镧掺杂水滑石材料的热分解过程研究

采用共沉淀法制备了系列La掺杂改性的含Cu类水滑石,高温焙烧得到其衍生混合氧化物材料,并用XRD,TG-DSC,FT-IR等对材料进行表征.结果表明,前驱物XRD图谱呈典型的水滑石衍射特征且颗粒结晶良好;经800℃焙烧后,掺杂La2O3含量为5.1%的样品仅有Mg1-xFexO晶相出现,说明La的掺杂提高了材料的高温稳定性,混合氧化物中的Cu离子呈高分散状态.     

Terahertz wave tomographic imaging with a Fresnel lens

We demonstrate three-dimensional tomographic imaging using a Fresnel lens with broadband terahertzpulses.Objects at various locations along the beam propagation path are uniquely imaged on the sameimaging plane using a Fresnel lens with different frequencies of the imaging beam.This procedure allowsthe reconstruction of an object's tomographic contrast image by assembling the frequency-dependentimages.     

A Mossbauer study of the magnetic coupling in iron phosphorous trisulfides

The polycrystalline sample of layered compound FePS_3 has been investigated by using M?ssbauer spectroscopy (12K to 300K), magnetic susceptibility measurements, x-ray diffraction and FTIR spectroscopy. The antiferromagnetic order exists below T_N=120.5±1K. The M?ssbauer spectra below T_N indicate that the magnetization axis is perpendicular to the layer of FePS_3, and the divalent iron cations are in their high spin configurations. By fitting the hyperfine field parameters near the Néel temperature, we obtain information on the nature of magnetic interactions in the material. The results show that the magnetic coupling can be treated by the two-dimensional Ising model, and it can be interpreted on the basis of a crystal-field effect.     

丝瓜种子萌芽及子叶生长过程中谷氨酰胺合成酶同工酶的变化

测定了丝瓜种子萌芽及子叶不同生长阶段的谷氨酰胺合成酶(GS)的活性及其同工酶的变化．除了发育上的变化外，光和外源氮对GS活性及其同工酶影响也是显著的．无论外源氮(N)是否存在，GS活性在种子萌芽和子叶生长初期是逐渐升高的，于第6天达到最大，其后活性逐步降低．在光照下，外源氮对GS1诱导作用大于GS2；在无氮下，光对GS2的刺激大于GS1；在暗处，外源氮对GS1和GS2两者都有诱导作用．     

Metallo‐supramolecular micelles: Studies by analytical ultracentrifugation and electron microscopy

In aqueous solutions, amphiphilic block copolymers in which a polystyrene (PS) segment is connected to a poly(ethylene oxide) (PEO) block via a bis(2,2′:6′,2″‐ terpyridine ruthenium) complex can form micelles. Such micelles of the protomer type PS₂₀‐[Ru]‐PEO₇₀, according to the preparation procedure representing frozen micelles, were studied by sedimentation velocity and sedimentation equilibrium analysis in an analytical ultracentrifuge and by transmission electron microscopy, with different techniques applied for the sample preparation. The particles obtained were surprisingly multifarious in size. In ultracentrifugation experiments performed at relatively low salt concentrations, the distributions of the sedimentation coefficient s_20,w showed a pronounced peak at 9.6 S and a broad, only partly separated second peak around 14 S. The molar mass of the particles at the peak was around 430,000 g/mol, corresponding to an aggregation number of approximately 85. The average hydrodynamic diameter of the particles in the peak fraction was approximately 13 nm. In electron micrographs of negatively stained samples, spheres of diameters between 10 and 25 nm were the most abundant particles, but larger ones with a wide size range were also visible. The latter particles apparently were composed of smaller ones. The data from both sedimentation analysis and electron microscopy showed that (1) the studied compound formed primary micelles of diameters around 20 nm and (2) the primary micelles had a tendency toward aggregation. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3159–3168, 2003     

Direct, organocatalytic α-sulfenylation of aldehydes and ketones

A method for direct sulfenylation of aldehydes and ketones, catalyzed by a novel pyrrolidine trifluoromethanesulfonamide organocatalyst, has been developed. This process serves as an efficient and mild approach to the preparation of α-phenylthio-ketones and -aldehydes.     

SURFACE METALLIZATION OF CENOSPHERES AND PRECIPITATORS BY ELECTROLESS PLATING

This paper reports the use of a colloidal Pd^0 catalysis system to metallize the surface of precipitators separated from coal fly-ash, and metals such as Cu, Ni etc. are deposited on the precipitators surface. Alternatively, according to the characteristic surface of cenospheres, an Ag coating catalysis system is adopted to first deposit Ag on the cenospheres surface, followed, if necessary, by the deposition of other metals such as Cu, Ni, etc. on the Ag coating to produce monolayer and multilayer metal-coated cenospheres. The surface characteristics and the morphologies of the metal coatings are examined in detail with scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) techniques. It can be shown that the quality of metal coatings derived from the Aa coatina catalysis system, is better than that of the colloidal Pd^0 catalysis system.     

Surface roughness investigation of semi-conductor wafers

Conventionally, surface roughness is predominantly determined through the use of stylus instruments. However, there are certain limitations involved in the method, particularly when a test specimen, such as a silicon wafer, has a smooth mirror-like surface. Hence, it is necessary to explore alternative non-contact techniques. Light scattering has recently been gaining popularity as an optical technique to provide prompt and precise inspection of surface roughness. In this paper, the total integrated scattering (TIS) model is modified to retrieve parameters on surface micro-topography through light scattering. The applicability of the proposed modified TIS model is studied and compared with an atomic force microscope. Experimental results obtained show that the proposed technique is highly accurate for measuring surface roughness in the nanometer range.     

用于高数值孔径物镜的可调光瞳滤波器

根据矢量衍射理论，提出了一种用于提高高数值孔径显微物镜纵向分辨率的可调二元环形光瞳滤波器，通过改变滤波器的环半径获得不同的纵向分辨率，并利用共焦显微术点扩散函数的乘积性大大地降低了旁瓣相对主瓣的比值。模拟结果表明，这种新型滤波器不仅可以提高高数值孔径物镜的纵向分辨率，同时基本上不影响横向分辨率。