驻波声场中单分散细颗粒的相互作用特性

利用外加声场促进悬浮在气相中的细颗粒发生相互作用,进而引起颗粒的碰撞和凝并,使得颗粒平均粒径增大、数目浓度降低,是控制细颗粒排放的重要技术途径.为探究驻波声场中单分散细颗粒的相互作用,建立包含曳力、重力、声尾流效应的颗粒相互作用模型,采用四阶经典龙格-库塔算法和二阶隐式亚当斯插值算法对模型进行求解.将数值模拟得到的颗粒声波夹带速度和相互作用过程与相应的解析解和实验结果进行对比,验证模型的准确性.进而研究颗粒初始条件和直径对相互作用特性的影响.结果表明,初始时刻颗粒中心连线越接近声波波动方向、颗粒位置越接近波腹点,颗粒间的声尾流效应就越强,颗粒发生碰撞所需要的时间就越短.研究还发现,颗粒直径对颗粒相互作用的影响取决于初始时刻颗粒中心连线偏离声波波动方向的程度.当偏离较小时,颗粒直径越大,颗粒发生碰撞所需要的时间越短;当偏离很大时,直径较小的颗粒能够发生碰撞,而直径较大的颗粒则无法发生碰撞.     

Noninvasive Temperature Measurement in Dental Materials Using Nd3+, Yb3+ Doped Nanoparticles Emitting in the Near Infrared Region

In this work, the application of near infrared (NIR)-emitting NaYbF₄:1%Tm³⁺@NaLuF₄:30%Nd³⁺ core–shell nanoparticles is reported for noninvasive probing and monitoring the temperature during photopolymerization of dental materials. When excited at 808 nm, the synthesized nanoparticles emit NIR photoluminescence (PL) with two distinctive peaks at 865 and 980 nm which correspond to radiative transitions from the doped Nd³⁺ and Yb³⁺ ions, respectively. Luminescence intensity ratio between these two bands is found to vary with temperature due to temperature-dependent electronic excitation energy transfer between Nd³⁺ and Yb³⁺ ions at the core/shell interface. This finding allows luminescence ratiometric evaluation of the in situ temperature during photopolymerization of resin cement (doped with nanoparticles) in a veneer placement procedure. In addition, the NIR emission also enables PL imaging of the distribution of the adhesive under the veneer. The results highlight that rare-earth ions–doped nanoparticles with both excitation and emission in the NIR spectral range are advantageous for both PL-based nanothermometry and imaging due to the reduced attenuation of NIR light by dental ceramics.     

Design of diamond-shape photonic crystal fiber polarization filter based on surface plasma resonance effect

A novel plasmonic polarization filter based on the diamond-shape photonic crystal fiber(PCF) is proposed. The resonant coupling characteristics of the PCF polarization filter are investigated by the full-vector finite-element method. By optimizing the geometric parameters of the PCF, when the fiber length is 5 mm, the polarization filter has a bandwidth of 990 nm and an extinction ratio(ER) of lower than -20 dB. Moreover, a single wavelength polarization filter can also be achieved, along with an ER of -279.78 dB at wavelength 1.55 μm. It is believed that the proposed PCF polarization filter will be very useful in laser and optical communication systems.     

Paraxial propagation of cosh-Airy vortex beams in chiral medium

Propagation dynamics of the cosh-Airy vortex(CAiV) beams in a chiral medium is investigated analytically with Huygens–Fresnel diffraction integral formula. The results show that the CAiV beams are split into the left circularly polarized vortex(LCPV) beams and the right circularly polarized vortex(RCPV) beams with different propagation trajectories in the chiral medium. We mainly investigate the effect of the cosh parameter on the propagation process of the CAiV beams.The propagation characteristics, including intensity distribution, propagation trajectory, peak intensity, main lobe's intensity, Poynting vector, and angular momentum are discussed in detail. We find that the cosh parameter affects the intensity distribution of the CAiV beams but not its propagation trajectory. As the cosh parameter increases, the distribution areas of the LCPV and RCPV beams become wider, and the side lobe's intensity and peak intensity become larger. Besides, the main lobe's intensity of the LCPV and RCPV beams increase with the increase of the cosh parameter at a farther propagation distance, which is confirmed by the variation trend of the Poynting vector. It is significant that we can vary the cosh parameter to control the intensity distribution, main lobe's intensity, and peak intensity of the CAiV beams without changing the propagation trajectory. Our results may provide some support for applications of the CAiV beams in optical micromanipulation.     

La1-x CaxAl0.8Cr0.2O3/CaZrO3(0≤x≤0.2)复相陶瓷材料发射率的研究

以La2O3、Al2O3、ZrO2、Cr2O3、CaCO3为原料,通过高温固相反应法制备La1-xCaxAl0.8 Cr0.2O3/CaZrO3(0≤x≤0.2)复相陶瓷材料,分别通过XRD、SEM和EDS等仪器对试样的物相组成和显微结构进行分析,利用紫外可见近红外分光光度计测量其红外吸收曲线.结果 表明:当CaZrO3理论生成量和La1-xCaxAl0.8Cr0.2O3的摩尔比小于0.20时复相陶瓷材料在0.76～2.5 μm的发射率较La0.8 Ca0.2Al0.8Cr0.2O3得到进一步提高,当CaZrO3理论生成量和La1-xCaxAl0.8Cr0.2O3的摩尔比为0.04时发射率最佳.     

Urea-based polyacetylenes as an optical sensor for fluoride ions

Novel acetylenes carrying urea groups, 1-(4-ethynylphenyl)-3-(4-nitrophenyl) urea (1), 1-(4-propargyl)-3-(4-nitrophenyl) urea (2), were synthesized and polymerized with rhodium catalyst. Polymers [poly(1) and poly(2)] with moderate molecular weights were obtained in good yields. The anion sensing ability of poly(1) and poly(2) was estimated using the tetra-n-butylammonium (TBA) salts of a series of anions in DMF. Upon the addition of F-, the color of the DMF solution of poly(1) and poly(2) immediately turned to a different color, while the color of solution changed slightly upon addition of Cl-, HSO4-, Br-, and NO3-, indicating the F- sensing ability of poly(1) and poly(2). The 1H-NMR titrations of poly(1) revealed that the colorimetric response of poly(1) was triggered by the urea/F- interaction through the hydrogen bonding and/or deprotonation process. The absorption spectra titration and Hill plot analysis were carried out to measure the F- binding ability, and the Hill coefficient in the poly(1)/F- complexation was found to be 5.8. This result clearly indicated that this binding mode between poly(1) and F- was based on a positive homotropic allosterism.     

水泥聚苯模壳格构式混凝土墙体的抗侧性能试验及分析

论文介绍6片不同高宽比的水泥聚苯模壳格构式混凝土墙体在轴压力和水平往复侧推力作用下的试验,分析这种墙体的抗侧强度、刚度和延性等力学性能.试验表明,高宽比大于1的墙体破坏时表现为墙体跟部的单一水平裂缝,其他部位完好;高宽比3∶4的墙体破坏时存在多条通过格构梁柱的斜向裂缝,墙体裂缝分布密集,变形能力好.     

用于双光子激发荧光寿命显微成像的高重复频率皮秒扫描相机

建立了一台基于新研制的高重复频率皮秒扫描相机的双光子激发荧光寿命显微成像系统,重点介绍所研制的高重复频率皮秒扫描相机。为了在高时间分辨力的同时扩大时间测量范围,实现大面积两维空间高时间分辨取样测量,从而提高采样速率和更有效地发挥扫描相机的作用,设计和研制了一种大面积、高时间分辨力扫描变像管和一种重复频率高达1MHz的斜坡电压扫描电路。基于上述关键部件所研制的扫描相机具有重复频率高、扫描速度可调、时间分辨力高、工作面积大、非线性低、触发晃动小等优点。用钛宝石飞秒激光器作为激光脉冲源,通过脉冲提取器将76MHz的高重复频率降低为1MHz,采用可调延时器和标准具对扫描相机的时间分辨力、扫描速度和非线性进行标定。该系统的时间分辨力达到6.5ps,非线性为2.60%,可测量的时间范围从十几皮秒到几十纳秒。测量了若丹明6G和香豆素314两种标准荧光染料的荧光寿命,取得了与参考文献一致的实验结果。     

反应磁控溅射制备TiO2和Nb2O5混合光学薄膜

利用反应磁控溅射技术在BK-7基片上制备了二氧化钛和五氧化二铌均匀混合的光学薄膜.薄膜的内部微结构、表面形貌、化学成分比例以及光学性质等用X射线衍射、高分辨扫描电子显微镜、原子力显微镜、X射线光电子能谱和紫外可见近红外分光光度计进行研究;发现制备的薄膜为非晶结构,薄膜的表面平整、内部结构致密,不存在柱状结构或结晶颗粒的缺陷,TiO2与Nb2O5的成分比例大致是1∶1.54.从光学透射光谱计算的折射率和消光系数显示,在550 nm波长处的折射率为2.34,消光系数为2.0×10－4.结果表明制备的薄膜是TiO2和Nb2O5均匀混合的高质量光学薄膜.     

Measurement of thermal rise-time of a laser diode based on spectrally resolved waveforms

Thermal resistance and thermal rise-time are two basic parameters that affect most of the performances of a laser diode greatly. By measuring waveforms received after a spectroscope at wavelengths varied step-by-step, the spectrally resolved waveforms can be converted to calculate the thermal rise-time. Basic formulas for the spectrum variation of a laser diode and the measurement set-up by using a Boxcar are described in the paper. As an example, the thermal rise-time of a p-side up packaged short-pulse laser diode was measured by the method to be 390 μs. The method will be useful in characterizing diode lasers and LD modules in high-power applications.