Zn(NO_3)_2·6H_2O/2,4,6-trichloro-1,3,5-triazine(TCT) a mild and selective system for nitration of phenols

<正>Certain phenols and naphthols were nitrated regioselectively with Zn(NO_3)_2·6H_2O/TCT in acetonitrile as solvent at room temperature and short reaction time in good yields.The reaction condition was mild.TCT is a cheap and commercially available reagent.It performed as an acid catalyst in this transformation.     

Selective monotetrahydropyranylation of symmetrical diols using P_20_5/Si0_2 under solvent-free conditions and their depyranylation

Selective protection of one of the hydroxyl group in 1,n-symmetrical diols is achieved by P_2O_2/SiO_2-catalyzed reaction of the diol with dihydropyran under solvent-free conditions at room temperature.This selective protection is simple and it occurred under economically cheap conditions in high yield.The deprotected diol is simply obtained by refluxing of this compound in methanol using the same catalyst without any byproduct formation or additional purifications.     

Design and characteristics of tin (II) optode based on immobilization of dithizone on a triacetylcellulose membrane and its application in canned foods

Abstract  

The characterization of an optical sensor membrane is described for the determination of tin (II) based on the immobilization of dithizone on a triacetylcellulose membrane. The membrane responds to tin (II) ions by changing color reversibly from green to red in buffer solution at pH 6 and wavelength 611 nm. This optode has a linear range of 0.3–6.33 μg cm⁻³ (2.52–53.32 μmol dm⁻³) of Sn²⁺ ions with a limit of detection of 0.15 μg cm⁻³ (1.26 μmol dm⁻³). The response time of the optode was about 8–10 min depending on the concentration of Sn²⁺ ions. The selectivity of the optode to tin (II) ions at pH 6 was good. The sensor can be readily regenerated by exposure with EDTA solution. The color is fully reversible, and the optical sensor could be fully regenerated. Experimental results showed that the optode could be used as an effective tool in analyzing the tin content in canned foods.     

Supported Preyssler Nanoparticles in Synthesis of 1,3‐Diaryl‐5‐Spirohexahydropyrimidines

Silica‐supported Preyssler nanoparticles (H₁₄[NaP₅W₃₀O₁₁₀])/SiO₂ are used as a new and recyclable catalyst for the preparation of 1,3‐diaryl‐5‐spirohexahydropyrimidines via a one‐pot condensation of anilines, formaldehyde, and cyclohexanone.     

Phase behavior study of poly(N‐tertbutylacrylamide‐co‐acrylamide) in the mixture of water–methanol: The role of polymer–nonsolvent second‐order interactions

The phase behavior of poly(N‐tertbutylacrylamide‐co‐acrylamide) (PNTBAM) in pure water and mixture of water–methanol is studied at different temperatures. The different compositions of PNTBAM are prepared by free‐radical polymerization technique and their phase behavior is studied by turbidimetry. The effects of copolymer and solvent composition on the phase behavior of the copolymers are discussed. It has been suggested that the inhomogenities in polymer chains are responsible for lowering the rate of phase transition by increasing the N‐tertbutylacrylamide (NTBAM) and methanol contents in copolymer and mixture, respectively. For the first time we have revealed that there are second‐order binary interactions in the water–methanol which are dominant in the special range of copolymer composition. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 455–462, 2009     

Microwave-assisted Oxidation of Alcohols and Polyarenes with Cetyltrimethylammonium Bromochromate

An efficient and mild methodology for oxidation of alcohols and polyarenes was described using cetyltrimethylammonium bromochromate (CTMABC) under microwave irradiation. Primary and secondary alcohols and polyarenes could be selectively oxidized under microwave irradiation into the corresponding aldehydes and ketones in high yields and short reaction time, using commercially available and magnetically retrievable oxidative material (CTMABC).     

Effects of fiber diameter and CO2 activation temperature on the pore characteristics of polyacrylonitrile based activated carbon nanofibers

The effects of fiber diameter and activation temperature on the pore characteristics of polyacrylonitrile based activated carbon nanofibers are investigated. It was found that lower fiber diameters as well as higher activation temperatures lead to a higher weight loss, specific surface area and total pore volume. The nitrogen adsorption capacity of activated carbon nanofibers is almost three times that of activated carbon fiber with a diameter of 10 µm. As far as the size of pores in activated carbon nanofibers is concerned, it is basically the micropores that dominate the scene. Moreover, tailoring the pore characteristics by adjusting the activation temperature and fiber diameter is plausible. Copyright © 2009 John Wiley & Sons, Ltd.     

Extended Lattice Boltzmann Model

Conventional lattice Boltzmann models for the simulation of fluid dynamics are restricted by an error in the stress tensor that is negligible only for small flow velocity and at a singular value of the temperature. To that end, we propose a unified formulation that restores Galilean invariance and the isotropy of the stress tensor by introducing an extended equilibrium. This modification extends lattice Boltzmann models to simulations with higher values of the flow velocity and can be used at temperatures that are higher than the lattice reference temperature, which enhances computational efficiency by decreasing the number of required time steps. Furthermore, the extended model also remains valid for stretched lattices, which are useful when flow gradients are predominant in one direction. The model is validated by simulations of two- and three-dimensional benchmark problems, including the double shear layer flow, the decay of homogeneous isotropic turbulence, the laminar boundary layer over a flat plate and the turbulent channel flow.