混浊介质多光子激发显微成像的快速模型

将二维点扩散函数（PSF）和蒙特卡罗方法相结合,引入了一种研究混浊介质显微成像的快速仿真模型,将该模型用于混浊介质的多光子激发（MPE）显微成像研究,极大地提高了模拟效率,与直接蒙特卡罗方法计算结果的比较证实了该方法的正确性和有效性,此外,一个计算实例说明了混混介质的多光子激发显微成像具有比共焦荧光显微成像更优的横向分辨率。     

Simulation of low-sidelobe phased antenna array with circular polarization

Two shapes of antenna elements have been investigated and compared to obtain phased antenna arrays with circular polarization in the far field; a feed network providing a Chebyshev distribution of current amplitudes and uniform distribution of phases has been designed for 4 × 4 arrays; phased arrays with modified square and circular patches have been designed and compared, providing sidelobe reduction of up to ?26 dB.     

基于ZEMAX高功率半导体激光器光纤耦合设计

随着半导体激光器光源在激光加工领域的应用不断拓展,研制高耦合效率的半导体激光器光纤耦合模块变得十分重要。为了进一步提高光纤耦合激光二极管模块的输出功率,本文应用ZEMAX光学设计软件进行仿真模拟,将12只波长为808 nm、输出功率为10 W的单管半导体激光器通过合束方法高效率耦合进光纤。耦合光纤芯径为150μm、数值孔径为0.22,光纤输出功率为116.2 W,耦合效率为96.8%。     

Experimental validation of domain-level gradient-based and hierarchical PCE-based routing and control in heterogeneous optical networks

A domain-level gradient-based routing （DLR） algorithm for heterogeneous optical networks with syn- chronous digital hierarchy and optical transport network domains is proposed and experimentally vali- dated. This algorithm classifies domains into groups with incremental levels on the basis of domain-level partitioning, and guides paths level by level along a gradient on the basis of interdomain routing tree evolution. The proposed algorithm is implemented in the hierarchical path computation element-based control architecture for connection provisioning. Testbeds with commercial and emulated nodes are es- tablished to verify the feasibility and performance of the algorithm. Experimental and emulation results show that DLR effectively performs in terms of network blocking probability, real time characteristics, and scalability.     

Highly efficient single longitudinal mode-pulsed green laser

A novel design for a highly efficient 1-kHz single-frequency green laser is proposed.An efficient singlefrequency laser pulse output at 532-nm wavelength may be obtained by combining the injection seeding with intracavity frequency doubling in a compact U-shaped cavity formed by two plano dichroic mirrors in an end-pumping arrangement.The laser is capable of producing green pulses with a total energy of 6.3 mJ at a pulse repetition rate of 1 kHz.The pulse width is about 10 ns and the optical-optical efficiency from the 808-nm pump source to the 532-nm green output is around 12.7%.     

时基反馈控制的Tesla变压器初级电源

LC谐振充电是Tesla变压器常用的初级电容充电技术,但存在对控制时序要求高、易受电磁干扰和不具备故障保护能力等缺陷。针对这个问题,提出了一种时基反馈控制的LC谐振充电电源。该电源与传统LC谐振电源的主要区别在于,采用特殊设计的时基反馈电路取代多路时基控制器,将能量回收开关反向阻断瞬间的电压突变调制为谐振晶闸管触发信号,从而在能量回收结束时刻启动谐振充电,实现各工作回路准确按照预定时序运行。时基反馈电路由高压元件构成,不易受电磁干扰,且在原理上具备负载短路保护能力。该技术已经应用于CKP1000,CKP5000等多台Tesla型超宽谱脉冲源。实验结果表明,在强脉冲辐射环境下,该电源能够1000 Hz重频稳定运行,且能够在Tesla变压器初级短路故障时进行快速自动保护。     

光谱编码成像系统的数据压缩技术

利用时间拉伸显微成像系统观察并记录非重复动态随机现象,在其超高成像速度和高空间分辨率下必定会产生大量的数据。一种基于差分检测和游程编码的数据压缩方法,可以有效地解决时间拉伸成像系统的数据存储问题。差分检测可以消除连续相同的信号,只检测出相邻信号的差异,从而提高游程编码算法的有效性。实验中,采用扫描频率为77.76 MHz的时间拉伸显微成像对分辨率板、人红细胞和人乳腺癌细胞线性扫描成像。实验结果表明,数据压缩比可以达到8.47,对比分析发现经过差分检测方法可以获得更高的压缩比。另外,通过计算重建后的图像与原图的结构相似性(SSIM)值发现,经过数据压缩后高质量的图像可以被重建。     

Micromechanism of sulfurizing activated carbon and its ability to adsorb mercury

The effect of ambient environment (dry or wet) and overlapping laser pulses on the laser ablation performance of brass has been investigated. For this purpose, a Q-switched, frequency doubled Nd:YAG laser with a wavelength of 532 nm, pulse energy of 150 mJ, pulse width of 6 ns and repetition rate of 10 Hz is employed. In order to explore the effect of ambient environments, brass targets have been exposed in deionized water, methanol and air. The targets are exposed for 1000, 2000, 3000 and 4000 succeeding pulses in each atmosphere. The surface morphology and chemical composition of ablated targets have been characterized by using Scanning Electron Microscope (SEM), Atomic Force Microscope (AFM) and Attenuated Total Reflection (ATR) techniques. In case of liquid environment, various features like nano- and micro-scale laser-induced periodic surface structures with periodicity 500 nm–1 μm, cavities of size few micrometers with multiple ablative layers and phenomenon of thermal stress cracking are observed. These features are originated by various chemical and thermal phenomena induced by laser heating at the liquid–solid interfaces. The convective bubble motion, explosive boiling, pressure gradients, cluster and colloid formation due to confinement effects of liquids are possible cause for such kind of features. The metal oxides and alcohol formed on irradiated surface are also playing the significant role for the formation of these kinds of structure. In case of air one huge crater is formed along with the redeposition of sputtered material and is ascribed to laser-induced evaporation and oxide formation.     

Stronger Criteria for Nonseparability in n-Partite Quantum States

We investigate the multipartite entanglement in arbitrary dimensional systems, and separability criteria for nonseparability in n-partite quantum states are derived. Examples such as the generalized noisy-W state and the GHZ basis states mixed with white noise are provided to show that our criteria are independent of and stronger than previously reported ones. Our criteria can also be expressed by the elements of the density matrix, which allows a simple and practical evaluation and computation. The experimental implementation of our criteria is also discussed.     

Optical characteristics of semiconductor saturable absorber mirrors investigated by the reflection Z-scan technique

Recently, the semiconductor saturable absorber mirror (SESAM) has become a key component of passive mode-locked solid-state lasers. Here we present a simple method based on the reflection Z-scan technique to measure the key optical parameters of SESAM such as saturation fluence and modulation depth. The experimental results demonstrate that our method is able to perform with a high accuracy of 10⁻⁴ and a dynamic range of over four orders of magnitude.