Screen-printed electrochemical sensors for label-free potentiometric and impedimetric detection of human serum albumin

Herein, two electrochemical methods based on potentiometric and impedimetric transductions were presented for albumin targeting, employing screen-printed platforms (SPEs) to make easy and cost-effective sensors with good detection merits. The SPEs incorporated ion-to-electron multi-walled carbon nanotubes (MWCNTs) transducer. Sensors were constructed using either tridodecyl methyl-ammonium chloride (TDMACl) (sensor I) or aliquate 336S (sensor II) in plasticized polymeric matrices of carboxylated poly (vinyl chloride) (PVC-COOH). Analytical performances of the sensors were evaluated using the above-mentioned electrochemical techniques. For potentiometric assay, constructed sensors responded to albumin with −81.7 ± 1.7 (r² = 0.9986) and −146.2 ± 2.3 mV/decade (r² = 0.9991) slopes over the linearity range 1.5 μM–1.5 mM with 0.8 and 1.0 μM detection limits for respective TDMAC- and aliquate-based sensors. Interference study showed apparent selectivity for both sensors. Impedimetric assays were performed at pH = 7.5 in 10 mM PBS buffer solution with a 0.02 M [Fe(CN)₆]^−3/−4 redox-active electrolyte. Sensors achieved detection limits of 4.3 × 10⁻⁸ and 1.8 × 10⁻⁷ M over the linear ranges of 5.2×10⁻⁸–1.0×10⁻⁴ M and 1.4×10⁻⁶–1.4×10⁻³ M, with 0.09 ± 0.004 and 0.168 ± 0.009 log Ω/decade slopes for sensors based on TDMAC and aliquate, respectively. These sensors are characterized with simple construction, high sensitivity and selectivity, fast response time, single-use, and cost-effectiveness. The methods were successfully applied to albumin assessment in different biological fluids.     

Isolation of tumor cells using size and deformation

The isolation and analysis of circulating tumor cells (CTCs) from blood are the subject of intense research. Although tests to detect metastasis on a molecular level are available, progress has been hampered by a lack of tumor-specific markers and predictable DNA abnormalities. The main challenge in this endeavor is the small number of available cells of interest, 1–2 per mL in whole blood. We have designed a micromachined device to fractionate whole blood using physical means to enrich for and/or isolate rare cells from peripheral circulation. It has arrays of four successively narrower channels, each consisting of a two-dimensional array of columns. Current devices have channels ranging in width from 20 to 5 μm, and in depth from 20 to 5 μm. Several optimizations resulting in the fabrication of a total of 10 derivative devices have been carried out; only two types are used in this study. Both have increasingly narrower gap widths between the columns along the flow axis with 20, 15, 10, and 5 μm spacing all on one device. The first 20 μm wide segment disperses the cell suspension and creates an evenly distributed flow over the entire device, whereas the others were designed to retain increasingly smaller cells. The channel depth is constant across the entire device, the first type was 10 μm deep and the second type is 20 μm deep. When cells from each of eight tumor cell lines were loaded into the device, all cancerous cells were isolated. In mixing experiments using human whole blood, we were able to fractionate cancer cells without interference from the blood cells. Additionally, either intact cells, or DNA, could be extracted for molecular analysis. The ultimate goal of this work is to characterize the cells on the molecular level to provide non-invasive methods to monitor patients, stage disease, and assess treatment efficacy. Furthermore, this work will use gene expression profiles to gain insights into metastasis.     

Halide ion effect on the chloroform chemical shift in supramolecular complexation studies with tetra-n-butylammonium salts: a 1H NMR and X-ray study

A ¹H NMR spectroscopic study of tetra-n-butylammonium halides (TBAX: X = Cl^? , Br^?  or I^? ) in CDCl₃ solutions was conducted. Complexation studies of TBAX salts with different host molecules using ¹H NMR in CDCl₃ have previously revealed that the reference residual CHCl₃ proton signal had been shifted downfield. The aim of the study was to quantify the extent of these chemical shift changes with TBAX salts. Linear concentration–chemical shift relationships in each case were obtained from the resulting titration plots obtained from the addition of the TBAX salts alone to CDCl₃. Interactions in the solid state as determined by X-ray crystallography support the solution-state investigations indicating halide ion–chloroform proton interactions.     

X-ray CT in the detection of palm weevils

Early detection of the red palm weevils (RPW) is a major challenge in agriculture among all kinds of palm trees due to the nature of the insect and the difficulty to trace them through their life stages associated with the tree life. Many methods have been applied for the weevil detection such as X-ray diffraction techniques, fluoroscopy and ultrasound. On the other hand, the idea of tomography has been used for other purposes such as the determination of the age of the tree and for applied environmental studies. Such technology can also reveal the weevil in principle. In this study, we explore the use of X-ray CT for weevil detection with the Monte Carlo method. A model of the stem of a palm tree is developed for simulations. MCNPX is chosen to carry out the simulations for the radiography tally in the code. The tally records the 2D data of the X-ray beams irradiating the tree model. An iterative reconstruction method for cone beam CT is applied to obtain the 3D slices of the tree model. We are exploring the minimum number of projection angles and the detectability of the weevil. We shall also report the sensitivity of weevil detection using X-ray CT with a large set of simulations with different weevil sizes and tree diameters.     

The Influence of Mechanical Milling and Subsequent Calcination on the Formation of Lithium Ferrites

The influence of ball milling and subsequent calcination of a 2.5:1 molar mixture of α-Fe₂O₃ and Li₂CO₃ on the formation of lithium ferrites has been investigated. Premilling was found to considerably lower the temperature at which the lithium ferrites LiFeO₂ and LiFe₅O₈ are formed. A β-to-α phase transition in LiFe₅O₈ was found to take place on cooling from ca. 1000°C depending on the milling history and cooling regime.     

Acoustic radiation from a fluid-filled, subsurface vascular tube with internal turbulent flow due to a constriction

The vibration of a thin-walled cylindrical, compliant viscoelastic tube with internal turbulent flow due to an axisymmetric constriction is studied theoretically and experimentally. Vibration of the tube is considered with internal fluid coupling only, and with coupling to internal-flowing fluid and external stagnant fluid or external tissue-like viscoelastic material. The theoretical analysis includes the adaptation of a model for turbulence in the internal fluid and its vibratory excitation of and interaction with the tube wall and surrounding viscoelastic medium. Analytical predictions are compared with experimental measurements conducted on a flow model system using laser Doppler vibrometry to measure tube vibration and the vibration of the surrounding viscoelastic medium. Fluid pressure within the tube was measured with miniature hydrophones. Discrepancies between theory and experiment, as well as the coupled nature of the fluid-structure interaction, are described. This study is relevant to and may lead to further insight into the patency and mechanisms of vascular failure, as well as diagnostic techniques utilizing noninvasive acoustic measurements.     

Cu2+ Effects on Beta-Amyloid Oligomerisation Monitored by the Fluorescence of Intrinsic Tyrosine

A non-invasive intrinsic fluorescence sensing of the early stages of Alzheimer's beta amyloid peptide aggregation in the presence of copper ions is reported. By using time-resolved fluorescence techniques the formation of beta amyloid-copper complexes and the accelerated peptide aggregation are demonstrated. The shifts in the emission spectral peaks indicate that the peptides exhibit different aggregation pathways than in the absence of copper.     

Applications of stripping voltammetric techniques in food analysis

Stripping voltammetric techniques are powerful analytical tools that are becoming widely used in various chemical analysis fields. Hence, the objective of this survey is to give a general overview on the scope of the applicability of stripping voltammetric methods in food industries. The applications discussed include recent studies on the utilization of these electroanalytical methods in determination of food contaminants (toxic metals, pesticide, fertilizers and veterinary drugs residuals), trace essential elements, food additive dyes and other organic compounds of biological significance. Tables that give method summaries referenced to the original work are provided.     

Application of microbioreactors in fermentation process development: a review

Biotechnology process development involves strain testing and improvement steps aimed at increasing yields and productivity. This necessitates the high-throughput screening of many potential strain candidates, a task currently mainly performed in shake flasks or microtiter plates. However, these methods have some drawbacks, such as the low data density (usually only end-point measurements) and the lack of control over cultivation conditions in standard shake flasks. Microbioreactors can offer the flexibility and controllability of bench-scale reactors and thus deliver results that are more comparable to large-scale fermentations, but with the additional advantages of small size, availability of online cultivation data and the potential for automation. Current microbioreactor technology is analyzed in this review paper, focusing on its industrial applicability, and directions for future research are presented.     

Simulating the introduction of a sapphire crystal into an epithermal neutron beamline

The epithermal beamline at the Portuguese Research Reactor is being optimized for Prompt Gamma Neutron Activation Analysis (PGNAA). One of the major changes is to thermalise the beam by the introduction of a sapphire crystal into the beamline. Placing the sapphire at the exit of the beamline would greatly reduce the alterations and work necessary to the port and make the crystal easily removable. However, the scattered neutrons from the sapphire would increase both the neutron-induced detector damage and the background radiation. MCNPX was used to simulate the crystal in the beam port and at the exit of the port.