Properties of Heat Generation in a Double Quantum Dot

We investigate the electronic-current-induced heat generation in a double quantum dot connected by two normal leads. The dots are coupled in series with a coupling strength td. It is found that, at zero temperature and weak dot-lead coupling, td affects the heating and current heavily. In particular, the effects on the heat generation and on the current are quite different. For example, at a heating valley the current can exhibit a deep valley, a plateau, or a high peak depending on td. As a result, we can find an ideal working condition, large current while small heating, for the double dots system by tuning the interdot coupling strength.     

表面绝缘铝平面丝阵Z箍缩实验研究

在"强光一号"装置(1.3 MA,100 ns)上进行了镀2μm聚酰亚胺绝缘膜平面铝丝阵与普通铝丝阵Z箍缩对比实验研究.实验结果表明,表面绝缘能够影响Z箍缩内爆动力学和辐射特性.通过简单理论分析,表面绝缘可能会增加初始阶段的能量沉积和参与内爆的质量;表面绝缘对于抑制平面丝阵多峰现象有明显作用,然而在所进行的实验中,并未观察到对X射线产额的改善作用.     

硅烯饱和吸附碱金属原子的第一性原理研究

基于密度泛函理论的第一性原理计算, 研究了硅烯饱和吸附碱金属元素原子的稳定性、微观几何结构和电子性质, 并与纯硅烯及其饱和氢化结构进行了对比分析. 研究发现复合物SiX(X=Li, Na, K, Rb)的形成能都是负的, 相对于纯硅烯来说可以稳定存在. Bader电荷分析表明, 电荷从碱金属原子转移至硅原子. 从成键方式来看, 硅烯与氢原子形成共价键, 而与碱金属原子之间形成的键主要是离子性成键, 但还存在部分共价关联成分. 能带计算表明, 锂原子饱和吸附在硅烯形成的复合物SiLi是直接带隙的半导体, 带隙大小为0.34 eV. 其他碱金属饱和吸附在硅烯上形成的复合物都表现为金属性.     

基于MoO3/Ag/MoO3透明阳极的顶发射OLED的模拟计算与制备

运用传输矩阵法和正交分析法模拟计算出MoO₃/Ag/MoO₃透明电极的最佳厚度,采用镀膜实验验证模拟计算的准确性,制备了一系列不同MoO₃膜厚度和Ag膜厚度的透明电极。然后,制备了一系列顶发射有机电致发光器件:铝/氟化锂(LiF)/三(8-羟基喹啉)铝(Alq₃)/N,N'-二苯基-N,N'-(1-萘基)-1,1'-联苯-4,4'-二胺/三氧化钼(MoO₃)/银(Ag)/三氧化钼(MoO₃),来进一步验证模拟计算运用在器件制备中的准确性。MoO₃(10 nm)/Ag(10 nm)/MoO₃(25 nm)在532 nm处的透射率达到最大值88.256%,以该透明电极制备的器件与参考器件相比,性能有了明显提高,最大亮度和最大效率分别为20 076 cd/m²和4.03 cd/A,提高了18.5%和56%。器件性能的提高归因于顶发射OLED器件透射率的提高和MoO₃对空穴注入能力的提升。     

Systematically investigating the polarization gradient cooling in an optical molasses of ultracold cesium atoms

We systematically investigate the polarization gradient cooling （PGC） process in an optical molasses of ultracold cesium atoms. The SR mode for changing the cooling laser, which means that the cooling laser frequency is stepped to the setting value while its intensity is ramped, is found to be the best for the PGC, compared with other modes studied. We verify that the heating effect of the cold atoms, which appears when the cooling laser intensity is lower than the saturation intensity, arises from insufficient polarization gradient cooling. Finally, an exponential decay function with a statistical explanation is introduced to explain the dependence of the cold atom temperature on the PGC interaction time.     

CO_2激光光栅式扫描修复熔石英表面缺陷的实验研究与数值模拟

基于熔石英材料对波长为10.6μm的CO2激光具有强吸收作用这一特点,提出采用CO2激光光栅式多次扫描修复熔石英光学元件表面密集分布的划痕和抛光点等缺陷的方法.实验结果表明,在合理的扫描参数下,元件表面的划痕和抛光点等缺陷可被充分地消除.损伤阈值测试结果表明,表面划痕和抛光点等缺陷被完全消除的元件的损伤阈值可回复到或超过基底的损伤阈值.同时结合有限元软件Ansys的模拟结果分析了CO2激光扫描修复及消除元件表面划痕和抛光点等缺陷的过程.本文为消除元件表面划痕和抛光点等缺陷提供了非常有意义的参考.     

辊型CCD检测法中轧辊轴线偏移的补偿

根据激光线阵CCD检测技术原理,提出一种快速、高准确度的轧辊辊型检测方法,阐述了系统组成与检测过程.针对辊型检测过程中易出现的轴线偏移现象,从垂直检测平面和平行检测平面两个方向采取补偿措施,有效地提高了系统检测准确度.同时检测系统对CCD信号进行处理时,采用浮动阈值法,有效降低噪音对CCD成像质量的影响,保证了系统的分辨率与检测准确度.实验证明,系统的检测准确度可达到实际生产过程中辊型检测的要求,为实现辊型在线检测的高速、高准确度、高自动化提供了一种新的研究方法.     

STABILITY AND ALMOST PERIODIC SOLUTIONS OF FUNCTIONAL DIFFERENTIAL EQUATIONS OF NEUTRAL TYPE

ＳＴＡＢＩＬＩＴＹＡＮＤＡＬＭＯＳＴＰＥＲＩＯＤＩＣＳＯＬＵＴＩＯＮＳＯＦＦＵＮＣＴＩＯＮＡＬＤＩＦＦＥＲＥＮＴＩＡＬＥＱＵＡＴＩＯＮＳＯＦＮＥＵＴＲＡＬＴＹＰＥＹｕａｎＲｏｎｇ（袁荣）（ＢｅｉｊｉｎｇＮｏｒｍａｌＵｎｉｖｅｒｓｉｔｙ，北京师范大学，...     

Stereodynamics in reaction O（1D） ＋ CH4 〉OH ＋ CH3

A theoretical study of the stereodynamics for reaction O(1D) + CH4→OH + CH3 has been carried out using the quasiclassical trajectory method(QCT) on a potential energy surface structured by Gonzalez et al. The integral cross sections(ICSs), differential cross sections(DCSs) and product rotational angular momentum polarization have been calculated. With the collision energy increasing, the ICS decreases. There is no threshold energy, because no barrier is found on the minimum energy path. The DCS results show that the backward and forward scatterings exist at the same time. With the collision energy increasing, the dominant rotation of the product changes from the right-handed direction to the left-handed direction in planes parallel to the scattering plane. In the isotopic effect study, the decrease of the mass factor weakens the polarization degree of the rotational angular momentum vectors of the products.     

Effect of NaCl doped into Bphen layer on the performance of tandem organic light-emitting diodes

To improve the performance of tandem organic light-emitting diodes （OLEDs）, we study the novel NaCl as n-type dopant in Bphen：NaCl layer. By analyzing their relevant energy levels and cartier transporting characteristics, we discuss the mechanisms of the effective charge generation layer （CGL） of Bphen：NaCl （6 wt%）/MoO3. In addition, we use the Bphen：NaC1 （20 wt%） layer as the electron injection layer （ELL） combining the CGL to further improve the performance of tandem device. For this tandem device, the maximal current efficiency of 9.32 cd/A and the maximal power efficiency of 1.93 lm/W are obtained, which are enhanced approximately by 2.1 and 1.1 times compared with those of the single- emissive-unit device respectively. We attribute this improvement to the increase of electron injection ability by introducing of Bphen：NaCl layer. Moreover, the CGL is almost completely transparent in the visible light region, which is also important to achieve an efficient tandem OLEDs.