Analysis of sialo-N-glycans in glycoproteins as 1-phenyl-3-methyl-5-pyrazolone derivatives by capillary electrophoresis

A method for the analysis of the sialo-N-glycans in glycoproteins was established by the electrokinetic chromatography mode of capillary electrophoresis (CE) in sodium dodecyl sulfate (SDS) micelles as 1-phenyl-3-methyl-5-pyrazolone (PMP) derivatives, using sialo-N-glycans in fetuin as a model. Six major and some minor peaks were observed for the N-glycans in fetuin, which were well separated from each other using 50 mM phosphate buffer, pH 6.0, containing SDS to a concentration of 30 mM in an uncoated fused-silica capillary, and these peaks were assigned to sialo-N-glycans having either of the biantennary or β1-3/β1-4 linked galactose-containing complex type triantennary N-glycans as the basic structures, by an indirect method based on the assignment of the peaks in high-performance liquid chromatography separated in parallel with CE and peak collation between these two separation methods. The attaching position of the sialic acid residue was determined using the linkage preference of neuraminidase isozymes. The established system is considered to be useful for routine analysis of microheterogeneity of the carbohydrate moiety of this model glycoprotein from the following reasons: (1) the derivatization with PMP proceeds quantitatively under mild conditions without causing release of the sialic acid residue, (2) the derivatives can be sensitively detected by UV absorption, (3) the procedure is simple, rapid and reproducible. Preliminary results of N-glycan analysis for several other glycoproteins under these conditions are also presented.     

Emulsion Combustion and Flame Spray Synthesis of Zinc Oxide/Silica Particles

Two flame spray methods, emulsion combustion method (ECM) and flame spray pyrolysis (FSP), were compared for synthesis of pure and mixed SiO₂ and ZnO nanoparticles. The effect of silicon precursor was investigated using liquid hexamethyldisiloxane (HMDSO) or SiO₂ sol, while for ZnO zinc acetate (ZA) was used. Gas phase reaction took place when using HMDSO as Si precursor, forming nanoparticles, whereas the SiO₂ sol used as Si source was not evaporated in the flame, creating large aggregates of the sol particles (e.g. 1 m). The FSP of ZA produced ZnO homogeneous nanoparticles. Lower flame temperatures in ECM than in FSP resulted in mixed gas and liquid phase reaction, forming ZnO particles with inhomogeneous sizes. The FSP of HMDSO and ZA led to intimate gas-phase mixing of Zn and Si, suppressing each other's particle growth, forming nanoparticles of 19 nm in BET-equivalent average primary particle diameter. Nucleation of ZnO and SiO₂ occurred independently by ECM of HMDSO and ZA as well as by FSP of the SiO₂ sol and ZA, creating a ZnO and SiO₂ mixture. The reaction of ZnO with SiO₂ was likely to be enhanced by ECM of the SiO₂ sol and ZA where both Zn and Si species were not evaporated completely, resulting in ZnO, -willemite and Zn_1.7SiO₄ mixed phase.     

Improved surface morphology of flow-modulated MOVPE grown AIN on sapphire using thin medium-temperature AIN buffer layer

High-temperature (HT) AIN films were grown on (0 0 0 1) sapphire by low-pressure flow-modulated (FM) metal organic vapor phase epitaxy (MOVPE) with and without inserting a thin medium-temperature (MT) AIN layer. To suppress parasitic reactions between the sources of trimethylaluminum (TMA) and ammonia (NH₃), TMA and NH₃ was introduced to the reactor of MOVPE by alternating supply way. Surface morphology and crystalline quality were characterized by a scanning electronic microscopy (SEM), atomic force microscopy (AFM) and X-ray rocking curve (XRC) measurements of (0 0 0 2) and (10-12) diffractions. The AFM and SEM measurements indicated that the thin MT-AIN layer had a strong influence on the surface morphology of the HT-AIN films. The surface morphology became quite smooth by inserting the thin MT-AIN layer and surface RMS roughness values were 0.84 nm and 13.4 nm for the HT-AIN films with and without inserting the thin MT-AIN buffer layer, respectively. By etching the samples in aqueous KOH solution, it was found that the polarity of AIN films was different, the HT-AIN film with the thin MT-AIN layer could not be etched, indicating that the film had an Al-polar surface; however, the film without the MT-AIN layer was etched, which was explained that that film had a N- or mixed-polar surface. The mechanism for the origin of the different polarity of HT-AIN with and without the thin MT-AIN layer was proposed and discussed in detail.     

Growth of undoped and Zn-doped GaN nanowires

Undoped and Zn-doped GaN nanowires were synthesized by chemical vapor deposition (CVD), and the effects of substrates, catalysts and precursors were studied. A high density of GaN nanowires was obtained. The diameter of GaN nanowires ranged from 20 nm to several hundreds of nm, and their length was about several tens of μm. The growth mechanism of GaN nanowires was discussed using a vapor–liquid–solid (VLS) model. Furthermore, room-temperature cathodoluminescence spectra of undoped and Zn-doped GaN nanowires showed emission peaks at 364 and 420 nm, respectively.     

Determination of rare earth elements in hot spring water and crater lake water samples by neutron activation analysis incorporating coprecipitation process using aluminium as a collector

Hot spring water and crater lake water samples were analyzed for their rare earth elements: (REE's) by neutron activation method, which, in the irradiation, sample preparation, incorporated a coprecipitation process in which aluminium was used as a collector. Ten REE's, La, Ce, Sm, Eu, Gd, Tb, Dy, Tm, Yb and Lu, were consequently detected and determined at the ppb level with satisfactory precision. It was shown that the aluminium coprecipitation is effective in enhancing concentrations of the REE's and reducing the amounts of interfering nuclides before neutron irradiation.     

Studies on thermally induced structural changes in silicon based polymers by positron annihilation

Temperature dependence of positron annihilation lifetime spectra of polysilanes such as, poly(methyl-n-propylsilane) (PMPrS) and poly(di-n-hexylsilane) (PDHS) has been investigated. The τ₃ in PMPrS is seen to increase monotonically around the solid–liquid transition temperature. The transition temperature and free volume are observed to depend on the molecular weight and/or packing of the backbones. For PDHS, a sharp change in τ₃ and I₃ is seen at the solid–solid transition temperature. Free volume radius probability density functions, above and below the transition temperature, are presented in PMPrS and PDHS. Positron studies are complimented by conventional thermal analysis studies.     

Site symmetry and crystal field splittings of Ce 3+ in LiLuF 4 and LiSr 0.8 Ca 0.2 AlF 6

Electron paramagnetic resonance (EPR) spectra of Ce 3+ in LiLuF 4 (LLF) and LiSr 0.8 Ca 0.2 AlF 6 (LSCAF) observed at low temperatures (<20 v K) show that the Ce 3+ centers have tetragonal and pseudo-trigonal symmetry with ( g , g )=(2.751, 1.467) and (2.14, 0.80), respectively. The EPR lines of Ce 3+ in LSCAF are inhomogeneously broadened by different Ce 3+ configurations which correspond to the random occupation of the second nearest neighbor cation sites by Ca 2+ and Sr 2+ and/or charge compensators. These EPR results indicate that the Ce 3+ centers in LLF and LSCAF are associated with substitution of Ce 3+ for Lu 3+ with eight-fold coordination and Sr 2+ /Ca 2+ with six-fold coordination, respectively. Fourier transform infrared absorption has been used to measure transitions between the 2 F 5/2 ground state and the 2 F 7/2 multiplet of Ce 3+ in LLF at 10 v K. The optical absorption and luminescence of Ce 3+ :LLF and Ce 3+ :LSCAF in the UV range are strongly polarized. The energy levels and polarization dependence of the optical transitions can be accounted for in terms of the crystal field potential experienced by the Ce 3+ ions under the action of the different point group symmetries.     

Stabilizing the monodromy of an open book decomposition

We prove that any mapping class on a compact oriented surface with non-empty boundary can be made pseudo-Anosov and right-veering after a sequence of positive stabilizations.      

Chelation of cadmium ions by phytochelatin synthase: role of the cysteine-rich C-terminal.

The interactions between Cd(2+) and the C-terminal region of phytochelatin (PC) synthase using recombinant wild-type and mutant PC synthase were studied. We show that site-directed mutagenesis of Cys residues at C(358)C(359)XXXC(363)XXC(366) motif decreases the number of Cd(2+) and other heavy metal ions interacting with the enzyme, and that the motif binds the metals discriminatingly. The optimum binding ratio of PC synthase to Cd(2+) was also determined. The findings indicate that Cys exists as a free SH residue and that it is involved in the regulation of PC enzyme activity by transferring the metals into closer proximity with the catalytic domain. These results are important in understanding heavy metal detoxification mechanisms in higher plants, a step towards phytoremediated-applications.