无叶扩压段型线对离心压气机性能的影响

本文设计了无叶扩压段轮盖侧型线,并采用CFD软件数值模拟了采用两种不同轮盖侧型线结构的离心压气机级．分析了无叶扩压段内部的流动结构和熵的分布．计算结果说明无叶扩压段轮盖侧型线对上游叶轮、下游叶片扩压器以及离心压气机级性能有较大影响．     

垂直低温两相流管底液氮汽泡上升速度的实验研究

本文对垂直低温两相流管底部液氮汽泡的上升速度运用高速摄像机进行了可视化实验研究,对所采集的实时图像进行处理.在Cole和Mendelson汽泡上升速度经验公式的基础上,通过对液氮汽泡的上升速度的分析,提出了圆管管路底部液氮汽泡的上升速度的拟合公式,分析研究其变化规律,为进一步探求圆管内液氮弹状汽泡的生成机理提供依据.     

Separate Polarization Modes Synchronization and Synchronization Switches between Vertical-Cavity Surface-Emitting Lasers

For vertical-cavity surface-emitting lasers (VCSELs) with polarization-rotated feedback, there exist several synchronization types such as synchronizations between total powers and synchronizations between separate polarization modes. Based on the two-mode rate equations, we study and compare numerically the performances of different synchronization types. Our results show that three synchronization types exhibit good performances when their synchronization conditions are satisfied. They are the complete synchronization between total powers, complete synchronization between x-polarized modes, and generalized synchronization between x-polarized and y-polarized modes. The former two types are sensitive to the injection rate and spontaneous emission, while the third type is contrary. Synchronization type with the best performance may switch from one to another, with changing of injection rate and spontaneous emission factor.     

Eu3+离子在微晶玻璃研究中的探针作用

制备出单掺Eu3+离子的氟氧化物玻璃陶瓷系列样品,利用Eu3+离子作为荧光探针,通过热处理前后Eu3+离子发射光谱中电偶极子跃迁与磁偶极子跃迁强度比值的变化表征在玻璃材料中微晶是否形成,分析了Eu3+离子荧光发射谱中电偶极子跃迁与晶体场对称性的关系,进一步表征了稀土离子所处微晶晶格场的变化.     

二维电子气等离激元太赫兹波器件

固态等离激元太赫兹波器件正成为微波毫米波电子器件技术和半导体激光器技术向太赫兹波段发展和融合的重要方向之一。本综述介绍AlGaN/GaN异质结高浓度和高迁移率二维电子气中的等离激元调控、激发及其在太赫兹波探测器、调制器和光源中应用的近期研究进展。通过光栅和太赫兹天线实现自由空间太赫兹波与二维电子气等离激元的耦合,通过太赫兹法布里-珀罗谐振腔进一步调制太赫兹波模式,增强太赫兹波与等离激元的耦合强度。在光栅-谐振腔耦合的二维电子气中验证了场效应栅控的等离激元色散关系,实现了等离激元模式与太赫兹波腔模强耦合产生的等离极化激元模式,演示了太赫兹波的调制和发射。在太赫兹天线耦合二维电子气中实现了等离激元共振与非共振的太赫兹波探测,建立了太赫兹场效应混频探测的物理模型,指导了室温高灵敏度自混频探测器的设计与优化。研究表明,基于非共振等离激元激发可发展形成室温高速高灵敏度的太赫兹探测器及其焦平面阵列技术。然而,固态等离激元的高损耗特性仍是制约基于等离激元共振的高效太赫兹光源和调制器的主要瓶颈。未来的研究重点将围绕高品质因子等离激元谐振腔的构筑,包括固态等离激元物理、等离激元谐振腔边界的调控、新型室温高迁移率二维电子材料的运用和高品质太赫兹谐振腔与等离激元器件的集成等。     

飞秒激光加工蓝宝石超衍射纳米结构

蓝宝石具有超强硬度及耐腐蚀、耐高温、在紫外-红外波段具有良好的透光性等优点,在军工业以及医疗器械方面具有广泛的应用前景.然而这些优点又对蓝宝石的机械加工或化学腐蚀加工带来困难.飞秒激光脉冲具有热损伤小、加工分辨率高、材料选择广等特点,被广泛应用于固体材料改性和高精度三维微纳器件加工.本文提出了利用飞秒激光多光子吸收特性在蓝宝石表面实现超越光学衍射极限的精细加工.利用聚焦后的波长为343 nm的飞秒激光,配合高精密三维压电位移台,实现激光焦点和蓝宝石晶体的相对三维移动,在蓝宝石晶体衬底上进行精确扫描,得到了线宽约61 nm的纳米线,纳米线间的最小间距达到142 nm左右.利用等离子体模型解释了加工得到的纳米条纹的产生原因,研究了激光功率、扫描速度对加工分辨率的影响.最终本工作实现了超越光学衍射极限的加工精度,为实现利用飞秒激光对高硬度材料的微纳结构制备提供了参考.     

同轴强流双环形阴极的发射特性分析

提出了一种同轴双环形阴极结构二极管,并进行理论求解和仿真研究,得到了双环形阴极二极管中,内外环上场强一致时二极管内尺寸分布关系。并采用粒子仿真软件进行了双环形阴极爆炸发射模拟研究,研究结果表明,双环形阴极发射束流由高压加载后初始时刻二极管内电场分布和内外环形阴极相互之间屏蔽作用的竞争结果决定。提出了两阴极相互之间屏蔽作用的经验公式,指出该相互屏蔽作用程度随发射总束流呈线性关系,随两阴极距离呈指数关系,最终采用粒子仿真软件进行了验证。     

Crystallization process of Bi(Pb)-Sr-Ca-Cu-O glass

A crystallization study has been carried out for rapidly solidified Bi₂Pb_0.5Sr₂Ca₄Cu₅O_x glass. Glass transition temperature T _g, crystallized superconducting phases and microstructural changes were measured and analysed by differential thermal analysis (DTA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The crystallization mechanism of the three superconducting phases — (2201) 20 K phase, (2212) 80 K phase, and (2223) 110 K phase — has been discussed, and a time-temperature-transformation diagram for the glass has been constructed.     

不同结构毛细管网辐射板供冷性能实验研究

对两种不同结构毛细管网辐射板的性能进行了实验研究,分析了在不同供水温度下,该两种辐射板在表面温度分布、供冷能力、安装辐射板房间温度变化情况之间的差异,为今后毛细管网辐射供冷空调系统辐射末端的设计应用及运行控制提供依据。     

Quantitative evaluation of equatorial small-angle X-ray scattering for cylindrical fibers

Elongated microvoids, internal fibrillar structure, and edge scattering from both surface refraction cause an equatorial streak in small angle X-ray scattering. A model for analyzing the edge scattering of fibers is proposed. Simulation results indicate that the intensity of edge scattering from surface refraction of a cylindrical fiber is strong and makes an important contribution to the equatorial streak. Two factors influence edge scattering intensity. One is the sample-to-detector distance (D); edge scattering intensity increases with increasing D. The equatorial streak becomes weak when D is shortened. The other factor is the refraction index. Edge scattering intensity increases as the real component of the refraction index decreases. In experiment, weak or even no equatorial streaks were found for samples measured in a roughly index-matching fluid. Edge scattering can be eliminated or weakened, and it can be calculated by comparing the intensities of a cylindrical fiber when it is measured in air and in index-matching fluid. The simulation data are basically in agreement with the experimental data.