In vitro bioactivity of essential oils and methanol extracts of Salvia reuterana from Iran

The chemical composition of the essential oils, antioxidant activity (DPPH and beta-carotene/linoleic acid assays) and total phenolic content (Foline-Ciocalteu) of the flowers and leaves of Salvia reuterana were determined. Essential oils extracted from the flowers and leaves by hydrodistillation were analyzed by GC and GC/MS. Forty-four constituents, representing 99.7-99.9% of the oils, were identified. The major components were germacrene D, benzoic acid hexyl ester, bicyclogermacrene, beta-gurjunene and ishwarene, constituting 33.7-31.9% of the oils. The highest radical-scavenging activity (DPPH test) was shown by the methanol extract of the flowers (IC50 = 77.6 microg/mL). In the beta-carotene/linoleic acid assay, the methanol extract of the leaves showed the highest inhibition (40.3%) which was only slightly lower than that shown by BHT (82.9%). The total phenolic contents of the methanol extracts of the flowers and leaves as gallic acid equivalents were 81.4 and 88.3 microg/mg, respectively. The plant also showed good antimicrobial activity against three strains of tested microorganisms.     

Determination of complex modes in photonic crystal waveguides using the phase variation in characteristic coefficients

An efficient frequency-domain method, the phase variation monitoring (PVM) method, is proposed to determine the electromagnetic eigenmodes in two-dimensional photonic crystal waveguides. The proposed method is based on monitoring the reflection and transmission coefficients of incident plane waves. It is successfully applied to an illustrative line-defect photonic crystal waveguide and proved to be capable of calculating the in-plane leakage through the finite-size photonic crystal surrounding the line-defect. Calculation of the leakage loss is not only important for proper understanding of wave propagation within the defect but also for its significant role in applications of photonic structures.     

Tautomerism,dynamic properties and level crossing in 2‐(pyridin‐2‐yl) furan‐3‐ol by density functional theory and natural bond orbital analysis

2‐(Pyridin‐2‐yl)furan‐3‐ol (PYFO, T1) and (2E)‐2‐(pyridin‐2(1H)‐ylidene)furan‐3(2H)‐one (PYFO, T2) were considered to study their tautomerism interconversions, relative rotations of rings, OH bond rotations, and possibility of crossing between those energy surfaces using density functional theory methods at the Becke, three‐parameter, Lee–Yang–Parr/6‐311++G** level of theory. The optimized structures of both tautomers and the transition state of tautomerism are completely planar. A study of tautomerism in PYFO shows that T1 tautomer is about 24.38 kJ/mol more stable than T2. The rate constants of tautomerism interconversion for converting T1 to T2 is 1.98 × 10⁸ M^–1 s^–1 and for converting T2 to T1 is 3.70 × 10¹² M^–1 s^–1 at room temperature that show the possibility of this tautomerism with high rate at ambient temperature. Rotation of OH bond in T1 shows two minimum (at 0° (global minimum) and 180° (local minimum)) and a transition state at 110° (and 265°) with 47.10 kJ/mol barrier energy. Relative rotation of rings shows global minimum at 0° for both tautomers and local minimum at 154° and 206° for T1 and 180° for T2. The barrier energy for ring rotation of T1 was observed at 90° and 270° with 63.69 kJ/mol height and for T2 was observed at 120 with 170.86 kJ/mol height. Interestingly, the energy levels of ring rotations for T1 and T2 are the same and crossing between them was observed. Therefore, although these two potentials do not have the same symmetries, because of the crossing between their energy level, crossing is not avoided. Copyright © 2011 John Wiley & Sons, Ltd.     

Ultrasound-assisted synthesis of aromatic 1,2-diketones from oximinoketones under neutral conditions in aqueous media

We report a convenient, neutral, and facile methodology for the synthesis of aromatic 1,2-diketones from the corresponding oximinoketones in the presence of I₂/SDS/water system under ultrasound-assisted conditions. Furthermore, a series of compounds were synthesized and characterized by melting point, IR, NMR, MS, and elemental analysis. Utilization of easy reaction conditions, very high to excellent yields, and short reaction times makes this manipulation potentially very useful.     

Ultrasound-promoted an efficient method for one-pot synthesis of 2-amino-4,6-diphenylnicotinonitriles in water: a rapid procedure without catalyst

A green and convenient approach to the synthesis of 2-amino-4,6-diphenylnicotinonitriles via four-component reaction of malononitrile, aromatic aldehydes, acetophenone derivatives and ammonium acetate in water under ultrasound irradiation is described. The combinatorial synthesis was achieved for this methodology with applying ultrasound irradiation while making use of water as green solvent. In comparison to conventional methods, experimental simplicity, good functional group tolerance, excellent yields, short routine, and selectivity without the need for a transition metal or base catalyst are prominent features of this sonocatalyzed procedure.     

The effect of ultrasound irradiation on the convective heat transfer rate during immersion cooling of a stationary sphere

It has been proven that ultrasound irradiation can enhance the rate of heat transfer processes. The objective of this work was to study the heat transfer phenomenon, mainly the heat exchange at the surface, as affected by ultrasound irradiation around a stationary copper sphere (k=386W m(-1)K(-1), C(p)=384J kg(-1)K(-1), ρ=8660kg m(-3)) during cooling. The sphere (0.01m in diameter) was immersed in an ethylene glycol-water mixture (-10°C) in an ultrasonic cooling system that included a refrigerated circulator, a flow meter, an ultrasound generator and an ultrasonic bath. The temperature of the sphere was recorded using a data logger equipped with a T-type thermocouple in the center of the sphere. The temperature of the cooling medium was also monitored by four thermocouples situated at different places in the bath. The sphere was located at different positions (0.02, 0.04 and 0.06m) above the transducer surface of the bath calculated considering the center of the sphere as the center of the reference system and was exposed to different intensities of ultrasound (0, 120, 190, 450, 890, 1800, 2800, 3400 and 4100W m(-2)) during cooling. The frequency of the ultrasound was 25kHz. It was demonstrated that ultrasound irradiation can increase the rate of heat transfer significantly, resulting in considerably shorter cooling times. Higher intensities caused higher cooling rates, and Nu values were increased from about 23-27 to 25-108 depending on the intensity of ultrasound and the position of the sphere. However, high intensities of ultrasound led to the generation of heat at the surface of the sphere, thus limiting the lowest final temperature achieved. An analytical solution was developed considering the heat generation and was fitted to the experimental data with R(2) values in the range of 0.910-0.998. Visual observations revealed that both cavitation and acoustic streaming were important for heat transfer phenomenon. Cavitation clouds at the surface of the sphere were the main cause of heating effect. The results showed that closer distances to the transducer surface showed higher cooling rates. On the other hand, despite having a bigger distance from the transducer, when the sphere was located close to the gas-liquid interface the enhancement factor of heat transfer was higher. Ultrasound irradiation showed promising effect for the enhancement of convective heat transfer rate during immersion cooling. More investigations are required to demonstrate the behavior of ultrasound assisted heat transfer and resolve the proper way of the application of ultrasound to assist the cooling and/or freezing processes.     

Investigation of the effect of power ultrasound on the nucleation of water during freezing of agar gel samples in tubing vials

Nucleation, as an important stage of freezing process, can be induced by the irradiation of power ultrasound. In this study, the effect of irradiation temperature (−2 °C, −3 °C, −4 °C and −5 °C), irradiation duration (0 s, 1 s, 3 s, 5 s, 10 s or 15 s) and ultrasound intensity (0.07 W cm⁻², 0.14 W cm⁻², 0.25 W cm⁻², 0.35 W cm⁻² and 0.42 W cm⁻²) on the dynamic nucleation of ice in agar gel samples was studied. The samples were frozen in an ethylene glycol-water mixture (−20 °C) in an ultrasonic bath system after putting them into tubing vials. Results indicated that ultrasound irradiation is able to initiate nucleation at different supercooled temperatures (from −5 °C to −2 °C) in agar gel if optimum intensity and duration of ultrasound were chosen. Evaluation of the effect of 0.25 W cm⁻² ultrasound intensity and different durations of ultrasound application on agar gels showed that 1 s was not long enough to induce nucleation, 3 s induced the nucleation repeatedly but longer irradiation durations resulted in the generation of heat and therefore nucleation was postponed. Investigation of the effect of ultrasound intensity revealed that higher intensities of ultrasound were effective when a shorter period of irradiation was used, while lower intensities only resulted in nucleation when a longer irradiation time was applied. In addition to this, higher intensities were not effective at longer irradiation times due to the heat generated in the samples by the heating effect of ultrasound. In conclusion, the use of ultrasound as a means to control the crystallization process offers promising application in freezing of solid foods, however, optimum conditions should be selected.     

EVH black hole solutions with higher derivative corrections

We analyze the effect of higher derivative corrections to the near horizon geometry of the extremal vanishing horizon (EVH) black hole solutions in four dimensions. We restrict ourselves to a Gauss–Bonnet correction with a dilation dependent coupling in an Einstein–Maxwell-dilaton theory. This action may represent the effective action as it arises in tree level heterotic string theory compactified to four dimensions or the K3 compactification of type II string theory. We show that EVH black holes, in this theory, develop an AdS₃ throat in their near horizon geometry.     

Analysis of the magnetic losses in iron-based soft magnetic composites with MgO insulation produced by sol-gel method

This work investigated the magnetic losses of heat treated iron-based soft magnetic composites with a thin MgO insulating layer produced by sol-gel method. The samples were characterized by energy dispersive X-ray spectroscopy, X-ray analysis and Fourier transform infrared spectroscopy. The results show that the surface of the powders contains a thin layer of MgO insulation. The loss results indicate that the hysteresis part for both the core loss and total loss factor was approximately the same for the MgO-insulated compacts and conventional SOMALOY^TM samples with phosphate insulation after annealing at 600 °C. But the MgO-insulated compacts exhibited significantly lower eddy current contribution of both core loss and total loss factor with respect to SOMALOY^TM samples after annealing. Also the contribution of eddy current in the iron particles for MgO insulated compacts (k_p=0.91) was noticeably higher than this contribution for SOMALOY^TM samples (k_p=0.18) after annealing due to the higher electrical resistivity of the MgO-insulated compacts.     

A note on the sum of the sample autocorrelation function

It is shown that the sum of the sample autocorrelation function at lag h≥1 is always for any stationary time series with arbitrary length T≥2 (Hassani, 2009 [1]). In this paper, the distribution of a set of the sample autocorrelation function using the properties of this quantity is considered. It is found that the distribution of a set of the sample autocorrelation estimates is not independent and identically distributed. This finding implies that the result of diagnostic check and model building using the traditional assumption of iid can be quite misleading.