Radiation-induced polymerization of cyclohexene sulfide in the solid state

Radiation-induced solid-state polymerization of cyclohexene sulfide has been investigated. Differential thermal analysis shows that this compound has a phase transition point at ?74°C and behaves as a plastic crystal in the temperature range from ?74 to ?20°C (melting point). By rapid cooling, this plastic crystal was easily supercooled, and below ?166°C a glassy crystal, i.e., a supercooled nonequilibrium state of plastic crystal, was obtained. In-source polymerization proceeded in the plastic crystalline state. Postpolymerization of glassy crystalline monomer irradiated at ?196°C occurred above ?166°C (glass transition point) during subsequent heating.     

MYCOCHROME SYSTEM AND CONIDIAL DEVELOPMENT IN CERTAIN FUNGI IMPERFECTI

Abstract. A photoreceptor system, “mycochrome”, is involved in a blue and near UV reversible photo-reaction which in turn plays an important role in the photocontrol of conidial development in Alternaria tomato, Botrytis cinerea and Helminthosporium oryzae. Conidial development was controlled by alternating exposures to blue and near UV light with the final response being determined by the final light received. When the final light was near UV a conidium developed; when it was blue, conidiation was inhibited and a “sterile” conidiophore was formed. The effects of the two lights were alternatively reversible. Blue and near UV reversible photoreaction was also found in a light-minus-dark difference spectrum of an intracellular particulate fraction isolated from dark-grown mycelia of A. tomato, and two pigments, P_B (blue absorbing type) and P_NUV (near UV absorbing type), were contained in that photoreaction. P_B was tightly bound to the particulate fraction and P_NUV was either soluble in the cytoplasm or very loosely bound to the particulate fraction. Blue and near UV reversible photoreaction occurred only under the coexistence of P_B and P_NUV. That is, a dip in the near UV region and peak absorbance in the blue region was induced by irradiation with near UV light; however, both conditions were partially dissipated with a subsequent irradiation of blue light. These absorbance changes were revers-ibly repeated by alternating doses of blue and near UV light. When molecular oxygen was introduced after exposure to near UV light, peak absorbance in the blue region rapidly disappeared, and these absorbance changes were repeatedly reversible. Similar results were obtained by treatment with sodium hydrosulfite and molecular oxygen. Thus, it was concluded that the mycochrome system suggested in photo-conidiation was consistent with certain active substances showing blue and near UV reversible absorbance changes and caused by photooxidation reduction reaction.     

Photodegradation of polyethylene in the presence of ferric salt: Influence of ferric acetylacetonate on model compounds

The influence of ferric acetylacetonate [Fe(acac)₃] on the photodegradation of model compounds of polyethylene (PE) was examined. By studying electron-spin-resonance (ESR) spectra of photoirradiated compounds such as 1-octene and 1,7-octadiene, which contain carbon double bonds, Fe(acac)₃ was found to accelerate the formation of allyl radical by contact with them. On the other hand, Fe(acac)₃ suppressed the radical formation based on Norrish type I reaction in a carbonyl group of compounds such as 2-octanone and 3-octanone. Based on the study of ultraviolet (UV) spectra as well as ESR spectra on photoirradiated samples, the influence of Fe(acac)₃ on the photodecomposition of model compounds of PE was discussed. Finally, the discussion turned to the mechanism of photodecomposition of PE in the presence of ferric salt.     

Direct counting of submicrometer-sized photosynthetic apparatus dispersed in medium at cryogenic temperature by confocal laser fluorescence microscopy: estimation of the number of bacteriochlorophyll c in single light-harvesting antenna complexes chlorosomes of green photosynthetic bacteria

The number of pigments in single light-harvesting complexes (chlorosomes) were calculated by imaging single chlorosomes in a frozen buffer at cryogenic temperature with a confocal laser fluorescence microscope and pigment extraction. Chlorosomes were isolated from two types of green photosynthetic bacteria Chlorobium (Chl.) tepidum and Chloroflexus (Cfl.) aurantiacus and were individually imaged in the frozen medium. Each fluorescence spot observed mainly came from a single chlorosome and was ascribable to self-aggregates of bacteriochlorophyll (BChl) c molecules as core parts of chlorosomes. A three-dimensional distribution of fluorescence of single chlorosomes was analyzed, and the number of chlorosomes in a volume of 54,000 microm(3) was counted directly. On the basis of the results, averaged numbers of the BChl c molecules contained in a single chlorosome of Chl. tepidum and Cfl. aurantiacus were determined to be 1.4 x 10(5) and 9.6 x 10(4), respectively. The present numbers are almost comparable to those estimated by other methods (Martinez-Planells et al., Photosynth. Res. 2002, 71, 83 and Monta?o et al., Biophys. J. 2003, 85, 2560).     

Selective adsorption and stable solidification of radioactive cesium ions by porous silica gels loaded with insoluble ferrocyanides

Development of highly functional cesium selective adsorbents for the decontamination of high-activity-level water(HALW) from the Fukushima NPP-1 accident is very urgent. In order to selectively adsorb the radioactive cesium, three kinds of novel porous silica gels loaded with insoluble ferrocyanides(SLFC) were prepared using a successive impregnation/precipitation method. Based on the results of previous research, the SLFC composites have relatively large uptake ratio above 95%, distribution coefficients(Kd) above 103 cm3/g, and excellent adsorption kinetics even in seawater. The solidification results also indicate that zeolites have an excellent Cs immobilization characteristic, gas-trapping and self-sintering abilities, and low leachability. We chose three kinds of SLFC composites to achieve the optimization of solidification by mixing with nine kinds of additives at high temperatures(up to 1200 °C). The Cs contents in the three composites were estimated to be below 30% of the initial contents and decreased with the three stages at calcination temperatures ranging from 25 to 1200 °C. By contrast, the Cs immobilization ratio was markedly lowered by mixing with additives: of those, allophane had the best immobilization result. By increasing the additive ratio to 50 wt%, the Cs immobilization ratio became almost 100% and no volatilization of Cs was detected even after calcination at 1200 °C. This result indicates that calcination of the mixture of SLFC composites after adsorbing Cs+ ions and specific additives under appropriate ratio is effective for stable solidification.     

Thermal extrusion of cellulose using hydroxypropyl methylcellulose

Cellulose - Hydroxypropyl methylcellulose (HPMC), a cellulose derivative, is highly water soluble, viscoelastic, and thermoplastic. However, the thermoplasticity of HPMC has not yet been studied in...     

Biohybrid Organic Heterostructure Based on Chlorophyll-Bacteriochlorophyll Aggregates for Ecofriendly Hydrogen Production

Hydrogen energy is an abundant, clean, sustainable and environmentally friendly renewable energy source. Therefore, the production of hydrogen by photocatalytically splitting water on semiconductors has been considered in recent years as a promising and sustainable strategy for converting solar energy into chemical energy to replace conventional energy sources and to solve the growing problem of environmental pollution and the global energy crisis. However, highly efficient solar-driven photocatalytic hydrogen production remains a huge challenge due to the poor visible light response of available photocatalytic materials and the low efficiency of separation and transfer of photogenerated electron-hole pairs. In the present work, organic heterojunction structures based on bacteriochlorophyll (BChl) and chlorophyll (Chl) molecules were introduced and used for solar-driven photocatalytic hydrogen production from water under visible light. Also, noble metal-free photocatalyst was successfully constructed on Ti₃C₂T_x nanosheets by simple successive deposition of Chl and BChl, which was used for the photocatalytic splitting water to hydrogen evolution reaction (HER). The results show that the optimal BChl@Chl@Ti₃C₂T_x composite has a high HER performance with 114 μmol/h/g_cat, which is much higher than the BChl@Ti₃C₂T_x and Chl@Ti₃C₂T_x composites.     

Bipolar Electrode-based Electrochromic Devices for Analytical Applications – A Review

Bipolar electrode-based (BPE-based) electrochromic devices have garnered increasing attention in the past decade. These BPE-based electrochromic devices have been used for analytical health monitoring, point-of-care (POC) diagnostics, and chemical sensing. In this review, we highlight recent progress made regarding BPE-based electrochromic devices constructed for these analytical applications. Various, available electrochromic materials are summarized in the first section, after which the different device types (e. g., paper-based and self-powered) are discussed. Biological- and chemical-based analytical demonstrations of these devices are then reviewed. Finally, we conclude this review with a perspective on the future developments of BPE-based electrochromic devices in analytical applications.     

Novel synthesis of heterocyclic spirans by tandem cycloaddition to sulfur-containing heterocumulenes

Novel Ni(C0)₄-promoted tandem cycloadditions of diphenylcyclo- propenone to isothiocyanates and to CS₂ were found to provide new heterocyclic spirans, pyrroline-2-one-5-spiro-5′-thiolene-4′-ones and a thiolene-2-one-5-spiro-5′-thiolene-4′-one, respectively, in moderate yields.     

Synthesis of 5H-pyrido[2,3-a]phenoxazin-5-one and 5H-pyrido[3,2-a]phenoxazin-5-one derivatives

The 5H-pyrido[2,3-a]phenoxazin-5-one derivatives and 5H-pyrido[3,2-a]phenoxazin-5-one derivatives were prepared by the condensation of substituted 2-aminophenols with 6,7-dibromo-5,8-quinolinequinone followed by dehalogenation in the presence of sodium hydrosulfite dissolved in aqueous pyridine under a nitrogen atmosphere.