Synthesis and Characterization of Novel Orange-emitting Iridium（Ⅲ） Complexes with Diphenylquinoline Ligands Containing Fluorinated Substituent

Three new cyclometalated iridium（m） complexes based on ligands of diphenylquinoline with fluorinated subsfituents were prepared, and characterized by elemental analysis （EA）, ^1H NMR, and mass spectroscopy （MS）. The photophysical and electrophosphorescent properties of the complexes were briefly discussed.     

杂多酸的固载化─关于制备负载型酸催化剂的一般原理

杂多酸同时具有酸和氧化－还原的催化特性，有着很广泛的应用前景．这类化合物在一系列精细合成中取代硫酸作为催化剂以满足环保的要求，显示出了很大的潜力．杂多酸固载化后，不仅能在液相氧化和酸催化反应中把催化剂从反应介质中很方便地分离出来，而且还为这类均相催化反应的多相化，甚至利用催化蒸馏新工艺等创造了应有的条件，可以使生产工艺大大简化，获得更广泛的应用．本文以很好表征过的多种孔性材料，包括氧化物，如Ａｌ_２Ｏ_３、ＳｉＯ_２、ＴｉＯ_２、硅藻土、膨润土和来源不同的活性炭为载体，考察了负载杂多酸催化剂的催化活性．在大量前期工作的基础上，通过总结载体对固载杂多酸催化活性的影响等，探讨载体的内在性质在杂多酸固载、吸附和催化反应中的作用本质，为由吸附法制备各种负载型固体酸催化剂在液相中的应用提供可资参考的模型．     

Comparison of the dehalogenation of dihalomethanes (CH2XI, where X = Cl, Br, I) following ultraviolet photolysis in aqueous and NaCl saltwater environments

The ultraviolet photolysis of low concentrations of CH(2)XI (X = Cl, Br, I) were investigated in water and saltwater solutions by photochemistry and picosecond time-resolved resonance Raman spectroscopy. Photolysis in both kinds of solutions formed mostly CH(2)(OH)(2) and HI and HX products. However, photolysis of the CH(2)XI molecules in saltwater resulted in production of some CH(2)XCl products not observed in aqueous solutions without salt present. The appearance of these new products in saltwater solutions is accompanied by a decrease in the amount of CH(2)(OH)(2), HI, and HX products compared to photolysis in aqueous solutions without salt present. The possible implications for photolysis of CH(2)XI and other polyhalomethanes in seawater and other salt aqueous environments compared to nonsaltwater solvated environments is briefly discussed.     

掺铒a-SixC1-x-H薄膜的发光特性

用等离子体增强化学气相沉积（PECVD）的方法，以固定的氢气（H2）流量和不同的硅烷（SiH4）和甲烷（CH4）流量比沉积了一系列的氢化非晶SiC（a-Si，C1-x-H）膜。用这种宽带隙的a-SixC1-x-H材料作为掺铒的基体材料，通过离子注入的方法得到掺铒的a-SixC1-x-H（a-SixC1-x-H：Er）膜。注入以后的样品经过不同温度的退火。用X射线光电子能谱（XPS）、红外吸收光谱（IR）、拉曼散射谱（Raman）等技术研究不同的SiH4／CH4流量比和退火温度对a-SixC1-x-H：Er发光强度的影响。结果表明，高温退火引起了膜中C的分凝，对饵的发光是不利的。通过低温和室温下铒发光强度的比较，表明这种材料具有较弱的温度猝灭效应。     

Microwave-accelerated derivatization processes for the determination of phenolic acids by gas chromatography-mass spectrometry

A rapid method for the derivatization of phenolic antioxidants using microwave irradiation has been developed. Six antioxidatively active phenolic components of wines and fruits, namely gallic acid, gentisic acid, vanillic acid, caffeic acid, ferulic acid and p-coumaric acid were used in the model study. The solution of phenolic acids was evaporated to dryness on a rotary evaporator followed by further drying under microwave irradiation (600 W, 30 s). The resultant residue was dissolved in pyridene and treated with bis(trimethylsilyl)acetamide while irradiated by microwave using high power for 30 s. Controlled reaction was carried out employing bis(trimethylsilyl)trifluoroacetamide under conventional heating for 30 min. The trimethylsilyl derivatives were identified and quantified on a gas chromatography/mass selective detector. The mass spectral fragmentation patterns of the derivatives obtained by microwave irradiation were identical to those prepared by heating. The yields of microwave-assisted silylation were comparable to those from conventional heating. The rsd were less than 8% for six replicates. The linearity in wine matrix was nearly perfect. This method is a useful protocol to examine the phenolic constituents in wines and agricultural products.     

甲烷部分氧化制合成气：Ⅲ.镍系催化剂物性及与催化性能间的关联

使用ＴＰＲ和Ｈ２－ＴＰＤ技术对镍铝系催化剂的还原和氢脱附性能进行了研究，并与其催化性能相关联。结果发现，镍铝系催化剂的氢脱附能力与其催化性能之间有一定联系，脱附氢能力越强，催化剂的甲烷部分氧化反应性能就越好，但催化性能与还原性能无直接关联。     

磷酰化与非磷酰化蛋氨酸水溶液的脉冲辐解研究

蛋氨酸能快速清除导致辐射损伤的·OH自由基，在放射生物学上是一类很重要的辐射保护剂，因此，引起了人们的广泛关注［l一到．生物大分子的磷酸化作用亦越来越受到重视，特别是近年来基因调控研究发现，许多蛋白质和生物酶只有被磷酸化氧化才具有生理活性，文献［4－6］报导蛋     

Aerobic oxidation assisted by ligand-free palladium catalysts

Aerobic oxidation of electron-rich benzylic and phenyl allylic alcohols was achieved with high yields with only 0.1 mol.% of Pd(OAc)2 catalyst in the absence of any ligand. This procedure was expected to be valuable for realistic industrial-scale applications from both economic as well as environmental points of view.     

Self-assembly of a series of novel metal-organic compounds containing ferrocenecarboxylate components

Using FcCOONa (Fc = (eta(5)-C(5)H(5))Fe(eta(5)-C(5)H(4))) as starting material, we obtained an unprecedented metal-organic coordination polymer containing ferrocenecarboxylate components [[Pb(2)(FcCOO)(eta(2)-FcCOO)(mu(2)-eta(2)-FcCOO)(mu(3)-eta(2)-FcCOO)(CH(3)OH)].1.5CH(3)OH.H(2)O](n) (1), tetramer [Zn(4)(mu(2)-FcCOO)(6)(mu(4)-O)] (2), and coordination polymers [Pb(FcCOO)(mu(2)-FcCOO)(bpe)](n) (3) (bpe = 1,2-bis(4-pyridyl)ethene), [[Zn(FcCOO)(2)(bpt)].2.5H(2)O](n) (4) (bpt = N,N'-bis(3-pyridylmethyl)thiourea), and [Zn(FcCOO)(eta(2)-FcCOO)(bbp)](n) (5) (bbp = 4,4'-trimethylene-dipyridine). Compounds 1 and 2 are formed by ferrocenecarboxylate units coordinating with Pb(II) or Zn(II). In polymer 1, ferrocenecarboxylate units have four kinds of coordinate modes; just these novel coordinate modes lead to the unprecedented one-dimensional polymer where two kinds of rhomboids are arranged alternatively along the chain. Compound 2 is a tetramer, in which a distinct connectivity of the six ferrocene units is established through the four Zn atoms. Compounds 3-5 are obtained by organic ligands bridging Pb(II) or Zn(II), leading to a new type of metal-organic coordination polymer.