Tricin isolated from Allium atroviolaceum potentiated the effect of docetaxel on PC3 cell proliferation: role of miR-21

For more effectiveness and overcoming the drug resistance Chemotherapy agents, the combination treatment is raised. Flavonoids with different anti-cancer effects are an appropriate choice as lead compounds. Over expressed MiR-21 in prostate cancer is associated with metastasis and drug resistance to chemotherapy with Docetaxel. In this study, the anticancer effect of 4′, 5, 7-Trihydroxy-3′, 5′-dimethoxyflavone (Tricin) was investigated with Docetaxel on PC3 cell line. Tricin was initially isolated from the Allium atroviolaceum by column chromatography and recrystallization method. The chemical structure of isolate was elucidated by spectroscopic techniques. IC₅₀ of Tricin and Docetaxel were assessed 117.5 ± 4.4 μM and 0.1 ± 0.02 nM by MTT assay, respectively. Analysis of results indicates the synergistic effect of combination therapy on decreased proliferation. MiR-21 in treated cells with Tricin significantly decreased compared to control cells. So, Tricin can be effective in the reduction of metastasis and drug resistance of Docetaxel.     

Optimization of the Co–Pi/α-Fe2O3 Catalyst Synthesis Parameters Using the Taguchi Method for Water-Splitting Application

Russian Journal of Electrochemistry - The use of hematite as a photoanode has been limited due to its optoelectronic properties and a large overpotential for photo-assisted water splitting. In this...     

Recent developments of metallic nanoparticles and their catalytic activity in organic reactions

During the last two decades, with the development of nanotechnology, various nanomaterials have been designed and generated. Among them, hybrid organic–inorganic nanoparticles as a particular immobilizing carrier of the catalyst active sites have shown an important contribution in the current research studies. This is due to the large area and loads of active sites. This prominent review is focused on the novel various exa about the immobilization of nanoparticles with organic compounds as versatile and efficient catalysts in organic syntheses.     

Design,preparation, and characterization of Fe3O4 nanoparticles encapsulating β-cyclodextrin-bearing guanidine as a highly efficient and reusable heterogeneous base catalyst for synthesis of 3,4-dihydropyrano[3,2-c]chromenes

Chromene substructure is an important structural motif present in a variety of medicines, natural products, and materials showing biological activities. Here, a simple and convenient procedure for the synthesis of 3,4-dihydropyrano[3,2-c]chromene derivatives is described. For this purpose, Fe₃O₄ nanoparticles supported on β-cyclodextrin-guanidine were successfully prepared and used as catalyst. The structure of this catalyst was assigned by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, thermal gravimetric analysis, and vibrating sample magnetometer techniques. The prepared nanocomposites were used as a highly active, heterogeneous, and reusable nanocatalyst for the one-pot, three-component reaction of 4-hydroxycoumarin, aromatic aldehydes, and ethyl cyanoacetate. This method has advantages such as mild conditions, high yields, easy workup and simple purification of products, little catalyst loading, cost efficiency, and reusability of the catalyst.     

Effective one-pot synthesis of tetrahydrobenzo[b]pyran derivatives using nickel Schiff-base complex immobilized on iron oxide nanoparticles

Nickel Schiff-base complex immobilized on silica-coated Fe₃O₄ as a heterogeneous catalyst was designed and characterized by different techniques, such as Fourier transform infrared (FT-IR), X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), inductively coupled plasma (ICP) and vibrating sample magnetometry (VSM) thermogravimetric analysis (TGA), and Brunauer–Emmett–Teller (BET). The synthesized nanocatalyst has been explored as a new and efficient recyclable heterogeneous catalyst for the one-pot three-component synthesis of tetrahydrobenzo[b]pyran derivatives. The reaction proceeds smoothly to supply the respective products in excellent yields and low reaction times. The catalyst can be easily recovered by a magnetic field and reused for eight consecutive reaction cycles without significant loss of activity.     

The lithiation studies of nanostructured tungsten oxide film prepared via electrochemical precipitation

In this work, nanostructured tungsten oxide was electrodeposited by cyclic voltammetric technique onto a stainless steel surface. The structure and surface morphology of the resulting oxide film were characterized by means of X-ray diffraction, scanning probe microscopy, and scanning electron microscopy. The electrochemical intercalation of lithium into the nanostructured tungsten oxide was studied using cyclic voltammetry, galvanostatic charge–discharge curves, and electrochemical impedance spectroscopy in a liquid electrolyte consisting of 1 M LiClO₄ in propylene carbonate. The as-deposited tungsten oxide indicated the capacity for electrochemical lithium insertion. The specific capacitance of 108.05 F?g^?1 was obtained at the constant discharge density of 0.07 mA?cm^?2.     

Spherically Symmetric Jordan-Brans-Dicke Quantum Gravity with de Broglie Bohm Pilot Wave Perspective

We obtain two dimensional analogue of the Jordan-Brans-Dicke (JBD) gravity action described in four dimensional spherically symmetric curved space time metric. There will be two scalar fields, namely, the Brans Dicke (BD) ? and scale factor of 2-sphere part of the space time ψ. We obtained suitable duality transformations between (ψ, ?) and (ρ, S) where ρ and S is respectively amplitude and phase part of the corresponding de Broglie pilot wave function \(\Psi (\rho ,S)=\sqrt {\rho }e^{iS}.\) Covariant conservation of mass-energy current density of particles ensemble J _a = ρ? _a S, is established by applying a particular dynamical conformal frame described by (ρ, S).     

Natural convection in a square cavity containing a nanofluid and an adiabatic square block at the center

The problem of free convection fluid flow and heat transfer of Cu–water nanofluid inside a square cavity having adiabatic square bodies at its center has been investigated numerically. The governing equations have been discretized using the finite volume method. The SIMPLER algorithm was employed to couple velocity and pressure fields. Using the developed code, a parametric study was conducted and the effects of pertinent parameters such as Rayleigh number, size of the adiabatic square body, and volume fraction of the Cu nanoparticles on the fluid flow and thermal fields and heat transfer inside the cavity were investigated. The obtained results show that for all Rayleigh numbers with the exception of Ra = 10⁴ the average Nusselt number increases with increase in the volume fraction of the nanoparticles. At Ra = 10⁴ the average Nusselt number is a decreasing function of the nanoparticles volume fraction. Moreover at low Rayleigh numbers (10³ and 10⁴) the rate of heat transfer decreases when the size of the adiabatic square body increases while at high Rayleigh numbers (10⁵ and 10⁶) it increases.     

Excess Molar Enthalpies of Monoethanolamine (MEA) + Primary Alkan-1-ols (C3–C6) and their Fitting with Wilson,NRTL and UNIQUAC Models at 298.15 K

Journal of Solution Chemistry - Excess molar enthalpies, $${H}_{text{m}}^{text{E}}$$ of binary mixtures of monoethanolamine (MEA) with propan-1-ol, butan-1-ol, pentan-1-ol and hexan-1-ol were...     

Stick-slip of the three-phase line in measurements of dynamic contact angles

Contact angles of a series of n-alkanes (i.e., n-heptane to n-hexadecane) are studied on two functionalized maleimide copolymers (i.e., poly(ethene-alt-N-(4-(perfluoroheptylcarbonyl)aminobutyl)maleimide) (ETMF) and poly(octadecene-alt-N-(4-(perfluoroheptylcarbonyl)aminobutyl)maleimide) (ODMF)). On the homogeneous ETMF films, all liquids show a smooth motion of the three-phase line. In contrast, on ODMF surfaces that are found to consist of mainly fluorocarbons and small patches of hydrocarbons, short-chain n-alkanes show a stick-slip pattern. By increasing the chain length of the probe liquids, stick-slip is reduced significantly. The phenomenon is discussed in the framework of the Cassie equation. It is found that the upper limit of contact angles in the stick-slip pattern is given by the advancing angle that would be obtained on the pure fluorocarbon surface, whereas the lower limit of the stick-slip pattern is given by the Cassie angle.