Polymer-assisted laser desorption/ionization analysis of small molecular weight compounds

The use of non-polar, small polymers as matrices for the analysis of low molecular weight compounds in polymer-assisted laser desorption/ionization mass spectrometry (PALDI-MS) is demonstrated. The matrices evaluated were either based on an oligothiophene or a benzodioxin backbone. Metallocenes, polycyclic hydrocarbons, a fluorosurfactant, and a subset of small organic compounds with various functionalities, served as model analytes. The mechanism of ionization charge transfer is discussed and ionization potentials for the matrices in the study have been estimated using density functional theory (DFT) calculations. Some of the results are possibly contradictory to the generally accepted limiting conditions for gas-phase charge-transfer reactions. These results are interpreted in the light of energy pooling. Also a new mass calibration procedure for the low-mass region in positive ion mode is presented, and some aspects of the ionization/desorption process leading to radical cations are studied.     

Calculation of enthalpies of hydrogenation of hydrocarbons

Sets of hydrogen molecule equivalents have been developed which permit the calculation of hydrogenation of different types of carbon-carbon bonds from ab initio total energies (3-21G and 6-31G* basis sets, and, to a more limited extent, for MP2/6-31G* data) of reactants and products. The calculated enthalpies of hydrogenation are in good agreement with experiment for unstrained molecules, with average errors on the order of 2 kcal/mol. The 6-31G* equivalents allow the enthalpies for strained molecules to be calculated accurately, but the 3-21G equivalents do not. The equivalents for both basis sets have been tested by calculating the enthalpies of hydrogenation of carbon-carbon bonds in nitrogen- and oxygen-containing organic molecules, free radicals, and classical carbocations. The results are in good agreement with experiment in most cases.     

Depth profiles of shallow implanted layers by soft ion sputtering and total-reflection X-ray fluorescence

A new method suitable for depth profiling of shallow layers on different materials is presented. It is based on a soft and planar ion sputtering combined with differential weighing, total-reflection X-ray fluorescence (TXRF) spectrometry and Tolansky interferometry. By means of a stepwise repetition of these techniques it is possible to determine both density/depth and concentration/depth profiles. The respective quantities are expressed in terms inherent only to the sample and traceable to the SI-units or subunits gram, nanometer and mole. It is a unique feature of this method that density/depth profiles can directly be obtained from measurements without any calibration or theoretical approximation. The method is applied to a Si wafer implanted with Co ions of 25 keV energy and a nominal dose of 1×10¹⁶ cm⁻². The depth resolution is shown to be <3 nm while a total depth of some 100 nm can be reached. The concentration/depth profile is compared with RBS measurements, wet-chemical etching plus TXRF and Monte Carlo simulations. In view of the fact that only similar but not exactly the same samples have been examined by these methods, a good correspondence can be noticed.     

The electronic structure of molecules by a many-body approach

The vertical valence ionization potentials of cyclopropane, ethylene oxide and ethylene imine are calculated by a many-body Green's function method. For C₃H₆ the ordering of the ionization potentials is 2e(), 1e(), 2a₁(), 1a₂(), 1e(). The assignment of the 2a₁ and the 1a₂ ionization potentials which has been controversial is thus clarified. The ordering is in agreement with the result obtained via Koopmans' theorem. For ethylene oxide and ethylene imine Koopmans' theorem fails in predicting the correct order of ionic states. For C₂H₄O the ordering of the ionization potentials is 2b ₁(), 4a ₁, 1a ₂(), 2b ₂,3a ₁, 1b ₁(), 1b ₂, 2a ₁ and for C₂H₅N 6a, 5a, 3a, 2a, 4a, 3a, 1a, 2a. The agreement of the computed ionization potentials with the experimental values is very satisfactory.     

AlSiP3, a compound with a novel wurtzite-pyrite intergrowth structure

AlSiP₃ is formed by heating aluminum and silicon powder with red phosphorus and adding small amounts of iodine or AlCl₃. Small, black crystals with metallic lustre grow at 1200°K. The compound crystallizes in the orthorhombic space group Pmnb (No. 62) with a = 987.2 pm, b = 586.1 pm, c = 608.8 pm and four formula units. In the structure isolated P atoms as well as P₂ pairs are present (PP = 218.2 pm). Silicon is tetrahedrally bonded (SiP = 224.2 ? 228.2 pm) whereas aluminum has octahedral coordination (AlP = 244.2 – 260.8 pm). The structure can be described as an intergrowth structure of wurtzite and pyrite type.     

Infrared and Raman spectroscopic investigations of the Nb(V) fluoro and oxofluoro complexes in the LiF-NaF-KF eutectic melt with development of a diamond IR cell

A vacuum-tight cell for infrared spectroscopic investigations of extremely corrosive melts, e.g., molten fluorides, has been constructed and tested up to 750 degrees C. The cell has a gold-lined sample chamber and a diamond window transparent for the infrared light. It can be furnished with a gold piston that enables the recording of short-path-length FTIR spectra of liquid samples. Solutions of Nb(V) in LiF-NaF-KF eutectic (FLINAK) with and without oxide additions have been investigated by FTIR and Raman spectroscopy. The presence of NbF7(2-), NbOF5(2-), and NbO2F4(3-) complexes was established in the molten state at 600 degrees C. After solidification NbF7(2-) was still the only Nb(V) all-fluoro complex present. Three oxofluoro complexes, NbOF6(3-), NbOF5(2-), and NbO2F4(3-), have been identified in the solid state. Typical frequency regions for the different complexes are established. Finally, it was shown that K2NbF7 can be used as an indicator to determine the oxide content of the sample melts.     

Theoretical studies on the smallest fullerene: from monomer to oligomers and solid States

Hybrid B3LYP and density-functional-based tight-binding (DFTB) computations on the solid-state structures and electronic properties of the C(20) fullerene monomer and oligomers are reported. C(20) cages with C(2), C(2h), C(i), D(3d), and D(2h) symmetries have similar energies and geometries. Release of the very high C(20) strain is, in theory, responsible for the ready oligomerization and the formation of different solid phases. Open [2+2] bonding is preferred both in the oligomers and in the infinite one-dimensional solids; the latter may exhibit metallic character. Two types of three-dimensional solids, the open [2+2] simple cubic and the body-centered cubic (bcc) forms, are proposed. The energy of the latter is lower due to the better oligomer bonding. The open [2+2] simple cubic solid should be a conductor, whereas the bcc solids are insulators. The most stable three-dimensional solid-state structure, an anisotropically compressed form of the bcc solid, has a HOMO-LUMO gap of approximately 2 eV and a larger binding energy than that of the proposed C(36) solid.     

Cathodoluminescence Depth Profiling in SiO2:Ge Layers

 For investigation of the luminescent center profile cathodoluminescence measurements are used under variation of the primary electron energy E ₀ = 2…30 keV. Applying a constant incident power regime (E ₀·I ₀ = const), the depth profiles of luminescent centers are deduced from the range of the electron energy transfer profiles dE/dx. Thermally grown SiO₂ layers of thickness d = 500 nm have been implanted by Ge⁺-ions of energy 350 keV and doses (0.5–5)10¹⁶ ions/cm². Thus Ge profiles with a concentration maximum of (0.4 – 4) at% at the depth of d_m≅240 nm are expected. Afterwards the layers have been partially annealed up to T _a = 1100 °C for one hour in dry nitrogen. After thermal annealing, not only the typical violet luminescence (λ = 400 nm) of the Ge centers is strongly increased but also the luminescent center profiles are shifted from about 250 nm to 170 nm depth towards the surface. This process should be described by Ge diffusion processes, precipitation and finally Ge nanocluster formation. Additionally, a Ge surface layer is piled-up extending to a depth of roughly 25 nm.     

Zur Kenntnis der Reaktionsfähigkeit des Thiomorpholins und alkylsubstituierter Thiomorpholine, 4. Mitt.

Thiomorpholine as well as alkyl substituted thiomorpholines and their Sdioxides, respectively, are transformed into the corresponding N-Aminothiomorpholines by nitrosation (1–5) followed by the reduction with zinc in acetic acid/acetic acid anhydride under simultaneous formation of the corresponding N-acetyl derivates, and hydrolysis by hydrochloric acid (6–9). Examples of this method are described. 4-Aminothiomorpholines and their Sdioxides react with aldehydes or ketones to give azomethines (10–31). Acylation with mono-and dicarbonic acid chlorides leads to the N-acyl derivatives32–44.Mannich condensation is also possible. By oxidation with yellow mercury oxide tetracenes are formed (46–47).

Teil der DissertationM. Schmitz, Techn. Hochschule Aachen, 1975.     

Electrochemical and spectroscopic studies of the chloro and oxochloro complex formation of Nb(V) and Ta(V) in NaCl-AlCl3 melts

The equilibrium constant for the chloro complex formation of Nb(V) NbCl6-<--->NbCl5+Cl- (i) in NaCl-AlCl3 melts at 175 degrees C was found to be pKi = 2.86(5). The oxochloro complex formation of Nb(V) and Ta(V) in NaCl-AlCl3 melts at 175 degrees C could be explained by the following equilibria: MOCl4- <-->MOCl3+Cl- (ii) MOCl3<-->MOCl2(+)+Cl- (iii) where M = Nb and Ta. The equilibrium constants determined by potentiometric measurements with chlorine-chloride electrodes were, for M = Nb, pKii = 2.21(4) and pKiii = 3.95(5) and, for M = Ta, pKii = 2.743(15) and pKiii = 4.521(13). NbCl6- has two bands in the UV-vis region, a strong one at 34.7 x 10(3) cm-1 and a weaker one at 41.6 x 10(3) cm-1. The MOCl4- complexes showed in the case of Nb(V) absorption bands at 32.7 and 42.9 x 10(3) cm-1 and in the case of Ta(V) at 38.6 and 48.1 x 10(3) cm-1.