Excellent passivation of thin silicon wafers by HF‐free hydrogen plasma etching using an industrial ICPECVD tool

In this work, hydrogen plasma etching of surface oxides was successfully accomplished on thin (～100 µm) planar n‐type Czochralski silicon wafers prior to intrinsic hydrogenated amorphous silicon [a‐Si:H(i)] deposition for heterojunction solar cells, using an industrial inductively coupled plasma‐enhanced chemical vapour deposition (ICPECVD) platform. The plasma etching process is intended as a dry alternative to the conventional wet‐chemical hydrofluoric acid (HF) dip for solar cell processing. After symmetrical deposition of an a‐Si:H(i) passivation layer, high effective carrier lifetimes of up to 3.7 ms are obtained, which are equivalent to effective surface recombination velocities of 1.3 cm s^–1 and an implied open‐circuit voltage (V_oc) of 741 mV. The passivation quality is excellent and comparable to other high quality a‐Si:H(i) passivation. High‐resolution transmission electron microscopy shows evidence of plasma‐silicon interactions and a sub‐nanometre interfacial layer. Using electron energy‐loss spectroscopy, this layer is further investigated and confirmed to be hydrogenated suboxide layers. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Optical properties of flower‐like CdS prepared by a hydrothermal method with SDBS as surfactant

In this article, flower‐like CdS structures have been prepared by a hydrothermal method with SDBS as surfactant. The influences of different experimental conditions on the morphologies, UV‐Vis and fluorescence properties of CdS have been investigated. The performances of CdS have been analyzed by X‐ray diffraction (XRD), field emission scanning electron microscopy (FESEM), ultraviolet‐visible (UV–Vis) and room‐temperature photoluminescence (PL). The XRD result indicates that the flower‐like CdS structures are of hexagonal phase. The FESEM results indicate that the main role of SDBS is to make the CdS crystals assemble together to form the flower‐like structures. The UV–Vis results show CdS has a strong absorption in the ultraviolet region and visible‐light region. The PL results show CdS has two emission peaks, respectively at 461 nm and 553 nm. The growth mechanism for the formation of flower‐like CdS structures is also described.     

Pyrolysis and combustion model of oil sands from non-isothermal thermogravimetric analysis data

Thermogravimetric (TG) data of oil sand obtained at Engineering Research Center of Oil Shale Comprehensive Utilization were studied to evaluate the kinetic parameters for Indonesian oil sand samples. Experiments were carried out at heating rates of 5, 15, and 25 °C min^?1 in nitrogen, 10, 20, and 50 °C min^?1 in oxygen atmosphere, respectively. The extent of char combustion was found out by relating TG data for pyrolysis and combustion with the ultimate analysis. Due to distinct behavior of oil shale during pyrolysis, TG curves were divided into three separate events: moisture release, devolatilization, and evolution of fixed carbon/char, where for each event, kinetic parameters, based on Arrhenius theory, were calculated. Coats–Redfern method, Flynn–Wall–Ozawa method, and distributed activation energy model method have been used to determine the activation energies of degradation. The methods are compared with regard to their characteristics and the ease of interpretation of the thermal kinetics. Activation energies of the samples were determined by three different methods and the results are discussed.     

A novel method for the synthesis of sulfur substituted-cyclopyrophosphate of cADPR analogs

A facile and efficient protocol for the synthesis of sulfur substituted-cyclopyrophosphate of cIDPRE(P_S~1-cIDPRE) was developed.The key step was the cyclization process which was completed by the sulfur substituted cyclization precursor 1b via the one-pot phosphoramidite strategy.     

Plasma-Induced Synthesis of CuO Nanofibers and ZnO Nanoflowers in Water

Fiber-shaped cupric oxide (CuO) nanoparticles and flower-shaped ZnO nanoparticles were facilely synthesized by plasma-induced technique directly from copper and zinc electrode pair in water, respectively. The phase composition, morphologies and optical property of nanoparticles have been investigated by energy dispersive X-ray analysis, X-ray powder diffraction, transmission electron microscopy and UV–vis. The in situ analysis by an optical emission spectroscopy clarified the formation mechanism. Plasma was generated from the discharge between a metal electrode pair in water by a pulse direct current power. CuO and ZnO nanoparticles were synthesized via almost the same formation mechanism, which were prepared via the rapid energetic radicals’ bombardment to electrodes’ surface, atom vapour diffusion, plasma expansion, solution medium condensation, and in situ oxygen reaction and further growth. This novel plasma-induced technique will become a potential application in nanomaterials synthesis.     

Synthesis of biodiesel over ZnO/Ca(OH)2/KF catalyst prepared by the grinding method

A novel ZnO/Ca(OH)₂/KF solid base catalyst was prepared by the grinding method and applied to biodiesel synthesis by the transesterification of soybean oil. The effect of various parameters such as KF molar amount, calcination temperature, the amount of catalyst, molar ratio of methanol to oil, reaction temperature, and time on the activity of the catalyst were investigated. The catalysts were characterized by several techniques of thermogravimetry/derivative thermogravimetry, X–ray diffraction, Hammett indicator method, and scanning electron microscopy. The analysis results indicated that the KF interacted with Ca(OH)₂ and formed KCaF₃ phase before calcination of the catalyst. The formed KCaF₃ crystal phase was the main catalytic active component for the catalyst activity. In addition, the basicity of ZnO/Ca(OH)₂/KF was greatly influenced by the different calcination temperates, and the catalyst activity was correlated closely with the basicity. A desired biodiesel yield of 97.6 % was obtained at catalyst amount of 3 %, methanol/oil of 12:1, and reaction time of 1.5 h at 65 °C.     

Enantioseparation and molecular modeling study of eight psychoactive drugs on a coated polysaccharide-based chiral stationary phase

The enantioseparation of eight psychoactive drugs has been firstly performed on a coated cellulose-based chiral stationary phase (Chiralcel OJ-H). To obtain optimum separation conditions, the influences of alcohol modifiers and basic/acidic additives have been studied. As a result, except for the partial separation of oxybutynin enantiomers, the other seven drug enantiomers, including mirtazapine, sulpiride, promethazine, citalopram, oxazepam, donepezil, and cyamemazine, have been completely separated. Additionally, for gaining a better insight into the chiral recognition mechanisms, molecular docking was carried out using the Autodock software. Herein, binding energy and conformations of the chiral stationary phase complexes were provided, and it was found that the distinction in enantiomeric conformation determined the number and strength of intermolecular interactions between analytes and chiral stationary phase which resulted in the difference in binding energies of two enantiomers, and ultimately led to the different migration. These modeling results were in accordance with the observed enantioseparation results in high performance liquid chromatography experiments. At last, chiral separation mechanisms have been discussed in detail, and it has been confirmed that hydrogen bond, π–π, hydrophobic interactions, and some special interactions synergistically contributed to the enantioseparation of psychoactive drugs.     

Multiple Stimuli-Responsive Conformational Exchanges of Biphen[3]arene Macrocycle

Conformational exchanges of synthetic macrocyclic acceptors are rather fast, which is rarely studied in the absence of guests. Here, we report multiple stimuli-responsive conformational exchanges between two preexisting conformations of 2,2′,4,4′-tetramethoxyl biphen[3]arene (MeBP3) macrocycle. Structures of these two conformations are both observed in solid state, and characterized by ¹H NMR, ¹³C NMR and 2D NMR in solution. In particular, conformational exchanges can respond to solvents, temperatures, guest binding and acid/base addition. The current system may have a role to play in the construction of molecular switches and other stimuli-responsive systems.