Determination of nicotine and cotinine in rat plasma by liquid chromatography-tandem mass spectrometry

A method was developed for the efficient determination of nicotine and cotinine in rat plasma samples originating from nicotine exposure studies. Nicotine and cotinine were extracted from plasma samples with dichloromethane and concentrated to minimum volume with nitrogen stream. The volatility of nicotine was prevented by the addition of hydrochloric acid to the organic solvent during evaporation. The samples were analysed using liquid chromatography with triple quadrupole mass spectrometry. For quantification, the deuterated internal standards were added and the most intensive MS-MS ion of the analyte and internal standards were monitored. For confirmatory analysis, two specific MS-MS ions, viz. m/z 132 and 106 for nicotine and m/z 80 and 98 for cotinine, were monitored and the ratios between the ions were calculated and compared with those of standards. The ratios have to be within the tolerances of the EU criteria. The limit of identification of the developed method was 1 microg/l. The repeatability ranged from 5 to 12% (R.S.D.) for nicotine and from 3 to 5% for cotinine at the concentration level of 1-60 microg/l (n = 4).     

Recent and future developments of liquid chromatography in pesticide trace analysis

Until recently, the application of liquid chromatography (LC) in pesticide analysis was usually focused on groups of compounds or single compounds for which no suitable conditions were available for analysis with gas chromatography (GC). However, recent developments in both detection and column material technology show that LC significantly enlarged its scope in this field of analysis. Obviously, the most striking example is the rather abrupt transition of LC coupled to mass spectrometric detection (MS) from an experimental and scientifically fashionable technique to a robust, sensitive and selective detection mode rendering LC-MS being increasingly used in pesticide trace analysis. Other recent major developments originate from the innovation of new LC column packing materials, viz. immuno-affinity sorbents, restricted access medium materials and molecular imprinted polymers improving considerably the screening of polar pesticides by means of reversed-phase LC with UV detection. In this review the merits and perspectives of these important LC developments and their impact to current and future applications in pesticide trace analysis are presented and discussed.     

Determination of polybutylene terephthalate polycondensation equilibrium constant using a batch reactor

The PBT polycondensation equilibrium constant at 255°C was determined using a batch reactor. Starting from a Polybutylene terephthalate (PBT) prepolymer having a degree of polymerisation of 12.7, equilibrium experiments were performed in the range of 1 to 50 mbar. The equilibrium degree of polymerisation (i) was determined indirectly using dilute solution viscometry of a solution of 1 weight % PBT in m - cresol. The degree of polymerisation of PBT obtained at equilibrium in the range of 1 to 50 mbar at 255°C as a function of the BDO partial pressure (mbar) could be expressed by: i = 111.47 − 86.18 exp(−1.14 equation/tex2gif-stack-1.gif). The equilibrium solubility of 1,4 butanediol (BDO) in the PBT melt was derived form the BDO partial pressure using the Flory - Huggins theory. The PBT polycondensation reaction equilibrium constant was related to the degree of polymerisation by the equation: in the range i = 26 − 100. The PBT polycondensation equilibrium constant at high degrees of polymerisation is in line with literature data and thermodynamics.     

Highly stable redox-active molecular layers by covalent grafting to conductive diamond

We demonstrate a modular "click"-based functionalization scheme that allows inexpensive conductive diamond samples to serve as an ultrastable platform for surface-tethered electrochemically active molecules stable out to ～1.3 V vs Ag/AgCl. We have cycled surface-tethered Ru(tpy)(2) to this potential more than 1 million times with little or no degradation in propylene carbonate and only slightly reduced stability in water and acetonitrile.     

Possibilities and pitfalls in analyzing (upgraded) pyrolysis oil by size exclusion chromatography (SEC)

The applicability of size exclusion chromatography (SEC) to analyze (upgraded) pyrolysis oil samples has been studied using model compounds, pyrolysis oils and hydrodeoxygenated pyrolysis oils. The assumptions needed for the conversion of the chromatogram to the M_w-distribution were validated. It was shown that the conversion of elution volume to molecular weight (based on polystyrene calibration curves) can introduce substantial errors in the prediction of the molecular weight. The conversion of RID response to W(log M) (as plotted on the y-axis of the M_w-distribution) is based on the assumption of a compound independent RID response factor and linear response to concentration. While the latter was shown to be true within the concentration range studied, the former was not true: the RID response factor depends on the type of (upgraded) pyrolysis oil. It was shown that within a single pyrolysis oil sample, the RID response for the low molecular weight fraction was a factor 3 lower than the high molecular weight fraction. Furthermore long term column fouling can influence SEC results that cannot be corrected with regular polystyrene recalibrations.Based on the results we recommend SEC not to be used as a quantitative method for characterization (upgraded) pyrolysis oil samples, but as a tool to compare (upgraded) pyrolysis oil samples, preferably prepared using incremental operating conditions and expected to have similar molecular composition. This work has further shown that (i) the ∫UVDdv/∫RIDdv ratio can be used as an indication of the sum of the relative aromaticity and conjugated double bond content for (upgraded) pyrolysis oil, and (ii) the negative peak area appearing in the low molecular weight part of the chromatogram can be used to estimate the water content of (upgraded) oil samples.     

Formation of molecular monolayers on TiO2 surfaces: a surface analogue of the Williamson ether synthesis

Strategies to modify metal oxide surfaces are important because of the increasing applications of metal oxides in catalysis, sensing, electronics, and renewable energy. Here, we report the formation of molecular monolayers on anatase nanocrystalline TiO(2) surfaces at near-ambient temperatures by a simple one-step immersion. This is achieved by an analogue of the Williamson ether synthesis, in which the hydroxyl groups of the TiO(2) surface react with iodo-alkane molecules to release HI and form a Ti-O-C surface linkage. The grafted molecules were characterized by Fourier-transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) to confirm the formation of covalently bonded monolayers. Kinetic studies yielded an activation barrier of ～59 kJ/mol for the grafting reaction. Measurements of hydrolytic stability of the grafted molecules in water show that approximately half the molecules are removed within minutes to hours at temperatures of 25-100 °C with an activation energy of ～82 kJ/mol, while the remaining molecules are stable for much longer periods of time. These different stabilities are discussed in terms of the different types of Ti-O-C bonds that can form on TiO(2) surfaces.