Chelating and Tellurolate Ligand‐Transfer Studies of the Complex fac‐[Fe(CO)3(TePh)3]−: Crystal Structures of Heterodinuclear (CO)3Mn(μ‐TePh)3Fe(CO)3 and CpNi(TePh)(PPh3)

Complex fac‐[Fe(CO)₃(TePh)₃]^? was employed as a “metallo chelating” ligand to synthesize the neutral (CO)₃Mn(μ‐TePh)₃Fe(CO)₃ obtained in a one‐step synthesis by treating fac‐[Fe(CO)₃(TePh)₃]^? with fac‐[Mn‐(CO)₃(CH₃CN)₃]⁺. It seems reasonable to conclude that the d⁶ Fe(II) [(CO)₃Fe(TePh)₃]^? fragment is isolobal with the d⁶ Mn(I) [(CO)₃Mn(TePh)₃]^2? fragment in complex (CO)₃Mn(μ‐TePh)₃Fe(CO)₃. Addition of fac‐[Fe(CO)₃(TePh)₃]^? to the CpNi(I)(PPh₃) in THF resulted in formation of the neutral CpNi(TePh)(PPh₃) also obtained from reaction of CpNi(I)(PPh₃) and [Na][TePh] in MeOH. This investigation shows that fac‐[Fe(CO)₃(TePh)₃]^? serves as a tridentate metallo ligand and tellurolate ligand‐transfer reagent. The study also indicated that the fac‐[Fe(CO)₃(SePh)₃]^? may serve as a better tridentate metallo ligand and chalcogenolate ligand‐transfer reagent than fac‐[Fe(CO)₃(TePh)₃]^? in the syntheses of heterometallic chalcogenolate complexes.     

Phenylated poly(P-phenylene vinylenes) prepared via the chlorine precursor route (CPR)

The synthesis of several highly phenylated PPV derivatives by a chlorine precursor route (CPR) was investigated in order to understand its scope. Three 1,4-bis(chloromethyl)benzene monomers were prepared via a robust and versatile synthetic procedure involving the Diels-Alder reaction. The monomers were then polymerized to the corresponding precursor polymers with about 1.0 equivalent of potassium t-butoxide in THF. Only one monomer gave a soluble precursor polymer while the other two gave insoluble precursor polymers. The soluble precursor polymer was deposited as thin films and then converted to the corresponding PPV derivative, which showed green photoluminesence and electroluminesence.     

Probing the Adhesion of Hepatocellular Carcinoma HepG2 and SK‐Hep‐1 Cells

Carcinoma cell differentiation stage is an important indicator of cell behavior. For example, cell mobility is much higher for poorly‐differentiated hepatocellular carcinoma SK‐Hep‐1 cells than for well‐differentiated HepG2 cells. In this study, we have cultured HepG2 and SK‐Hep‐1 cells on chemically patterned polydimethylsiloxane (PDMS) substrates to observe differences in the adhesion properties and cell structure that occur due to the patterns. Both cell lines showed a preference for the hydrophobic regions on the patterned PDMS surface with SK‐Hep‐1 cells achieving a higher density than HepG2 for the same cell‐count solutions. Further, SK‐Hep‐1 cells adopted the square or hexagonal shape of the surface patterns while HepG2 cells maintained their more rounded shape. AFM force measurement arrays were also performed on the cell surfaces to measure and map adhesion values between the tip and cell surface membrane. These results demonstrate that, in addition to cell shape and size, adhesion expression in hepatocellular carcinoma cells is differentiation stage dependent. Further, the ability of the SK‐Hep‐1 cells to adopt the shape of the substrate pattern indicates they are more structurally labile, which may contribute to their higher mobility.     

Effect of processing conditions on gel formation in ternary cellulose acetate systems

A series of ternary systems composed of cellulose acetate (CA), N,N-dimethylacetamide (DMA), and water were prepared by varying the mixing temperature and order of component addition with increasing water content. The viscoelastic properties of the resulting ternary systems were measured using steady state and dynamic rheology. The CA/DMA/H₂O mixture formed physical gels at 17.5 and 19 wt% water concentrations after heating to 50 and 70/90 °C, respectively. Gel formation was characterized by the loss of a Newtonian plateau in the steady state as well as the transition of the elastic (G′) modulus becoming greater than the viscous (G″) modulus in the dynamic state. The order of component addition dramatically affected phase behaviour. Adding CA to the DMA/water solution resulted in lower moduli gels and the formation of a two-phase phase separated system at high nonsolvent contents in those prepared at low temperatures. The kinetics of phase separation was improved by subjecting the gels to a thermal treatment of 90 °C. In this case, the gels previously heated at 50 and 70° C showed a one-phase phase separated gel with higher viscous and elastic moduli.     

Regulated expressions of MMP-2, -9 by diterpenoids from Euphorbia formosana Hayata

Two new abietane type diterpenoids, namely seco-helioscopinolide (1) and 3b,7b-dihydroxy-ent-abieta-8,13-diene-12,16-olide (2) were isolated from the aerial parts of Euphorbia formosana Hayata together with helioscopinolide A (3), helioscopinolide B (4), helioscopinolide C (5) and ent-(5b,8a,9b,10a,12a)-12-hydroxyatis-16-ene-3,14-dione (6). The structures of compounds 1-6 were elucidated by analyzing their spectroscopic data and comparison with the literature. Further biological tests by gelatin zymographic analysis revealed that 3-5 significantly up-regulated the expressions and activation of MMP-2 and -9 in human fibrosarcoma cell line HT1080.     

Study on tribological behaviors of short glass fiber and polytetrafluoroethylene reinforced polycarbonate composites via a d‐optimal mixture design

This study analyzed variations of tribological behaviors that depend on the injection molding techniques during the blending of short glass fiber (SGF) and polytetrafluoroethylene (PTFE) reinforced polycarbonate (PC) composites. The proposed planning of blending experiments is to use a D‐optimal mixture design (DMD). The tribological behaviors of friction coefficient and wear mass loss were selected for discussion. Nine experimental runs, based on a DMD method, utilized to train the back‐propagation neural network (BPNN) and then the simulated annealing algorithm (SAA) approach is applied to search for an optimal mixture ratio setting. In addition, the result of BPNN integrating SAA was also compared with response surface methodology (RSM) approach. The results of confirmation experiment show that DMD, RSM, and BPNN integrating SAA method are effective tools for the optimization of reinforced process. Furthermore, the scanning electron microscope (SEM) images show that the abundant debris are peeled off from the matrix materials and predominant delamination mechanisms and plastic deformation are shown on the worn surface after tribological behavior tests. Copyright © 2010 John Wiley & Sons, Ltd.     

Fluorescence studies of the interaction between chloramphenicol and nitrogen-doped graphene quantum dots and determination of chloramphenicol in chicken feed

Chloramphenicol (CAP) is a veterinary antibiotic that has been banned due to its severe side effects in humans. Through the application of manure, veterinary antibiotics can enter the soil, where they can be taken up by crops and vegetables and pose a potential health hazard to humans. Thus, it is highly desirable to develop a rapid and sensitive tool for on-site detection of CAP to ensure food safety and to control the abuse of antibiotics. To this end, nitrogen-doped graphene quantum dots (N-GQDs) were successfully prepared via microwave-assisted synthesis using citric acid and urea as carbon and nitrogen sources, respectively. Analytical results suggested that the interaction between N-GQDs and CAP could occurs via π-π stacking, which quenched N-GQD fluorescence. CAP spiked into chicken feed could be rapidly extracted with ethanol and quantified based on N-GQD fluorescence quenching without further separation. This method showed good recovery (97–102.6%), a low detection limit (1.8 ppm), and was not affected by interference from florfenicol, and thiamphenicol, legal substitute antibiotics. This method has excellent potential for determination of CAP in livestock feed and soil.     

Optical and structural characteristics of yttrium doped ZnO films using sol–gel technology

Yttrium-doped ZnO gel was spin-coated on the SiO₂/Si substrate. The as-prepared ZnO:Y (YZO) thin films then underwent a rapid thermal annealing (RTA) process conducted at various temperatures. The structural and photoluminescence characteristics of the YZO films were discussed thereafter. Our results indicated that the grain size of YZO thin films being treated with various annealing temperatures became smaller as compared to the ones without being doped with yttrium. Furthermore, unlike other ZnO films, the grains of YZO thin films appeared to separate from one another rather than aggregating together as both types of the films were annealed under the same environment. The photoluminescence characteristic measured showed that the UV emission was the only radiation obtained. However, the UV emission intensity of YZO thin film was much stronger than that of the ZnO thin film after annealing them with the same condition. It was also found that the intensity increased with an increase in the annealing temperature, which was caused by the exciton generated and the texture surface of the YZO thin film.     

A study on dose response of NIPAM-based dosimeter used in radiotherapy

The newly manufactured N-isopropylacrylamide (NIPAM) polymer gel is composed of four components, i.e., gelatin, monomer (NIPAM), crosslinker (N,N’-methylenebisacrylamide, Bis), and antioxidant (tetrakis hydroxymethyl phosphonium chloride, THPC). In this study, we investigated the effects of gel composition on the dose response of NIPAM polymer gel. A statistical experiment to analyze the contribution of each composition to the linearity and sensitivity of NIPAM gel was performed. Results indicate that the amount of gelatin, NIPAM (15.17%), Bis, and THPC have dominant effects on the sensitivity of the gel, with contributions of 59.73, 15.17, 10.64, and 14.45%, respectively. The amount of gelatin and Bis mainly affected the linearity of the gel, with contributions of 44.70 and 50.99%, respectively. The linearity of most compositions of the gel was greater than 0.99 when (%C)/(%T) was lower than 8.0. Optimal (%C)/(%T) for higher sensitivity should be in the range of 4−9. The temporal stability experiment showed that the dose response curve attained stability at about 5 h after irradiation and persisted up to 3 months.