Complex thermal evaluation for 2,2′-azobis(isobutyronitrile) by non-isothermal and isothermal kinetic analysis methods

Azo compounds are widely used in dyes, pigments, blowing agents, and initiators. Unfortunately, these compounds contain the bivalent –N–N– composition which might be cleavaged readily even under high ambient temperature. The self-accelerating decomposition might cause a runaway reaction and lead to a fire or explosion when the cooling system fails or other upsets occur. To investigate the thermal stability parameters of 2,2′-azobis(isobutyronitrile) with thermal hazard and mechanism, differential scanning calorimetry and thermal activity monitor III were applied with non-isothermal method and isothermal method to obtain onset temperature (T ₀), maximum temperature (T _max), and heat of decomposition (ΔH _d). Thermal stability parameters play a pivotal role in thermal analysis, leading particularly to complex evaluation of the inherently safer design during preparation, processing, transport, or storage. The results provide sufficient thermokinetic parameters for process safety in terms of proactive loss prevention program.     

Molecular Engineering of Push–Pull Porphyrin Dyes for Highly Efficient Dye‐Sensitized Solar Cells: The Role of Benzene Spacers

Porphyrins have drawn much attention as sensitizers owing to the large absorption coefficients of their Soret and Q bands in the visible region. In a donor and acceptor zinc porphyrin we applied a new strategy of introducing 2,1,3‐benzothiadiazole (BTD) as a π‐conjugated linker between the anchoring group and the porphyrin chromophore to broaden the absorption spectra to fill the valley between the Soret and Q bands. With this novel approach, we observed 12.75 % power‐conversion efficiency under simulated one‐sun illumination (AM1.5G, 100 mW cm^?2). In this study, we showed the importance of introducing the phenyl group as a spacer between the BTD and the zinc porphyrin in achieving high power‐conversion efficiencies. Time‐resolved fluorescence, transient‐photocurrent‐decay, and transient‐photovoltage‐decay measurements were employed to determine the electron‐injection dynamics and the lifetime of the photogenerated charge carriers.     

Stereoelectronic Basis for the Kinetic Resolution of N‐Heterocycles with Chiral Acylating Reagents

The kinetic resolution of N‐heterocycles with chiral acylating agents reveals a previously unrecognized stereoelectronic effect in amine acylation. Combined with a new achiral hydroxamate, this effect makes possible the resolution of various N‐heterocycles by using easily prepared reagents. A transition‐state model to rationalize the stereochemical outcome of this kinetic resolution is also proposed.     

Nanocomposites of Tantalum‐Based Pyrochlore and Indium Hydroxide Showing High and Stable Photocatalytic Activities for Overall Water Splitting and Carbon Dioxide Reduction

Nanocomposites of tantalum‐based pyrochlore nanoparticles and indium hydroxide were prepared by a hydrothermal process for UV‐driven photocatalytic reactions including overall water splitting, hydrogen production from photoreforming of methanol, and CO₂ reduction with water to produce CO. The best catalyst was more than 20 times more active than sodium tantalate in overall water splitting and 3 times more active than Degussa P25 TiO₂ in CO₂ reduction. Moreover, the catalyst was very stable while generating stoichiometric products of H₂ (or CO) and O₂ throughout long‐term photocatalytic reactions. After the removal of In(OH)₃, the pyrochlore nanoparticles remained highly active for H₂ production from pure water and aqueous methanol solution. Both experimental studies and density functional theory calculations suggest that the pyrochlore nanoparticles catalyzed the water reduction to produce H₂, whereas In(OH)₃ was the major active component for water oxidation to produce O₂.     

Porosity‐Controlled Eggshell Membrane as 3D SERS‐Active Substrate

We report on the fabrication of a surface‐enhanced Raman scattering (SERS) platform, comprised of a three‐dimensional (3D) porous eggshell membrane (ESM) scaffold decorated with Ag nanoparticles (NPs). Both native and treated ESM were used, where the treated ESM pore size and fiber crossing density was controlled by timed exposure to hydrogen peroxide (H₂O₂). Ag NPs were synthesized in situ by reduction of silver nitrate with ascorbic acid. Our results demonstrate that H₂O₂‐treated Ag‐ESM provides a more densely packed 3D network of active material, which leads to consistently higher SERS enhancement than untreated Ag‐ESM substrates.     

Miniaturized Sequencing Gel System for Quick Analysis of DNA by Hydroxyl Radical Cleavage

We described a simple and quick miniaturized sequencing gel system for DNA analysis. Two major modifications were made to the previously reported miniaturized DNA sequencing gel system to achieve high-resolution hydroxyl radical cleavage analysis: including formamide in the miniaturized gel and providing uniform heating during electrophoresis. Our method enables one to reduce the cost for chemicals and to significantly reduce electrophoresis time. Furthermore, minimal gel handling simplifies the entire process. We show that the resolution of DNA fragments obtained by hydroxyl radical cleavage for the miniaturized gel is similar to that of a large conventional sequencing gel.     

Fluorescence studies of the interaction between chloramphenicol and nitrogen-doped graphene quantum dots and determination of chloramphenicol in chicken feed

Chloramphenicol (CAP) is a veterinary antibiotic that has been banned due to its severe side effects in humans. Through the application of manure, veterinary antibiotics can enter the soil, where they can be taken up by crops and vegetables and pose a potential health hazard to humans. Thus, it is highly desirable to develop a rapid and sensitive tool for on-site detection of CAP to ensure food safety and to control the abuse of antibiotics. To this end, nitrogen-doped graphene quantum dots (N-GQDs) were successfully prepared via microwave-assisted synthesis using citric acid and urea as carbon and nitrogen sources, respectively. Analytical results suggested that the interaction between N-GQDs and CAP could occurs via π-π stacking, which quenched N-GQD fluorescence. CAP spiked into chicken feed could be rapidly extracted with ethanol and quantified based on N-GQD fluorescence quenching without further separation. This method showed good recovery (97–102.6%), a low detection limit (1.8 ppm), and was not affected by interference from florfenicol, and thiamphenicol, legal substitute antibiotics. This method has excellent potential for determination of CAP in livestock feed and soil.     

Stage-frit: A straightforward sub-2 μm nano-liquid chromatography column fabrication for proteomic analysis

In this work we demonstrated a facile method for the fabrication of C18 coordination polymer gel in a capillary, called stage-frit, which was efficiently applied to pack sub-2 μm C18 beads into the capillary by a high pressure bomb for the online separation of proteolytic peptides. The back pressure of the column with 10 cm × 75 μm i.d. is regularly lower than 170 bar at a flow rate of 300 nl/min, which could be operated on a common nanoLC system instead of nanoUPLC system due to the good permeability, low back pressure and high mechanical stress of the frit that will totally reduce the cost for the purchase of instrument. The stage-frit allows long-term continuous flow of the solvent and no significant beads loss or pressure instability was observed during the period. The repeatability of retention time for fifteen BSA tryptic peaks was found to be less than 1.08% (RSD) in six time nanoLC-ESI-MS/MS experiments. The average full width at half maximum (FWHM) of peptide peaks is 5.87 s. The sub-2 μm stage-frit nanoLC column showed better sensitivity than the commercial available for large scale proteomic analysis of total tissue proteins from human spleen. The number of identified peptides is approximately 0.4-fold and 0.2-fold higher than that obtained by utilizing commercial columns packed with 3 μm and 1.8 μm C18 materials, respectively. In the field of analytical chemistry, particularly the use of nanoLC systems, stage-frit nanoLC column offers a great potential for the separation of complex mixtures.     

On damping coefficient due to phase transformation

The damping coefficient of capillary waves due to the evaporation-condensation process at the interface of the two phases of a fluid is evaluated. To highlight the mechanism of the effect of heat and mass transfer across the interface between regions of liquid and vapor, potential flow of incompressible fluids are assumed. Thus other mechanisms of damping are neglected. To fascilitate the analysis, the method of multiple-scale is employed in the analysis, even though the problem is linear.