to extracted FeMo-cofactor derivatives

The first kinetic study of a substrate (CN(-)) binding to the isolated active site (extracted FeMo-cofactor) of nitrogenase is described. The kinetics of the reactions between CN(-) and various derivatives of extracted FeMo-cofactor [FeMoco-L; where L is bound to Mo, and is NMF, Bu(t)NC, or imidazole (ImH)] have been followed using a stopped-flow, sequential-mix method in which the course of the reaction is followed indirectly, by monitoring the change in the rate of the reaction of the cofactor with PhS(-). The kinetic results, together with DFT calculations, indicate that the initial site of CN(-) binding to FeMoco-L is controlled by a combination of the electron-richness of the cluster core and lability of the Mo-L bond. Ultimately, the reactions between FeMoco-L and CN(-) involve displacement of L and binding of CN(-) to Mo. These reactions occur with a variety of rates and rate laws dependent on the nature of L. For FeMoco-NMF, the reaction with CN(-) is complete within the dead-time of the apparatus (ca. 4 ms), while with FeMoco-CNBu(t) the reaction is much slower and exhibits first order dependences on the concentrations of both FeMoco-CNBu(t) and CN(-) (k = 2.5 +/- 0.5 x 10(4) dm(3) mol(-1) s(-1)). The reaction of FeMoco-ImH with CN(-) occurs at a rate which exhibits a first order dependence on FeMoco-ImH but is independent of the concentration of CN(-) (k = 50 +/- 10 s(-1)). The results are interpreted in terms of CN(-) binding directly to the Mo site for FeMoco-NMF and FeMoco-ImH, but with FeMoco-CNBu(t) initial binding at an Fe site is followed by movement of CN(-) to Mo. Complementary DFT calculations are consistent with this interpretation, indicating that, in FeMoco-L, the Mo-L bond is stronger for L = ImH than for L = CNBu(t) and the binding of CN(-) to Mo is stronger than to any Fe atom in the cofactor.     

Reversed stereoselectivity in iodohydroxylation of allenyl sulfides. An efficient synthesis of (Z)-3-organosulfur-2-iodo-2-propenols

[reaction: see text] It is observed that the iodohydroxylation of 1,2-allenyl sulfides with I(2) and water in aqueous acetone showed Z-selectivity, which is opposite to that of the iodohydroxylation of 1,2-allenyl sulfoxides.     

An Efficient Route to Prepare Metal Organosols by Phase Transfer Procedure

Silver and gold organosols are easily prepared by transferring nanoparticles from aqueous phase into isooctane with high efficiency (＞90%). Concentrations of sodium oleate and magnesium chloride have crucial effects on the transfer efficiency. Based on the UV-visible absorption spectra, TEM micrographs of nanoparticles, as well as molecular modeling calculation about the adsorption conformation of sodium oleate molecules, a possible phase transfer mechanism is proposed.     

Heterolytic cleavage of a beta-phosphatoxyalkyl radical resulting in phosphate migration or radical cation formation as a function of solvent polarity

[formula: see text] The 2-(diethylphosphatoxy)-2-(p-methoxyphenyl)-1,1-dimethylethyl radical (1) reacted to give the benzylic radical product from phosphate migration or a radical cation (or a mixture of the two) as a function of solvent. Smooth acceleration in rates of reactions of 1 in solvents of increasing polarity and consistent entropies of activation indicate that radical 1 reacts by common mechanism irrespective of the final products formed, specifically by initial heterolysis to a radical cation-phosphate anion pair.     

Kinetics of zinc and cadmium dissociation of metallothionein in the presence of chelating agents

The dissociation kinetics of metal ions from native metallothionein (Cd₅Zn₂-MT) of rat liver has been studied in the presence of external ligands including amino acids, peptide and polyamino polycarboxylic acids at 25°C. The study shows that the solution pH affects the metal dissociation process. Different ligands present different multiphasic kinetics. The possible mechanism of metal dissociation from metallothionein has been proposed.     

羟丙基醋酸纤维素的合成及其膜的反渗透性

研究了羟丙基纤维素和羟丙基醋酸纤维素的合成。制备羟丙基纤维素的较佳反应温度为40℃左右和2小时或稍长,羟丙基含量随环氧丙烷浓度的增加而增加。在制备羟丙基醋酸纤维素时,随羟丙基含量的增加,所需醋化和水解的时间减少。以甘油-正丙醇或磷酸为添加剂,丙酮为溶剂经30～60s蒸发后制得了羟丙基醋酸纤维素反渗透膜。后者在20kg/cm~2下对氯化钠脱盐率可达95～98％,水通量1.0～2.1mL/cm~2·h,其使用温度上限比醋酸纤维素反渗透膜提高10℃以上。     

Synthesis and characterization of diametrically substituted tetra-O-n-butylcalix[4]arene ligands and their chelated complexes of titanium,molybdenum, and palladium

The ligation properties of three new upper-rim-substituted calix[4]arene ligands, 5,17-bis(hydroxymethyl)-tetra-n-butoxycalix[4]arene ((HOCH2)2-nBu4Clx, 7), 5,17-bis((diphenylphosphinito)methoxy)-tetra-n-butoxycalix[4]arene ((PPh2OCH2)2-nBu4Clx, 8), and 5,17-bis((diphenylphosphino)methyl)-tetra-n-butoxycalix[4]arene ((PPh2CH2)2-nBu4Clx, 10) are reported herein. The newly prepared compounds differ from previously reported diametrically substituted calix[4]arene derivatives in that the lower-rim substituent was n-butyl. The presence of this lower-rim substituent did not reduce the inherent crystallinity of these complexes as purification of all materials occurred via simple crystallizations. The key precursor for the syntheses of 8 and 10 was 7, acquisition of which occurred in six steps starting from tetra-tert-butylcalix[4]arene, 1. Calix[4]arene derivatives include, tetra-n-butoxycalix[4]arene (nBu4Clx, 3), 5,11,17,23-tetrabromo-tetra-n-butoxycalix[4]arene (Br4-nBu4Clx, 4), 5,17-dibromo-tetra-n-butoxycalix[4]arene (Br2-nBu4Clx, 5), 5,17-bis(formyl)-tetra-n-butoxycalix[4]arene ((CHO)2-nBu4Clx, 6), and 5,17-bis(chloromethyl)-tetra-n-butoxycalix[4]arene ((ClCH2)2-nBu4Clx, 9), all of which were synthesized using modifications of existing procedures. Characterization of all compounds occurred, when possible, using 1H, 13C, and 31P NMR, elemental analyses, FAB-MS, ESI-MS, FT-IR, and X-ray crystallography. The solid-state structures of all calix[4]arene intermediates and ligands showed that the annulus adopted the pinched-cone conformation in which the average C(5)...C(17) intraannular separation was 4.5 +/- 0.4 A. Reaction of 7 with CpTiMe3 yielded the cis-chelate, CpTi(Me)[(OCH2)2-nBu4Clx] (11), quantitatively. Data obtained using ESI-MS (positive-ion mode) confirmed the monomer formulation showed above, and 1H NMR spectra provided sufficient information to deduce the nature of the Ti coordination sphere. Reaction of 8 with cis-Cl2Pd(NCPh)2 in refluxing benzene afforded cis-Cl2Pd[(PPh2OCH2)2-nBu4Clx] (12) in good yields. The monomeric identity of this compound was verified by both X-ray crystallography and positive-ion ESI-MS. The cis-bidentate calix[4]arene ligand did not undergo any noticeable contortion upon chelation of the PdCl2 fragment. Acid-promoted decomposition of 12 occurred in the presence of adventitious HCl and gaseous HCl, and the products of this decomposition were 9 and [mu2-ClPd(PPh2OH)(PPh2O)]2. In addition, chelates of 8 that contained Mo(CO)3L (L = NCMe (14a), NCEt (14b), and CO (14c)) showed that the mode of coordination was relatively insensitive to the identity of the metal. X-ray crystallography afforded views of the solid-state structures of 14b,c and, like 12, showed that the Mo(CO)3L fragment resided above the pinched-cone of the calix[4]arene. 1H NMR revealed that C-H/pi interactions existed between L (14a,b) and a phenyl ring of the coordinated phosphinite. Finally, the bis(diphenylphosphine)calix[4]arene ligand (10) readily coordinated the Mo(CO)3L species, but the reaction did not go to completion, as evidenced by 1H NMR, even after a 5 day reaction time. Data suggest that the product is similar to that observed for 12 and 14, but the incomplete reaction complicated attempts to obtain pure material and prohibited definitive assignment of the coordination array.