Polarization-dependent optical tuning of focal intensity of liquid crystal polymer microlens array

This work demonstrates the feasibility of a microlens array (MLA) with a focal intensity that can be optically tuned by controlling the polarization of incident light. The proposed MLA has a focusing unit based on birefringent liquid crystalline polymer (LCP) and a tuning unit with a photo-alignment layer for controlling the polarization state of incident laser light. The optically variable refractive indices of LCP allow a positive or negative MLA to be realized by controlling the polarization of the incident light.     

Measurement of aflatoxin M1 in milk by ultra-high-performance liquid chromatography/tandem mass spectrometry

A sensitive method was developed using ultra-high-performance liquid chromatography (UHPLC)/MS/MS with positive electrospray ionization for determining aflatoxin M1 (AFM1) in milk and milk powder. A 50 mL quantity of low-fat liquid milk containing 100 ng/L AFM1, was prepared using immunoaffinity columns with a mean recovery rate of 79% (n = 3). UHPLC columns (BEH C18, BEH HILIC, and HSS T3) greatly reduced the chromatographic time and lowered the instrumental detection limits (IDLs) 16 to 58 times compared to an HPLC column (Betabasic C18). The HSS T3 column was chosen because it provided a low IDL (0.11 pg) and the lowest ion suppression of signal intensity (63.4%) among the tested columns. Matrix-fortified calibration curves were used for quantification and showed good linearity (r > 0.997) at 0.05-500 ng/mL. The LOD was 0.18 ng/kg for milk and 2.08 nglkg for milk powder, based on the signal intensity of the confirmatory product ion (m/z 259.1), which was less abundant than the quantitative product ion (m/z 273.1). Certified reference materials of milk powder at three levels (<0.05, 0.111 +/- 0.018, and 0.44 +/- 0.06 microg/kg) were measured within a day and between days; the results were all close to the certified levels with low variations (RSDs < 15%), showing good precision and accuracy.     

Dye-sensitized solar cells based on multiwalled carbon nanotube-titania/titania bilayer structure photoelectrode

Dye-sensitized solar cells (DSSCs) were fabricated using multiwalled carbon nanotube (MWCNT)-TiO(2) nanocomposite as a light scattering layer. Morphology of the MWCNT-TiO(2) film was investigated by field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). FESEM and TEM images demonstrate that MWCNTs and TiO(2) nanoparticles can be dispersed with chitosan. Internal resistance in the DSSC was characterized by electrochemical impedance spectroscopy (EIS). EIS results reveal a decrease in the charge resistance of electrolyte/dye/MWCNT-TiO(2)/TiO(2) interface with increasing MWCNT content up to 3 wt% which leads to an improvement in the photovoltaic performance. Compare with a nanocrystalline TiO(2) single-layer cell, the DSSC based on the MWCNT (3 wt%)-TiO(2)/TiO(2) bilayer structure photoelectrode shows ~100% increase in solar-to-electric energy conversion efficiency, which is attributed to the inclusion of MWCNTs in TiO(2) matrix.     

Electrical potentials of two identical particles with fixed surface charge density in a salt-free medium

The electrical potentials of two identical planar, cylindrical, and spherical particles immersed in a salt-free dispersion are solved analytically by a perturbation approach for the case of constant surface charge density. The system under consideration simulates, for example, micelles, where the ionic species in the liquid phase come mainly from the dissociation of the functional groups on the droplet surface. We show that for planar particles, the present zero-order perturbation solution is exact, and for cylindrical and spherical particles, the first-order perturbation solution provides sufficiently accurate results, with an averaged percentage deviation on the order of 1% under typical conditions. In general, the higher the surface charge density, the higher the valence of counterions, the smaller the separation distance between two particles, and the smaller the curvature of particle surface, the better the performance of the perturbation solution.     

Gold nanoparticle-based inductively coupled plasma mass spectrometry amplification and magnetic separation for the sensitive detection of a virus-specific RNA sequence

We have developed a sensitive gold nanoparticle (AuNP)-based inductively coupled plasma mass spectrometry (ICP-MS) amplification and magnetic separation method for the detection of oligonucleotide sequences. The assay relies on (i) the sandwich-type binding of two designed probe sequences that specifically recognize the target oligonucleotide sequences, (ii) magnetic bead separation, and (iii) AuNP-based ICP-MS amplification detection. To enhance the analytical signal and minimize the background signal resulting from nonspecific binding, we performed a series of experiments to evaluate the effects of various parameters (the concentration of the capture probe; the time required for hybridization; the number of washings required to eliminate nonspecific binding) on the oligonucleotide detection. Under the optimized conditions, the detection limit was 80zmol (corresponding to 1.6fM of the target sequence in a sample volume of 50μL). Moreover, it employs a shorter hybridization step and ICP-MS, this procedure is relatively simple and rapid (ca. 1.5h). Based on the analytical results obtained using complementary and mismatched sequences, our method exhibits good performance in distinguishing complementary and random oligonucleotides. Compared with the "gold standard" methodology (plaque assay) for the quantification of dengue virus, our method has the capability to allow early detection of dengue virus in complicated and small-volume samples, with high specificity, good analytical sensitivity, and superior time-effectiveness.     

Analyses of non-steroidal anti-inflammatory drugs by on-line concentration capillary electrochromatography using poly(stearyl methacrylate-divinylbenzene) monolithic columns

This study describes the ability of on-line concentration capillary electrochromatography (CEC) coupled with UV or mass spectrometry (MS) for the determination of nine common non-steroidal anti-inflammatory drugs (NSAIDs) in water samples. A series of poly(stearyl methacrylate-divinylbenzene) (poly(SMA-DVB)) monolithic columns, which were prepared by single step in situ polymerization of divinylbenzene (DVB), stearyl methacrylate (SMA) and vinylbenzenesulfonic acid (VBSA, charged monomer), were developed as separation columns for the first time. The effects of polymerization condition of monolithic columns on analyte separations were examined, and the results indicated that separation performances were markedly improved in monolithic columns prepared with short reaction time (3 h) and low SMA:DVB ratio (40/60 ratio of SMA:DVB). Subsequently, an on-line concentration step of step-gradient elution was combined to this CEC system, and by optimizing the difference in eluent strength between the sample matrix and mobile phase, all NSAIDs detection sensitivity were improved (limit of detection (LOD) was 3.4-10 μg/L for UV, and 0.01-0.19 μg/L for MS). When compared to the best CE and LC reports on NSAIDs analyses so far, this on-line concentration CEC method provided better detection ability within shorter separation time (12 min) when either UV or MS detector was employed. This is the first report for on-line concentration CEC with MS detection applied in trace solute analyses of real samples.     

Anti-scratch and transparency properties of transparent conductive carbon nanotube films improved by incorporating polyethoxysiloxane

Transparent conductive films of single-walled carbon nanotubes (SWCNTs) were fabricated by a simple method to significantly enhance anti-scratch and transparency properties by the incorporation of polyethoxysiloxane (PES). The reasons for changes in the mechanical properties and transmittance were investigated through the reflection property and morphology of thin films. With the incorporation of PES, the sheet resistance of the SWCNT thin film remained unchanged after the anti-scratch test. It was found that the transmittance of the thin films suddenly increased when the thickness of the PES layer was ca 100 nm. Although the PES incorporation resulted in a slight increase in the sheet resistance, the experimental results revealed that the sheet resistance of the SWCNT thin films with PES was lower than that of films without PES for the same transmittance due to the increase of the transmittance caused by the PES incorporation. We have demonstrated that the sheet resistance was halved at a transmittance of ～86% due to PES incorporation. SWCNT thin films with PES showed better electrical properties than those without PES after a bend test.     

Influence of membrane layer properties on the electrophoretic behavior of a soft particle

The influence of the physical properties of the membrane layer of a soft particle, which comprises a rigid core and a porous membrane layer, on its electrophoretic behavior, is investigated. Because that influence was almost always neglected in the previous studies, the corresponding results can be unrealistic. The applicability of the model proposed is verified by the available theoretical and experimental results. The electrophoretic mobility of the particle under various conditions is simulated through varying the dielectric constant, the thickness, and the drag coefficient of the membrane layer, and the bulk ionic concentration. We show that under typical conditions, the deviation in the electrophoretic mobility arising from assuming that the dielectric constant of the membrane layer is the same as that of the bulk liquid phase can be in the order of 50%. In addition, the thicker the membrane layer and/or the higher the bulk ionic concentration, the larger the deviation. If the surface of the core of the particle is charged, as in the case of inorganic particles covered by an artificial membrane layer, the deviation at constant core surface potential is larger than that under other types of charged conditions. However, if the surface of the core is uncharged, as in the case of biocolloids, then that deviation becomes negligible. These findings are of fundamental significance to theoreticians in their analysis on the electrokinetic behaviors of soft particles, and to experimentalists in the interpretation of their data.