A unique path to reach thermostable polypyrrole/Pd microfibers via chemical oxidative polymerization

Polypyrrole/palladium (PPy/Pd) nanocomposites, labeled by PPy/Pd-2/1-0, PPy/Pd-2/1-25, and PPy/Pd-3/1-0, are synthesized via a direct redox reaction between pyrrole monomer and PdCl₂ in the presence of sodium dodecyl sulfate (SDS) stabilizer in chloroform (CHCl₃)/acetonitrile (CH₃CN) binary organic solvents with 2:1 and 3:1 volume ratios at two temperatures involving 0 and 25 °C. A Pd-unloaded polypyrrole (PPy-2/1-0) is also synthesized similarly using iron(III) chloride (FeCl₃) oxidant for comparison purposes. The volume ratio of the solvents used as well as the temperature at which the oxidative polymerization takes place affects significantly the thermostability of the resulting nanocomposites. According to the thermogravimetric analyses, the stability order towards heat is found to be PPy/Pd-2/1-25?>?PPy/Pd-2/1-0?>?PPy/Pd-3/1-0?>?PPy-2/1-0. The nanocomposite PPy/Pd-2/1-25 shows clearly more thermostability compared to PPy/Pd-2/1-0 analog at temperatures above 400 °C. Furthermore, whereas three discrete maxima can be obviously found in the differential thermal analysis (DTA) thermogram of PPy-2/1-0 pure sample, no distinctive exothermic peak is observed in the curves of the three Pd-loaded nanocomposites.     

Thermodynamic Consistency Test of Vapor–liquid Equilibrium Data of Binary Systems Including Carbon Dioxide (CO 2 ) and Ionic Liquids Using the Generic Redlich–Kwong Equation of State

The thermodynamic consistency test of solubility P–T–x data for binary mixtures including carbon dioxide (CO2) + a room temperature ionic liquid has been investigated. Experimental solubility data taken from the open literature for 32 binary mixtures of CO2/RTILs contains 80 isotherms. The applied consistency test is based on the fundamental Gibbs–Duhem equation with use of the generic Redlich–Kwong (GRK) equation of state (EoS) coupled with the van der Waals–Berthelot (GRK/vdWB) mixing rule. The optimum parameters were obtained by minimizing the summation of per cent relative deviations between modeled and experimental data, based on the bubble pressure algorithm. Modeling was found acceptable for all isotherms, which demonstrated the usability of the GRK equation of state. Results of the thermodynamic consistency test showed that 36 of the isothermal data sets were thermodynamically consistent, 37 were not fully consistent, 6 were thermodynamically inconsistent and only one data set was found to need another model.     

A comparative DFT study of Fe3+ and Fe2+ ions adsorption on (100) and (110) surfaces of pyrite: An electrochemical point of view

Pyrite acts as a catalyst in the mineral processing, and the speed of ferric ion reduction and mineral decomposition increases with increasing cathodic points. In this study, the ferric ion interaction on the (100) and (110) surfaces of pyrite was studied using the density functional theory calculations. The analysis of stability, density of states, and electron density were performed to understand the interaction between the ferric ion and pyrite surfaces. The results showed that pyrite surface is chemically active and tends to absorb ferric ion between two surface sulfur atoms. The hyperconjugation between the 3d orbital of ferric ion and the 3p or 3d orbitals of surface atoms provides the conditions for the Fe³⁺ ion adsorption. The molecular orbital (MO) and electron density analyses indicate that the 3p orbitals of S atoms play a more important role in bonds formations relative to the 3d orbitals. The (110) surface is more active, and the adsorption energy is larger than that of surface (100), which is the result of decreased cation coordination and the presence of sulfur at the surface. Subsequently, the interaction of the Fe²⁺ ion, as product of Fe³⁺ ion reduction and its competitor for adsorption, on the surfaces was studied. The Fe^{2 +} ion adsorbs stronger at the surface of (110), and the adsorption energies at (100) and (110) surfaces were obtained as −24 and −47 kcal/mol, respectively. In general, the Fe³⁺ ion is a stronger oxidizing agent than Fe²⁺ on pyrite surfaces.     

Green,rapid, and highly efficient syntheses of α,α′-bis[(aryl or allyl)idene]cycloalkanones and 2-[(aryl or allyl)idene]-1-indanones as potentially biologic compounds via solvent-free microwave-assisted Claisen–Schmidt condensation catalyzed by MoCl5

A new, green, and highly efficient protocol for the expeditious preparation of some α,α′-bis[(aryl or allyl)idene]cycloalkanones and 2-[(aryl or allyl)idene]-1-indanones via a simple microwave-assisted Claisen–Schmidt condensation reaction catalyzed by MoCl₅ was successfully developed. Outstanding features of the current methodology include the use of solvent-free conditions, simple operation, use of a very inexpensive and available catalyst, low catalyst loading, short reaction times, high yields of the pure products, no harmful by-products, easy workup, and also the applicability of microwave irradiation as a clean source of energy. Furthermore, a gram-scale reaction was successfully conducted, proving the scalability of this current Claisen–Schmidt condensation reaction.     

Assessment of Thermal Stability and Detonation Performance of 4-Amino-1,2,4-triazolium Nitrate as compared to 2,4,6-Trinitrotoluene for Melt-cast Explosives

4-Amino-1,2,4-triazolium nitrate (4-ATN) is an energetic and non-sensitive ionic liquid, which was introduced as a good candidate in previous works for the replacement of 2,4,6-trinitrotoluene (TNT) in melt-cast explosives. Since previous studies used pure nitric acid for nitration of 4-ATN, the effect of the use of low price industrial nitric acids (50 %, 70 % and 98 %) is investigated on the percent yields of 4-ATN. The thermogravimetric and differential scanning calorimetry (TGA/DSC) are done on the synthesized 4-ATN with impure nitric acid at a heating rate of 10 K · min^–1 by the vacuum system. The obtained TGA/DSC curves confirm decomposition of 4-ATN involving melting and dissociation. Derivative thermogravimetric (DTG) curves of 4-ATN at various heating rates are applied to obtain activation energy of thermolysis by several model-free techniques. The calculated activation energies are in the range 78.7–87.7 kJ · mol^–1, which are about 10 kJ · mol^–1 more than the reported activation energy of industrial TNT (purity 98.2 %), i.e. 66–70 kJ · mol^–1. Assessments of detonation performance of 4-ATN are also compared with TNT, which show higher detonation performance of 4-ATN. Thus, 4-ATN can be used with nitramine compounds as melt-cast explosives with higher thermal stability and detonation performance than corresponding nitramine compound/TNT explosives.     

Trimesic acid is a suitable building block in triple four-component Ugi reaction: access to unique trivalent compounds

Monatshefte für Chemie - Chemical Monthly - A triple four-component Ugi reaction of isocyanide, amine, aldehyde, and trimesic acid as the acid component with three acidic functional groups in...     

A simple,rapid and effective protocol for synthesis of bis(pyrazolyl)methanes using nickel–guanidine complex immobilized on MCM-41

Research on Chemical Intermediates - In this paper, a rapid, easy and very efficient method for the synthesis of bis(pyrazolyl)methanes has been reported in the presence of nickel–guanidine...     

Water treatment: functional nanomaterials and applications from adsorption to photodegradation

Global efforts for engineering desired materials which are able to treat the water sources still are ongoing in the bench level methods. Considering adsorbent and photocatalytic materials as the main reliable candidates still are encountering with struggles because of many challenges that restrict their large-scale application. This review comprehensively considered the recent advanced materials water treatment methods which involve to magnetic, activated carbon, carbon nanotubes (CNTs), graphene (G), graphene oxide (GO), (Graphene) quantum dots, carbon nanorods, carbon nano-onions, and reduced graphene oxide (RGO), zeolite, silica and clay-based nanomaterials. The adsorption and photocatalytic properties of these nanomaterials introduced them as highly potent option for heavy metal ions and organic dyes removal and photocatalytic degradation. High specific surface area in conjugation with presenting higher kinetics of adsorption and decomposition are the main characteristics of these materials which make them appropriate to treat wastewater even in ultralow concentration of the pollutants. Considering the mechanistic aspects of the adsorption and photocatalytic decomposition process, challenges and opportunities were other subjects that have been highlighted for the discussed nanomaterials. In term of the adsorption approaches, the mechanism of adsorptions and their influence on the maximum adsorption capacity were discussed and also for photocatalyst approach the radical active spices and their role in kinetic and efficiency of the organic pollutant decomposition were provided a deep discussion.     

4-Oxobenzo[d]1,2,3-triazin-pyridinium-phenylacetamide derivatives as new anti-Alzheimer agents: design,synthesis, in vitro evaluation,molecular modeling,and molecular dynamic study

Structural Chemistry - A new series of 4-oxobenzo[d]1,2,3-triazin-pyridinium-phenylacetamide hybrids 8a–p was designed, synthesized, and screened as the potential cholinesterase inhibitors...     

Heat transfer enhancement in a counter-flow sinusoidal parallel-plate heat exchanger partially filled with porous media using metal foam in the channels’ divergent sections

Journal of Thermal Analysis and Calorimetry - This is a numerical study of heat transfer and flow in a counter-flow sinusoidal parallel-plate heat exchanger using metal foam in the channels’...