Ameliorating the interfacial issues of all-solid-state lithium metal batteries by constructing polymer/inorganic composite electrolyte

Lithium metal is one of the most promising anodes for next-generation batteries due to its high capacity and low reduction potential.However,the notorious Li de...     

Sizes,Components, Crystalline Structure,and Thermal Properties of Starches from Sweet Potato Varieties Originating from Different Countries

Sweet potato is a root tuber crop and an important starch source. There are hundreds of sweet potato varieties planted widely in the world. Starches from varieties with different genotype types and originating from different countries have not been compared for their physicochemical properties. In the research, starches from 44 sweet potato varieties originating from 15 countries but planted in the same growing conditions were investigated for their physicochemical properties to reveal the similarities and differences in varieties. The results showed that the 44 starches had granule size (D[4,3]) from 8.01 to 15.30 μm. Starches had different iodine absorption properties with OD680 from 0.259 to 0.382 and OD620/550 from 1.142 to 1.237. The 44 starches had apparent amylose content from 19.2% to 29.2% and true amylose content from 14.2% to 20.2%. The starches exhibited A-, C_A-, C_C-, or C_B-type X-ray diffraction patterns. The thermograms of 44 starches exhibited one-, two-, or three-peak curves, leading to a significantly different gelatinization temperature range from 13.1 to 29.2 °C. The significantly different starch properties divide the 44 sweet potato varieties into different groups due to their different genotype backgrounds. The research offers references for the utilization of sweet potato germplasm.     

气相传输平衡技术制备LiGaO2薄膜

为获得与GaN薄膜晶格失配小的衬底材料,报道了利用气相传输平衡技术(VTE)在(100)-βGa2O3单晶衬底上制备高度[001]取向LiGaO2薄膜的方法。经过X射线衍射分析表明得到的薄膜是由单相LiGaO2组成。利用扫描电镜(SEM)观察表面形貌,发现经气相传输平衡技术处理得到的薄膜表面形貌主要受温度的影响,表面晶粒尺寸随温度上升而增大。而X射线衍射测试表明随着温度上升,所得到的薄膜也从多晶向单晶化转变。在经过退火处理后,通过观察吸收谱发现LiGaO2薄膜中产生色心,并且色心的种类与温度有关。表明可以通过气相传输平衡技术技术,在远低于LiGaO2熔点的温度制备外延GaN用(001)LiGaO2∥(100)β-Ga2O3复合衬底。     

Dielectron widths of the Gamma(1S,2S,3S) resonances

We determine the dielectron widths of the Gamma(1S), Gamma(2S), and Gamma(3S) resonances with better than 2% precision by integrating the cross section of e+e- -->Gamma over the e+e- center-of-mass energy. Using e+e- energy scans of the Gamma resonances at the Cornell Electron Storage Ring and measuring Gamma production with the CLEO detector, we find dielectron widths of 1.252+/-0.004(sigma(stat))+/-0.019(sigma(syst)) keV, 0.581+/-0.004+/-0.009 keV, and 0.413+/-0.004+/-0.006 keV for the Gamma(1S), Gamma(2S), and Gamma(3S), respectively.     

Investigation of crystallographic sites of Eu in La2BaZnO5 by site-selective laser-excitation spectroscopy

La₂BaZnO₅:Eu³⁺ (0.05 mol%) was prepared by a solid-state reaction at high temperature. X-ray powder diffraction analysis confirmed the formation of single phase La₂BaZnO₅. Luminescence properties of La₂BaZnO₅:Eu³⁺ are investigated by site-selective laser-excitation and emission spectroscopy at 18 K. Two different crystallographic sites for Eu³⁺ corresponding to the La³⁺ and Ba²⁺ sites are identified from the ⁷F₀→⁵D₀ excitation spectra obtained by monitoring the ⁵D₀→⁷F_J (J=1, 2, …, 6) emissions. It is found that Eu³⁺ substituted for the Ba²⁺ ion experiences stronger crystal-field strength than Eu³⁺ substituted for the La³⁺ ion. Energy transfer between the two crystallographic Eu³⁺ centers is investigated by luminescence decay curves at 18 K.     

Surface plasmon resonance sensors based on Ag-metalized nanolayer in microstructured optical fibers

Surface plasmon resonance sensors based on Ag-metalized nanolayer in microstructured optical fibers are theoretically analyzed by using finite element method (FEM). In our simulations we use Drude-Lorentz model to describe the metal dielectric constant. The numerical results show that the sensitivity of Ag-metalized SPR sensor could reach 1167 nm/RIU and corresponding resolution is 8.57×10⁻⁵ RIU. Compared to conventional Au-metalized SPR sensors the performance of our device is obviously better.     

纳米结构泡沫金冲击响应的分子动力学模拟

采用分子动力学计算程序对纳米结构泡沫金(Au)的冲击响应进行了模拟,得到了不同疏松度条件下泡沫Au的冲击压缩特性。通过获取不同势函数条件下实密Au的冲击Hugoniot关系以及泡沫结构稳定性测试选取适合描述Au泡沫冲击过程中原子的相互作用势。采用密堆积球壳的方式建立泡沫Au的初始构型。通过改变空心球壳的尺寸得到不同疏松度的稳定的泡沫Au结构。对泡沫Au的冲击过程进行分子动力学模拟,获得了不同疏松度泡沫Au在不同冲击压缩强度下的热力学状态参数。将模拟结果与已有的状态方程数据库以及疏松物质冲击压缩模型进行比较,结果表明,计算和理论模型给出的结果仍然存在明显的差异性,亟需通过进一步实验研究来验证模拟计算和理论模型结果的可靠性。     

QCD equation of state for heavy ion collisions

In this work, we calculate the equation of state(EoS) of quark gluon-plasma(QGP) using the CornwallJackiw-Tomboulis(CJT) effective action. We get the quark propagator by using the rank-1 separable model within the framework of the Dyson-Schwinger equations(DSEs). The results from CJT effective action are compared with lattice QCD data. We find that, when μ is small, our results generally fit the lattice QCD data when TT_c,but show deviations at and below T_c. It can be concluded that the EoS of CJT is reliable when TT_c. Then,by adopting the hydrodynamic code UVH2+1, we compare the CJT results of the multiplicity and elliptic flow v2 with the PHENIX data and the results from the original EoS in UVH2+1. While the CJT results of multiplicities generally match the original UVH2+1 results and fit the experimental data, the CJT results of v2 are slightly larger than the original UVH2+1 results for centralities smaller than 40% and smaller than the original UVH2+1 results for higher centralities.     

Theory of modified thermally stimulated current and direct determination of trap level distribution

In order to investigate the trap level distribution in polymer films, a new method is proposed based on modified thermally stimulated current (TSC) theory and numerical calculation of the TSC measurement. In this method, a new function is defined to weight the contribution of every trap level to the external current. The demarcation energy is used to study the trap emptying process. The modified TSC theory shows that only the electrons with trap levels very close to the demarcation energy can significantly contribute to the external circuit at any instant temperature. Based on this method, the trap level distribution of the DuPont original polyimide film 100HN and nanocomposite polyimide film 100CR are investigated as an application example. The effectiveness of the method is confirmed by the experiments. The experimental results show that the trap level density in the 100CR PI films is about six times larger than that in the 100HN PI films through the investigated trap level ranges 06–1.3 eV. The increased traps in 100CR should be introduced by nanofillers, probably come from the interfaces formed between nanofillers and the polymer matrix.     

用于实时溅射深度测量的新型Grimm辉光放电光源的设计

采用辉光放电光谱仪进行物质表面深度分析时,样品溅射深度是重要的分析信息.本文设计了一种新型Grimm辉光放电光源,此光源与激光位移测距传感器构成的测昔系统可对样品溅射深度进行实时测量,并保证了良好的辉光溅射效果和分辨多层结构及界面的能力.采用激光三角测量技术,在辉光光谱分析的同时对溅射深度进行实时测量,能够有效地解决传统深度分析方法中步骤繁琐以及对深度估算不准确等问题.本光源采用光纤将辉光光谱信号从光源传至多道分光光电检测系统,在结构上首次实现了元素光谱信号和溅射深度信号的实时采集及基于时间的同步分析,对标准样品得到了理想的实时溅射深度测量曲线.本文详细介绍了此新型辉光放电光源的设计思路和工作原理.本辉光放电光源具有良好的深度分辨率,在30 mA,900 V,20 min的溅射条件下,对铁基和铜基样品的溅射速率分别约为10和55 nm·s-1,文中给出了样品的溅射坑表面形貌图和溅射坑显微照片.对中低合金钢标准样品进行了分析精密度实验,分析精度良好,其中C,Cu,Al,Ni,Mo,Mn,V元素相对标准偏差(RSD)均小于1.7%.Cr和Si元素RSD小于2.6%,给出了实测数据.