选择性氧化含氰基的对硝基苯硫醚

选择性氧化含氰基的对硝基苯硫醚岳国仁，王建华，张正（南京大学化学系南京２１０００８）关键词含氰基硫醚，选择性氧化，四水合过硼酸钠据报道［１］对硝基苯磺酰基乙腈的合成，反应时间长，可采用四水合过硼酸钠（ＮａＢＯ３·４Ｈ２Ｏ）作为氧化剂，受到重视［２，３...     

固体磷酸催化剂的活性相

研究了固体磷酸催化剂活性与其自由磷酸聚合态及磷酸硅晶型的关系，指出高活性磷酸催化剂应具备的条件，即自由磷酸中应为正磷酸和焦磷酸的混合物，结合态磷应具有“Ｃ”晶型。     

Measurements of circular polarization correlations following excitation of Ar and Kr by electron impact

We report measurements of the circular polarization correlation parameterP ₃ for the excitation of the 4s′[1/2] _j=1 state in Ar by 40 eV electrons and for the excitation of the Kr 5s[3/2] _J=1 state by 30 eV electrons at electron scattering angles up to 50°. The measured Ar data are compared to predictions of a distorted wave Born approximation (DWBA). The agreement is in general not very good with theory predictingP ₃ values considerably larger than the measured values in the regime of small scattering angles. In Kr, where the measured data are compared to theoretical predictions from a DWBA, a first-order many-body theory (FOMBT) and a relativistic distorted wave theory (RDW), the level of agreement between experiment and theory is somewhat better. The measuredP ₃ parameters in conjunction with the previously measured linear coherence parametersP ₁ undP ₂ under the same scattering conditions yield the total polarizationP _tot ⁺ which is a measure for the level of coherence in the excitation process. In both cases studied here, we found values of eliminateP _tot ⁺ that were consistent with a fully coherent excitation process.     

Self-assembly of lanthanide mixed-carboxylates coordination polymers

Two new mixed-ligands lanthanide coordination polymers, [Ln(Ac)(ip)(H₂O)₂]·0.5H₂O (Ln=La (1); Ln=Eu (2); Ac=acetate; ip=isophthalate) have been synthesized under hydrothermal condition. Single-crystal X-ray analyses show that complexes 1 and 2 are three-dimensional structure in which lanthanide ions are bridged by monocarboxylate ligand, acetate or dicarboxylate ligand, isophthalate. And the central lanthanide ions, La³⁺ and Eu³⁺, are both nine-coordinate with oxygen atoms. The thermogravimetric analysis was carried out to examine the thermal stability of the title complexes. And the photoluminescence property of complex 2 was also investigated.     

Synthesis and characterization of complexes of UO2(II) and Th(IV) of bis-schiff bases derived from furoylpyrazolone

Four new complexes of UO₂(II) and Th(IV) with bis-Schiff bases, derived from N,N'-bis[(l-phenyl-3-methyl-5-oxo-4-pyrazolinyl)-a-furylmethylidyne]-1,2-propylenediimine [1,2-BPMOPFP-H₂] and N,N'- bis[(l-phenyl-3-methyl-5-oxo-4-pyrazolinyl)-a-furylmethylidyne]-1,3-propylenediimine [1,3-BPMOPFP-H₂], were synthesized and characterized by elemental analysis, IR, UV, ¹HNMR spectroscopy, and molar conductivity. The general formula of the complexes was confirmed to be [UO₂(BPMOPFP)], [Th(BPMOPFP)(NO₃)]NO₃. A possible structure for the complexes have been proposed.     

Palladium‐Catalyzed Three‐Component Coupling Reaction of Allyl Carboxylates,Norbornenes and Diboronates Involving Sequential Olefins Insertion and Borylation Reaction

An efficient Pd‐catalyzed three‐component coupling reaction of allyl carboxylates, norbornenes and diboronates is described, which allows efficient assembly of C(sp³)—C(sp³) and C(sp³)—B bonds in a single process. Moreover, this approach shows advantages of good chemo‐ and regioselectivity, as well as good substrates suitability.     

Preparation and swelling properties of hydrolysis-resistant superabsorbent composite based on acrylic acid and sodium bentonite

Abstract

A novel hydrolysis-resistant superabsorbent composite was prepared via the solution polymerization based on acrylic acid (AA) and sodium bentonite (SBT) as monomers, tetraallylammonium bromine (TAAB) as crosslinker and ammonium persulfate (APS) as initiator. The mechanism of polymerization and the structure of the superabsorbent polymer (SAP) were studied by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (X-ray), and scanning electron microscopy (SEM). The reaction conditions such as different mass ratios of APS to AA, TAAB to AA, SBT to AA, neutralization degree of AA were optimized by orthogonal experiment, and the influence of each reaction condition on the capacity of water absorption at 150?°C was investigated via single-factor controlled experiment. The hydrolysis resistance and swelling kinetics of the SAP were studied in different solutions at 150?°C. Compared to traditional SAPs, the SAP synthesized with TAAB as crosslinker performed a more excellent hydrolysis resistance and water absorbency capacity at high temperatures. The water absorbency in distilled water or 0.1?mol L^?1 NaCl solution could reach 392.6 and 145.2?g g^?1at 150?°C, respectively. The SAP maintaining high swelling capacity in the pH range of 5–9 indicated its wide application values in the acidic or alkaline environment at high temperature. In addition, the SAP exhibited good reusability which could still retain about 73% of its initial water absorbency after reswelling six times at 150?°C.     

Cu-Zn-Sn体系富Sn区液相限的研究

近些年来,无铅低熔点填料日渐引起人们的兴趣,且将得到广泛的应用。Cu-Zn-Sn合金正是无铅低熔点填料的一种基本合金。该体系相图虽有一些报道,但他们的研究只涉及富铜区(>50Wt％)的液相限和等温截面(500℃)。我们颇感兴趣的富Sn区的液相限,尚未见文献报道,因此测定该体系富Sn区的液相限是必要的。关于Cu-Zn-Sn体系的三个相关二元体系,已有文献报道,也较成熟。对于Cu-Zn体系,富Zn区600℃以下存在两个转熔反应,其转熔点分别为Q(～88Wt％Zn,598℃),W(97.5-98.5Wt％Zn,424℃);Cu-Sn体系富Sn区有一个转熔反应,其转熔点     

缓慢炭化部分氧化对制备煤质活性炭的影响

研究了炭化升温速度、炭化低温区引入空气部分氧化对活性炭制备过程中炭化阶段、炭化物结构、活性炭性能等的影响。结果表明，炭化时低温部分氧化可提高炭化物得率，使炭化物微晶的ｄ００２值升高和Ｌｃ值减小；而较慢的炭化升温速度有利于制备优质活性炭。缓慢炭化、部分氧化可以在一定程度上控制炭化路径，使炭化向生成取向性差、难石墨化、各向同性、呒定形炭多的炭化物的方向进行；并讨论了它们控制炭化的作用机理。以此为指导，     

Effect of ionic additives on the elution of sodium aryl sulfonates in supercritical fluid chromatography

Addition of a small amount of polar solvent (i.e., modifier) to CO2 in packed column supercritical fluid chromatography (SFC) has shown major improvements in both polar analyte solubility and interaction of the polar analyte with the stationary phase. Recently, the addition of an ionic component (i.e., additive) to the primary modifier by one of us has been shown to extend even further the application of SFC to polar analytes. In this work, the effect of various ionic additives on the elution of ionic compounds, such as sodium 4-dodecylbenzene sulfonate and sodium 4-octylbenene sulfonate, has been studied. The additives were lithium acetate, ammonium acetate, tetramethylammonium acetate, tetrabutylammonium acetate, and ammonium chloride dissolved in methanol. Three stationary phases with different degrees of deactivation were considered: conventional cyanopropyl, deltabond cyanopropyl, and bare silica. The effect of additive concentration and additive functionality on analyte retention was investigated. Sodium 4-dodecylbenzene sulfonate was successfully eluted using all the additives with good peak shape under isocratic/isobaric/isothermal conditions. Different additives, however, yielded different retention times and in some cases different peak shapes.