α-Methylidene- and α-Alkylidene-β-lactams from Nonproteinogenic Amino Acids

Treatment of methyl 2-(1-hydroxyalkyl)prop-2-enoates 1 with conc. HBr solution afforded methyl (Z)-2-(bromomethyl)alk-2-enoates 2 , which were transformed regioselectively into N-substituted methyl (E)-2- (aminomethyl)alk-2-enoates 3 (S_N2 reaction) and into N-substituted methyl 2-(1-aminoalkyl)prop-2-enoates 4 (S_N2′ reaction). Regiocontrol of nucleophilic attack by amine was accomplished simply by choice of solvent, the S_N2 reaction occurring in MeCN and the S_N2′ reaction in petroleum ether. Hydrolysis and lactamization afforded β-lactams 7 and 8 , containing an exocyciic alkylidene and methylidene group at C(3), respectively.     

Differential determination of arsenic (III) and total arsenic with L-cysteine as prereductant using a flow injection non-dispersive atomic absorption device

Speciation of arsenic in environmental samples gains increasingly importance, as the toxic effects of arsenic are related to its oxidation state. A method was developed for the determination of trace amounts of arsenic (III) and total arsenic by flow injection hydride generation coupled with an in-house made non-dispersive AAS device. The total arsenic is determined after prereduction of arsenic (V) to arsenic (III) with L-cysteine in a low concentration of hydrochloric, acetic or nitric acid. The conditions for the prereduction, hydride generation and atomization were systematically investigated. A quartz tube temperature of 800 degrees C was found to be optimum in view of peak shape and baseline stability. Pb(II), Ni(II), Fe(III), Cu(II), Ag(I), Al(III), Ga(II), Se(IV), Bi(III) were checked for interfering with the 2 microg/L As(V) signal. A serious signal depression was only observed for Se(IV) and Bi(III) at a 150-fold excess. With the above system, arsenic was determined at a sampling frequency of about 1/min with a detection limit (3sigma) of 0.01 microg/L using a 0.5 mL sample. The reagent blank was 0.001+/-0.0003 absorbance units and the standard deviation of 10 measurements of the 2 microg/l As signal was found to be 1.2%. Results obtained for standard reference materials and water samples are in good agreement with the certified values and those obtained by ICP-MS     

Small angle neutron scattering measurements on micellar solutions of perfluor detergents

Small angle neutron scattering experiments (SANS) were carried out with solutions of the Lithium salt of Perfluoroctanoic acid (LIPFO) in pure D₂O and mixtures of D₂O and H₂O and Diethylammoniumperfluorononanoate (DEAFN). For LIPFO the scattering intensity as a function of the scattering angles could be fitted with calculated scattering functions for spheres. The contrast variation method allowed us to extract accurate values for the radius, the concentrations of the micelles and the aggregation number. For DEAFN the observed scattering function could be fitted on the basis of spherical vesicles with an appreciable variance in diameter. For several solutions these parameters and the concentration of the vesicles could be evaluated.     

Syntheses and Structure of Gd<Subscript>3</Subscript>Rh<Subscript>1.940(7)</Subscript>In<Subscript>4</Subscript>

Summary. The gadolinium–rhodium–indide Gd₃Rh_1.940(7)In₄ was prepared by arc-melting of the elements and subsequent annealing in a corundum crucible in a sealed silica tube. Gd₃Rh_1.940(7)In₄ adopts the hexagonal Lu₃Co_1.87In₄ type, space group , a = 781.4(5), c = 383.8(3) pm, wR2 = 0.0285, BASF = 0.375(1) (merohedric twinning via a twofold axis (xx0)), 648 F² values, 22 variables. The structure is derived from the well known ZrNiAl type through an ordering of rhodium and indium atoms on the Ni2 sites. The Rh/In ordering forces a reduction of the space group symmetry from to , leading to merohedric twinning for the investigated crystal. The Rh1 site has an occupancy of only 94.0(7)%. The investigated crystal had a composition Gd₃Rh_1.940(7)In₄. The main geometrical motif are three types of centered, tricapped trigonal prisms, i.e., [Rh1In2₆Gd₃], [Rh2Gd₆In2₃], and [In1Gd₆In2₃]. The shortest interatomic distances occur for Rh–In (276–296 pm) followed by In–In (297 pm). Together, the rhodium and indium atoms build up a three-dimensional [Rh_1.940(7)In₄] network, in which the gadolinium atoms fill slightly distorted pentagonal channels. The crystal chemistry of Gd₃Rh_1.940(7)In₄ is discussed on the basis of a group-subgroup scheme.     

Self-assembly of amphiphilic hexapyridinium cations at the air/water interface and on HOPG surfaces.

Mono- and multilayers of a novel amphiphilic hexapyridinium cation with six eicosyl chains (3) are spread at the air/water interface as well as on highly ordered pyrolytic graphite (HOPG). On water, the monolayer of 3 is investigated by recording surface pressure/area and surface potential/area isotherms, and by Brewster angle microscopy (BAM). Self-organized tubular micelles with an internal edge-on orientation of molecules form at the air/water interface at low surface pressure whereas multilayers are present at high surface pressure, after a phase transition. Packing motifs suggesting a tubular arrangement of the constituting molecules were gleaned from atomic force microscopy (AFM) investigations of Langmuir-Blodgett (LB) monolayers being transferred on HOPG at different surface pressures. These LB film structures are compared to the self-assembled monolayer (SAM) of 3 formed via adsorption from a supersaturated solution, which is studied by scanning tunnelling microscopy (STM). On HOPG the SAM of 3 consists of nanorods with a highly ordered edge-on packing of the aromatic rings and an arrangement of alkyl chains which resembles the packing of molecules at the air/water interface at low surface pressure. Additional details of the molecular packing were gleaned from single-crystal X-ray structure analysis of the hexapyridinium model compound 2b, which possesses methyl instead of eicosyl residues.     

Lower rim substituted tert-butylcalix[4]arenes. Part 8: Calix[4]arenes with dialkoxyphosphoryl functions. Synthesis and complexing properties

New compounds: 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis(3-diisopropoxyphosphorylpropoxy)calix[4]arene (1) and 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis(3-methoxyethoxyphosphorylpropoxy)calix[4]arene (2) were synthesized and their ionophoric properties in ion-selective membrane electrodes were studied in comparison with already described by us 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis(3-diethoxyphophorylpropoxy)calix[4]arene (3). Complexes of 1 with calcium(II), lanthanum(III), europium(III) and gadolinium(III) nitrates were prepared in direct reaction of the ligand and appropriate metal salts. They were characterized by spectral data (IR, UV/Vis, luminescence, NMR, ESI-MS) and elemental analysis. The similarity in complexing behavior of the (dialkoxyphosphoryl)propoxy-calix[4]arenes toward calcium and some lanthanides was observed.     

Chiral allyl cations are captured by furan with 100% stereoselectivity: synthesis of enantiopure 2-alkoxy-8-oxabicyclo

A low-temperature (-95 degrees C) protocol for intermolecular cycloadditions of furan to chiral silyloxyallyl cations in dichloromethane is described. Key precursors are open-chain, mixed a-ketoacetals, which are chiral. The resulting [4+3] cycloadducts are densely functionalized and are isolated as single enantiomers in high chemical yield. The yield of the cycloadducts increases with increasing dilution. Three and four stereogenic centres are created in one single step.     

Application of Laser-ICP-MS in environmental analysis

Laser sampling inductively coupled plasma mass spectrometry has been used for the quantitative determination of trace elements in samples of environmental significance. Solid sampling in environmental analysis is a very demanding type of application: in fact, the instrumental conditions must be carefully chosen and optimized to minimize signal fluctuations, the vaporized material introduced into the plasma should be representative to the composition of the whole sample and a suitable calibration method must be developed. The analytical problems addressed are: determination of elements in plant ash and their direct determination in growth rings of oaks.     

Synthesis of 6S, 7S-anhydro-serricornine.

Diastereoselective and enantioselective reduction of the β-ketoester $\text{3}$ by yeast to $\text{4}$ provided the chiral starting material for a synthesis of 4RS,6S,7S-serricornine, having the same configuration as the natural product. This material was converted into optically active and diastereomerically pure 6S,7S-anhydro-serricornine ($\text{2}$).     

Über Eigenschaften und Reaktivität von Aluminiumtrichlorid · Ethanthiol und Galliumtrichlorid · Ethanthiol

On Some Properties and the Reactivity of Trichloroaluminium · Ethanthiol and Trichlorogallium · Ethanthiol Complexes The synthesis of aluminiumtrichloride · ethanthiol as well as galliumtrichloride · ethanthiol is given. The reactions of these 1:1-adducts with the Lewis bases N(CH₃)₃. P(CH₃)₃, O(C₂H₅)₂ and S(CH₃)₂ and with the compounds (CH₃)₃SiSCH₃ and Pb(SCH₃)₂ are discussed, the reaction products are investigated. Spectra as well as some chemical and physical properties of the starting material and the products are reported.