Influence of Particle Morphology and Flow Conditions on the Dispersion Behavior of Fumed Silica in Silicone Polymers

The dispersion behavior of agglomerates of several grades of fumed silica in poly(dimethyl siloxane) liquids has been studied as a function of particle morphology and applied flow conditions. The effects of primary particle size and aggregate density and structure on cohesivity were probed through tensile and shear strength tests on particle compacts. These cohesivity tests indicated that the shear strength of particle compacts was two orders of magnitude higher than the tensile strength at the same overall packing density. Experiments carried out in both steady and time‐varying simple‐shear flows indicate that dispersion occurs through tensile failure. In the steady‐shear experiments,enhanced dispersion was obtained at higher levels of applied stress and, at comparable levels of applied stress, dispersion was found to proceed faster at higher shear rates. Experiments conducted in time‐varying flows further corroborated the results obtained in tensile cohesivity tests. Experiments in which the mean and maximum stresses in the time‐varying flows were matched to the stresses produced in steady shear flows highlight the influence of flow dynamics on dispersion behavior.     

UV curing of a novel resin derived from poly(ethylene terephthalate)

The synthesis and characterization of photopolymerizable unsaturated polyester resins based on PET waste are described. The resins came from a depolymerization process based on the glycolysis of PET by diethylene glycol (DEG). Different molecular weights of glycolysates were synthesized. Then, the latter was functionalized by a methyl hemiester of maleic acid to obtain unsatured α,ω‐bismaleate PET oligomers. In the presence of an electron donor monomer, such as triethylene glycol divinyl ether, these electron acceptor oligomers were copolymerized by way of charge‐transfer complexes under UV irradiation. The reaction was monitored in situ by real‐time IR spectroscopy to study the kinetics of photopolymerization. This one was studied in relation with the physical and chemical characteristics of oligoesters and the composition of mixtures containing divinyl ethers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1324–1335, 2007     

Elevation of the glass transition temperature in flexible‐chain semicrystalline polymers

In the idealized two‐phase model of a semicrystalline polymer, the amorphous intercrystalline layers are considered to have the same properties as the fully‐amorphous polymer. In reality, these thin intercrystalline layers can be substantially influenced by the presence of the crystals, as individual polymer molecules traverse both crystalline and amorphous phases. In polymers with rigid backbone units, such as poly(etheretherketone), PEEK, previous work has shown this coupling to be particularly severe; the glass transition temperature (T_g) can be elevated by tens of degrees celsius, with the magnitude of the elevation correlating directly with the thinness of the amorphous layer. However, this connection has not been explored for flexible‐chain polymers, such as those formed from vinyl‐type monomers. Here, we examine T_g in both isotactic polystyrene (iPS) and syndiotactic polystyrene (sPS), crystallized under conditions that produce a range of amorphous layer thicknesses. T_g is indeed shown to be elevated relative to fully‐amorphous iPS and sPS, by an amount that correlates with the thinness of the amorphous layer; the magnitude of the effect is severalfold less than that in PEEK, consistent with the minimum lengths of polymer chain required to make a fold in the different cases. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1198–1204, 2007     

具有位相型修理的离散时间可修排队系统

本文研究了具有一般独立输入，位相型修理的离散时间可修排队系统，假定服务台对顾客的服务时间和服务台寿命服从几何分布，运用矩阵解析方法我们给出系统嵌入在到达时刻的稳态队长分布和等待时间分布，并证明这些分布均为离散位相型分布．我们也得到在广义服务时间内服务台发生故障次数的分布，证明它服从一个修正的几何分布．我们对离散时间可修排队与连续时间可修排队进行了比较，说明这两种排队系统在一些性能指标方面的区别之处．最后我们通过一些数值例子说明在这类系统中顾客的到达过程、服务时间和服务台的故障率之间的关系．     

123 Phases in CeLa2Cu2MgO8 samples

A tetragonal 123 phase with the composition close to CeLa₂ { Cu ₂ ²⁺ } [Mg²⁺]O₈ (the braces indicate the Cu(2) positions; the brackets indicate the Cu(1) positions) with the parameters a = b = 0.3909(3) nm, c = 1.6591(8) nm was prepared at 860°C under an oxygen atmosphere with an elevated oxygen pressure. When the lanthanum-for-barium substitution was incomplete, the resulting 123 phase had the composition close to CeLa_1.7Ba_0.3{ Cu _1.7 ²⁺ } [Mg]O₈ with the unit cell parameters a = b = 0.3868(3) nm, c = 1.6578(8) nm that contains Cu³⁺ in the Cu(2) positions. The partial substitution of barium for lanthanum (the melting point of barium oxide is almost 500°C lower that of the lanthanum oxide) appreciably facilitated the synthesis: the 123 phase in this sample was more than 90%. The existence of Cu³⁺ in the Cu(2) positions enhanced the electrical conductivity of the sample.     

半线性椭圆方程正解的存在性及熄灭现象

本文在环形域上证明了带有奇异性的半线性椭圆方程边值问题(1)、(2·)在C~2(Ω)∩C~0(Ω)中正解的存在性,且这个解是径向对称的,解关于R_0(R_1)的连续单调性.还给出了解有熄灭现象的充分必要条件.     

Periodic solutions of second-order quasilinear hyperbolic equations

We study a periodic boundary-value problem for a quasilinear equation with the d'Alembert operator on the left-hand side and a nonlinear operator on the right-hand side and establish conditions under which the solution of the indicated problem is unique.Translated from Ukrainskii Matematicheskii Zhurnal, Vol. 47, No. 10, pp. 1370–1375, October, 1995.     

Application of the variation principle for the problem of buckling of a nonlinearly elastic ring nonuniform along its thickness

There has been considerable recent attention given to the stressed and buckled states of items with complicated configuration made of different nonlinearly elastic materials joined by complete adhesion. However, effective analytical solutions for such problems have been hindered by mathematical difficulties. Approximate methods have thus been developed for such problems. A variational combined principle has been formulated in this communication. A nonlinear geometrical approach has been used for formulating a mixed-type functional with physical relationships given by Euler equations, nonlinear equilibrium equations, and nonlinear boundary conditions for a piecewise-nonuniform nonlinearly elastic body composed of finite elements (particles). As an example, buckling along the nonuniform thickness of nonlinearly elastic rings was analyzed hypothetically assuming plane cross-sections. Options for two-, three-, four-, five-, and six-layered rings in a periodical structure have been reviewed. The critical buckling forces for an even number of layers have been found to be equal to each other. The ratios of the critical forces, elasticity moduli, and proportionality levels were determined for all five variants by the Runge-Kutta method.Presented at the Ninth International Conference on the Mechanics of Composite Materials (Riga, October, 1995).Translated from Mekhanika Kompozitnykh Materialov, Vol. 31, No. 2, pp. 262–268, March–April, 1995.