A copper‐based reverse atom‐transfer radical polymerization process for the living radical polymerization of polyacrylonitrile

The reverse atom‐transfer radical polymerization (RATRP) technique using CuCl₂/2,2′‐bipyridine (bipy) complex as a catalyst was applied to the living radical polymerization of acrylonitrile (AN). A hexasubstituted ethane thermal iniferter, diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS), was firstly used as the initiator in this copper‐based RATRP initiation system. A CuCl₂ to bipy ratio of 0.5 not only gives the best control of molecular weight and its distribution, but also provides rather rapid reaction rate. The rate of polymerization increases with increasing the polymerization temperature, and the apparent activation energy was calculated to be 57.4 kJ mol^?1. Because the polymers obtained were end‐functionalized by chlorine atoms, they were used as macroinitiators to proceed the chain extension polymerization in the presence of CuCl/bipy catalyst system via a conventional ATRP process. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 226–231, 2006     

Synthesis of polyacrylonitrile via reverse atom transfer radical polymerization catalyzed by FeCl3/isophthalic acid

FeCl₃ coordinated by isophthalic acid was first used as a catalyst in the azobisisobutyronitrile‐initiated reverse atom transfer radical polymerization of acrylonitrile. N,N‐Dimethylformamide was used as a solvent to improve the solubility of the ligand. An FeCl₃‐to‐isophthalic acid ratio of 0.5 not only gave the best control of the molecular weight and its distribution but also provided rather a rapid reaction rate. The effects of different solvents on the polymerization of acrylonitrile were also investigated. The rate of the polymerization in N,N‐dimethylformamide was faster than that in propylene carbonate and toluene. The molecular weight of polyacrylonitrile agreed reasonably well with the theoretical molecular weight in N,N‐dimethylformamide. The rate of polymerization increased with increasing polymerization temperature, and the apparent activation energy was calculated to be 59.9 kJ mol^?1. Reverse atom transfer radical polymerization was first used to successfully synthesize acrylonitrile polymers with a molecular weight higher than 80,000 and a narrow polydispersity as low as 1.22. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 219–225, 2006     

Enhanced transmission of electromagnetic waves through metamaterials

This paper reviews our recent experimental and simulation results regarding the electromagnetic wave transmission through three configurations of sandwiching structures of metamaterials: a metallic mesh sandwiched between two identical layers composed of split rings, metallic fractals, and fractal slits, respectively. We observed the enhanced transmission of the waves through these three types of sandwiching composites with respect to the opaque metallic mesh. The locations of the transmission peaks in the spectrum are associated closely with the band characteristics of the sandwiching layer by appearing either on the left- or the right-hand side of its band. PACS 41.20.Jb; 42.70.Qs; 78.20.-e; 42.25.Bs; 47.53.+n     

准直小孔法自动调焦在激光直写入系统中的应用

本文介绍了一种新的自动调焦方法准直小孔法.对自动调焦的原理和后继电路处理方法作了详细的分析.它具有响应时间短、灵敏度高,能够很好的在激光直接写入系统中克服物镜工作台运动中导轨的不平和轴向窜动所造成的离焦。     

Amperometric flow-injection analysis of hydrazine by electrocatalytic oxidation at cobalt tetraphenylporphyrin modified electrode with heat treatment

Chemically modified electrodes prepared by treating the cobalt tetraphenylporphyrin modified glassy-carbon electrode at 750 degrees (HCME) are shown to catalyze the electrooxidation of hydrazine. The oxidation occurred at +0.63 V vs. Ag/AgCl (saturated potassium chloride) in pH 2.5 media. The catalytic response is evaluated with respect to solution pH, potential scan-rate, concentration dependence and flow-rate. The catalytic stability of the HCME is compared with that of the cobalt tetraphenylporphyrin adsorbed glassy-carbon electrode. The stability of the HCME was excellent in acidic solution and even in solutions containing organic solvent (50% CH(3)OH). When used as the sensing electrode in amperometric detection in flow-injection analysis, the HCME permitted sensitive detection of hydrazine at 0.5 V. The limit of detection was 0.1 ng. The linear range was from 50 ng to 2.4 mug. The method is very sensitive and selective.     

多孔硅的电化学制备

单晶硅在氢氟酸溶液中阳极氧化可制得多孔硅, 多孔硅是一种以新形态存在的硅, 与单晶硅相比, 它表现出独特的物理性质和化学活性。荧光光谱峰的蓝移表明, 在p-型低掺杂衬底硅上形成的多孔硅中存在量子尺寸效应, 新近获得的Raman光谱也证实了这一点。     

合成1，3－二（3－羟丙基）四甲基二硅氧烷的新方法

用二乙氧基二甲基硅烷与３－氯丙醇反应，合成了新化合物３－氯丙氧基乙氧基二甲基硅烷，然后用格氏反应代替Ｗａｌｔｅｒ的钠缩合反应，最后经水解制备了１，３－二（３－羟丙基）四甲基二硅氧烷，总收率为４２．０％。     

Rapid Fabrication of Hollow SiO2 Spheres with Novel Morphology

The hydrolysis of tetraethoxysilane (TEOS) occurred on the surface of poly(methyl methacrylate) (PMMA) microshperes immediately after these microshperes were prepared in TEOS. Micron-sized hollow SiO2 spheres were obtained by calcination of the coated PMMA microshperes. It was found that the final hollow spheres were constituted by small SiO2 particles.     

Hypervalent Iodine(III) Sulfonate Mediated Synthesis of Imidazo[1,2‐a]pyridines

A direct and efficient method for the conversion of alkyl aryl ketones to imidazo[1,2‐α]pyridines has been developed based on initial formation of α‐organosulfonyloxy ketones and their subsequent cyclocondensation by 2‐aminopyridines in one‐pot conditions.