Sol–gel preparation and properties of hydroxypropylcellulose–titania hybrid thin films

Hydroxypropylcellulose (HPC)–titania hybrid thin films were prepared by sol–gel method where titanium tetraisopropoxide Ti(OC₃H₇ ⁱ )₄ was hydrolyzed under acidic conditions in the presence of HPC, followed by dip-coating and drying at 120 °C for 24 h. The viscosity average molecular weight of HPC was 55,000–70,000 or 110,000–150,000, and the TiO₂/(HPC + TiO₂) mass ratio ranged from 0 to 1, which was calculated on the assumption that all Ti(OC₃H₇ ⁱ )₄ is converted into TiO₂. The films were 0.35–1.0 μm thick, transparent in visible region and opaque in ultraviolet (UV) region, where the optical absorption coefficient in UV region increased with increasing titania content. The refractive index increased with increasing titania content, ranging from 1.6 to 1.8 for the hybrid thin films. The pencil hardness increased from 6B to 5H, the durability in hot water significantly increased and the contact angle of water on films increased from 35° to 89° with increasing titania content. Crack-free films could be deposited on organic polymer substrates irrespective of titania or HPC contents, where cracking did not occur at higher HPC contents even when the substrate was bent.     

Determination of Low-Level Ethylenediaminetetraacetic Acid in Water Samples by Ion Chromatography with Ultraviolet Detection

A convenient and sensitive ion chromatographic (IC) method for the analysis of ethylenediaminetetraacetic acid (EDTA) in water samples was proposed. Using a fast reversible reaction of free EDTA and metal–EDTA complexes into Fe(III)–EDTA complex in the presence of Fe(III) ions, sample solutions were applied to an ion-exchange column using a mobile phase (pH 2.3), which was composed of 100 μM Fe(III) chloride and 5 mM methanesulfonic acid. The addition of Fe(III) solution (100 μL) containing 10 mM Fe(III) chloride and 0.5 M methanesulfonic acid to the sample solution (10 mL) permitted the injection of a large volume (400 μL) of sample, which allowed for greater sensitivity. The proposed IC method gave a highly linear (r ² > 0.999) calibration curve ranging 0.005–1.0 μM EDTA and had a limit of detection of 1.5 nM. High repeatability (RSD < 2.1%) and recoveries (88–108%) were also obtained. With this method, total EDTA level in raw and drinking waters were analyzed successfully.     

Capacitance-conductance detector for high-pressure liquid chromatography. Application to alkaloids and fatty acids

Summary A new type of detector for high-pressure liquid chromatography has been designed. This detector is equipped with a RC resonance circuit, and is similar to the capacitance detector previously reported. It is operated as a capacitance detector with nonpolar eluents; while with polar solvents, it behaves as a conductance detector. Electrolytes such as salts, acids and bases are sensitively detected. The detector was successfully used for the detection of fatty acids and alkaloids.

---

Zusammenfassung Ein neuartiger Detektor für die Hochdruck-Flüssigchromatographie wurde entwickelt. Dieser ist mit einem Resonanzstromkreis ausgestattet und ähnelt dem kürzlich beschriebenen Kapazitanz-Detektor. Als solcher funktioniert er mit nichtpolaren Eluenten, während er sich mit polaren Lösungsmitteln wie ein Leitfähigkeitsdetektor verhält. Salze, Säuren und Basen werden empfindlich nachgewiesen. Das Gerät wurde zum Nachweis von Fettsäuren und Alkaloiden verwendet.

     

Photoinduced ionic polymerization. VII. Cationic polymerization of cyclohexene oxide in solid state

Photopolymerization of cyclohexene oxide in the presence of electron acceptors was studied in a bulk system (in liquid as well as in solid states). The polymerization was proved to proceed by a cationic mechanism in both states by the effect of inhibitors. In a liquid phase the light intensity dependence of the rate of polymerization and the molecular weight distribution showed a contribution of a free ionic polymerization. Any discontinuous phenomenon in the rate as well as in the molecular weight was not discerned between liquid(above ?36°C) and plastic crystal (between ?36 and ?81°C) phases. A quantum yield of monomer consumption as high as 8 × 10³ was observed in the plastic crystal phase. Below ?81°C in the normal crystal phase the rate as well as the molecular weight was remarkably suppressed.     

Fibrinolytic effect of tissue plasminogen activator on cerebral embolism in stroke-prone spontaneously hypertensive rats.

To study the thrombolytic effect of tissue plasminogen activator (t-PA) on cerebral emboli, we characterized cerebral embolization in stroke-prone spontaneously hypertensive rats (SHRSPs) and Wistar Kyoto rats (WKYs). [125I]Fibrin clot particles (20-100 microns diameter) were injected twice at an interval of 90 min into the left internal carotid artery of WKYs and SHRSPs. After each injection, spontaneous embolus dissolution was monitored with a gamma-ray detector placed on the head of the embolic rats. Embolus dissolution was spontaneously generated in 15 min after the injection of fibrin clots. In WKYs, 21% and 42% of the clots were dissolved 30 and 90 min after the second embolization, respectively. On the other hand, the spontaneous embolus dissolution in SHRSPs was significantly lower than that of WKYs, indicating that the endogenous fibrinolytic ability of SHRSPs is less potent than that of normotensive rats. The intravenous administration of t-PA at doses of 75, 250 and 750 micrograms/kg caused a dose-dependent embolus dissolution in SHRSPs. Furthermore, systematically applied t-PA produced embolus dissolution without causing systemic plasminogen activation, fibrinogen breakdown or bleeding. In conclusion, the intravenous administration of t-PA produces selective embolus dissolution without systemic fibrino(geno)lysis in a cerebral embolic SHRSP.     

Hydrogen migrations in mass spectrometry. VI—the chemical ionization mass spectra of substituted benzoic acids and benzyl alcohols

The H₂ and CH₄ chemical ionization mass spectra of a series of series of substituted benzoic acids and substituted benzyl alcohols have been determined. For the benzoic acids the major fragmentation reactions of the protonated molecule involve elimination of H₂O or elimination of CO₂, the latter reaction involving migration of the carboxylic hydrogen to the aromatic ring. For the benzyl alcohols the major fragmentation reactions of [MH]⁺ involve loss of H₂O or CH₂O, analogous to the CO₂ elimination reaction for the benzoic acids. It is shown that the CO₂ and CH₂O elimination reactions occur only when a conjugated aromatic ring system is present, and that for the carboxylic acid systems, methyl groups and, to a lesser extent, phenyl groups are capable of migrating. The only discernible effect of substituents on the fragmentation of [MH]⁺ is an enhancement of the H₂O loss reaction in the benzoic acid system when an amino, hydroxyl, or halogen substituent is ortho to the carboxyl function. This ‘ortho’ effect, which differs in scope from that observed in electron impact mass spectra, is attributed to an intramolecular catalysis by the ortho substituent of the 1,3 hydrogen migration in the carbonyl protonated acid followed by H₂O elimination. Apparently, this route is favoured over the direct elimination of H₂O from the carbonyl protonated acid, since the latter has a high activation energy barrier because of unfavourable orbital symmetry restrictions.     

Selective reduction of tertiary alkyl,benzyl, and allyl halides to hydrocarbons using lithium 9,9-di-n-butyl-9-borabicyclo[3.3.1]nonanate

The title 9-borabicyclo[3.3.1]nonane(9-BBN) ate complex (1) brings about selective removal of tertiary alkyl, benzyl and allyl halides to give the corresponding hydrocarbons in excellent yields without concomitant attack on secondary, primary and aryl derivatives. The reduction of cis- and trans - 4 - t - butyl - 1 - methylcyclohexyl chlorides (2) with 1 gives 4 - t - butyl - 1 - methylcyclohexanes (3) with partial inversion of configuration in cyclohexane, while that in benzene gives thermodynamically stable trans-3 predominantly. The reactions of 1,1 - dimethyl - 5 - hexenyl chloride (4) and 1,7,7 - trimethylbicyclo[2.2.1]hept - 2 - yl chloride (8) with 1 proceed with the rearrangements characteristic to a carbonium ion intermediate. The reduction of 1 - ethyl - 1 - methylpentyl chloride with 1 follows a second-order rate equation.     

Ligand-exchange ion chromatographic determination of malic acid enantiomers in apple juice with photometric detection.

An ion chromatographic separation with photometric detection using a chiral copper(II) complex as the eluent has been developed for the resolution of enantiomers of malic acid in commercially available apple juices. The results obtained by this method were in good agreement with those by an enzymatic method with separation by high-performance liquid chromatography.     

High pressure and high temperature investigations in the system MgOSiO2H2O

The system MgOSiO₂H₂O was investigated at pressures between 40 and 95 kbar and at temperatures between 500 and 1400°C. The reaction products were examined by X-ray, optical and thermal analysis techniques and the density of phase A discovered by Ringwood and Major was also measured. It was found that phase A was hydrated and its chemical formula was H₆Mg₇Si₂O₁₄. When the $\text{Mg}\text{Si}$ ratio of the system is 2, phase A + clinoenstatite, and forsterite are stable at temperatures lower and higher than a boundary curve T (°C) = 10P (kbar), respectively. When the $\text{Mg}\text{Si}$ ratio of the system is 3, phase A + phase D (which is completely different from the phases, A, B and C discovered by Ringwood and Major, and any other known phases of magnesium silicate) and phase D + brucite are stable at temperatures lower and higher than a boundary curve T(°C) = 10P (kbar) + 200. Phase A has approximately an hexagonal symmetry and the space group and the lattice parameters are determined as P6₃ or $\text{P6}{}_3\text{m}$ and a = 7.866(2) Å and c = 9.600(3) Å, respectively. The measured density is 2.96 ± 0.02 g/cm³. The optical observations show that phase A is biaxial positive crystal with refractive indices α = 1.638 ± 0.001, β = 1.640 ± 0.002, and γ = 1.649 ± 0.001. Some interpretation is given on the inconsistency between the symmetry determined by the X-ray diffraction and the optical observation. The new phase D belongs to the space group $\text{P2}{}_1\text{c}$ with lattice parameters a = 7.914(2)Å, b = 4.752(1) Å, c = 10.350(2) Å and β = 108.71(5)° and is a biaxial crystal with refractive indices α = 1.630 ± 0.002, β = 1.642 ± 0.002 and γ = 1.658 ± 0.001.     

Vacancy ion-exclusion chromatography of carboxylic acids on a weakly acidic cation-exchange resin

In this preliminary study, a new approach to ion-exclusion chromatography is proposed to overcome the relatively poor conductivity detection response which occurs in ion-exclusion chromatography when acids are added to the eluent in order to improve peak shape. This approach, termed vacancy ion-exclusion chromatography, requires the sample to be used as eluent and a sample of water to be injected onto a weakly acidic cation-exchange column (TSKgel OApak-A). Vacancy peaks for each of the analytes appear at the retention times of these analytes. Highly sensitive conductivity detection is possible and sharp, well-shaped peaks are produced, leading to efficient separations. Retention times were found to be affected by the concentration of the analytes in the eluent, and also by the presence of an organic modifier such as methanol in the eluent. Detection limits for oxalic, formic, acetic, propionic, butyric and valeric acids were 0.1, 0.2, 0.3, 0.3, 0.4 and 0.5 microM, respectively, and linear ranges for some acids extended over two orders of magnitude. Precision values for retention times were 0.21% and for peak areas were <1.90%. The vacancy ion-exclusion chromatography method was found to give detection responses four to 10 times higher than conventional ion-exclusion chromatography using sulfuric acid eluent and two to five times higher than conventional ion-exclusion chromatography using benzoic acid eluent.